PDA

View Full Version : 1200whp modular powered fox, auto trans


Jivepepper
03-09-2009, 04:53 AM
From a site I frequent. Lot of power through a auto.

A little about the car:

DOHC 5.4 NVH block
Manley pistons total seal rings
Manley Billet I beams
Race Preped and Cryod FMS Crank
Ported Navi heads
MMR stage 3 turbo grinds
Twin Precision s cover BB 76mm turbos
AMS 1000 boost controller
2 air to water intercoolers one in each fender
Sullivan Intake and upper hat
12 160lb injectors
AEM EMS, CDI, Injector driver, Weapon X coils
2 Aeromotive Eliminator Pumps
Lentech Strip 4r70w
lots of suspension parts
8.8 w/3.27 gears
1180rwhp at 24lbs of boost, should have been more like 1250 or so but was blowing through the converter
best time of 8.86@163 on a 275 radial at 20lbs of boost, weighs 3860lbs with me in it

Here is a link to my car idling with 160lb injectors and mmr turbo cams on E98.

http://www.youtube.com/watch?v=b2buJhlRFFQ&feature=channel_page

and another out for a cruise, the fun happens at :20 and 1:50 the rest is just driving. Both video are in HD.

YouTube- Out for a Ride in a 1200rwhp 93 Cobra in HD

and a couple pictures:

http://pic20.picturetrail.com/VOL144/2065813/20547593/342071613.jpg
http://pic20.picturetrail.com/VOL144/2065813/20547593/354334041.jpg
http://pic20.picturetrail.com/VOL144/2065813/20547593/351444045.jpg
http://pic20.picturetrail.com/VOL144/2065813/20547593/351443849.jpg
Thanks for all your help Chris and the great people at MMR!!

Ryan
yeahloh95
03-09-2009, 06:31 AM
i saw that car at indy getting shot for 5.0 mag
Mitternacht
03-09-2009, 10:08 PM
all that power, and he has i-beam connecting rods?
White5.0
03-09-2009, 10:19 PM
that thing is sick....looks like a total sleeper with the oem rims if you take off the parachute and window net!
Jivepepper
03-10-2009, 05:59 AM
all that power, and he has i-beam connecting rods?


I quess it says billet I beam rods.
scott2001GT
03-11-2009, 11:29 PM
thats sick! I am wait for my Lentech auto tranny!
Jivepepper
03-12-2009, 10:04 AM
I wonder how it measues air flow?
Killercanary
03-12-2009, 10:08 AM
Since he's running an AEM like me, I'd assume he's using a MAP sensor to measure air flow. I no longer run a MAF on my car either.
biminiLX
03-12-2009, 10:43 AM
VERY few cars keep mass-air at those power levels.
SWEET car, I need an auto :)
-J