89stang
03-21-2009, 11:14 PM
Well I am considering buying this mach1. It is owned by a 54 year old man who only drives it on weekends. He is the second owner and the first owner did all the mods. I have read some of his posts and he has had some problems with it. The rear need welded inside the trunk(got that fixed by the dealer), it has a rattling noise by the shifter and it was staling when you were driving over 50 and thru it in neutral. Any mach owners have these problems? Also heard these cars get the "tick" from the heads too. Any help would be great! Also has the ford premium care warranty till 2010. Here is a list of mods.
http://www.mach1registry.org/forums/showthread.php?t=85163
Here are some specifics on the car if you did not know already:
-Azure Blue-limited production
-4.6L 32V DOHC V8
-5 Speed Manual
-Interior Upgrade Package
-Leather Seats
-Shaker Hood
The mods that I have included are essentially all either cosmetic or interior modifications.
List on mods is as follows:
Flowmaster Mufflers
MRT Intake
MRT Stainless Steel Catted H Pipe
Window Tint: 20% on sides, 5% on rear
Viper $500 Alarm System
Sirius Satellite Radio with Head Unit and Antenna built in
Hood Struts from MRT
Headrests Embroidered w/ Mach 1 in Blue Lettering from HRE
MGW Billet Accessories- Interior and Engine
Honeycomb Panel on Rear from CDC
Chrome Letters on Rear Valance
Brushed Aluminum Mach 1 Skid Plates
Sequential Tail Lights
Billet Fuel Door with Mach 1 Logo from UPR
Engine, Dash and Trunk signed by Scott Hoag
Hood Blacked Out
Calipers in front Painted Blue
Strut Covers
MRT Racing Banner
I do have all the original parts. The mufflers, air intake, etc… I have a 2005 mustang shift knob that I never put on the car also which is included.
Like I said before it was included in the Mustang Enthusiast Magazine and had a 4 page article about it. It has won multiple trophies from car shows that I attended. It is signed by Scott Hoag who was the President leader of the development for the Mach 1 and Bullitt Mustang development at Ford. He’s now the President of MRT (Mustang Racing Technologies)
The car has all receipts for maintenance (oil changes, etc.) I washed around once a week, waxing about every 3 weeks. I made sure to use microfiber wash mitts and towels to wash it with. I also found Swifter Dusters worked great on the engineJ
http://www.mach1registry.org/forums/showthread.php?t=85163
Here are some specifics on the car if you did not know already:
-Azure Blue-limited production
-4.6L 32V DOHC V8
-5 Speed Manual
-Interior Upgrade Package
-Leather Seats
-Shaker Hood
The mods that I have included are essentially all either cosmetic or interior modifications.
List on mods is as follows:
Flowmaster Mufflers
MRT Intake
MRT Stainless Steel Catted H Pipe
Window Tint: 20% on sides, 5% on rear
Viper $500 Alarm System
Sirius Satellite Radio with Head Unit and Antenna built in
Hood Struts from MRT
Headrests Embroidered w/ Mach 1 in Blue Lettering from HRE
MGW Billet Accessories- Interior and Engine
Honeycomb Panel on Rear from CDC
Chrome Letters on Rear Valance
Brushed Aluminum Mach 1 Skid Plates
Sequential Tail Lights
Billet Fuel Door with Mach 1 Logo from UPR
Engine, Dash and Trunk signed by Scott Hoag
Hood Blacked Out
Calipers in front Painted Blue
Strut Covers
MRT Racing Banner
I do have all the original parts. The mufflers, air intake, etc… I have a 2005 mustang shift knob that I never put on the car also which is included.
Like I said before it was included in the Mustang Enthusiast Magazine and had a 4 page article about it. It has won multiple trophies from car shows that I attended. It is signed by Scott Hoag who was the President leader of the development for the Mach 1 and Bullitt Mustang development at Ford. He’s now the President of MRT (Mustang Racing Technologies)
The car has all receipts for maintenance (oil changes, etc.) I washed around once a week, waxing about every 3 weeks. I made sure to use microfiber wash mitts and towels to wash it with. I also found Swifter Dusters worked great on the engineJ