PDA

View Full Version : 5 lug swap and rear disc



stangr6man
03-29-2009, 07:41 PM
For my 1990 gt. What do you got?

blksunshine88
03-29-2009, 08:29 PM
i have the rear disc setup for a 94-98 car if you're interested PM me

1slow46
03-29-2009, 10:18 PM
i have front spindles and calipers and brackets off a 2003..let me know if interested

stangr6man
03-30-2009, 11:41 AM
would like to find parts of 94 - 95 for the front. Aren't the 2003's alot wider?

jaa55
03-30-2009, 01:19 PM
my car with 2001 spindles

http://img135.imageshack.us/img135/5673/cimg1004ph7.jpg

the newer spindles are a must if your going to run the 2005 up wheels, im running 01 cobras

1slow46
03-30-2009, 02:44 PM
would like to find parts of 94 - 95 for the front. Aren't the 2003's alot wider?


i think the control arms make them wider not the spindles....i could be wrong

jaa55
03-30-2009, 03:28 PM
no its the spindles that make it wider, but it doesnt matter on the right wheels

stangr6man
03-30-2009, 03:38 PM
can you run 17x9 in the front without rubbing with the 99+ spindles?

jaa55
03-30-2009, 04:32 PM
depends on the offset and the backspacing

blkp42e
03-30-2009, 05:31 PM
i just picked up a full swap out of the junkyard dirt cheap

1slow46
03-30-2009, 05:42 PM
no its the spindles that make it wider, but it doesnt matter on the right wheels


i know for a fact that the a arms off a fox are also shorter than the a arms on a 99+

jaa55
03-30-2009, 05:55 PM
i know for a fact that the a arms off a fox are also shorter than the a arms on a 99+


yes they are longer too, but the spindle is also wider. i think the a arms were longer by like 1.5 to 2 inches when i measured them

blizzard
03-30-2009, 06:10 PM
should use the 94+ balljoints and struts too ;)

jaa55
03-30-2009, 07:27 PM
should use the 94+ balljoints and struts too ;)

+1 on the struts, the foxes are too short.....or at least right on the edge

stangr6man
03-31-2009, 09:43 PM
i just picked up a full swap out of the junkyard dirt cheap

what did you end up paying?

blkp42e
03-31-2009, 10:16 PM
basically nothing. got a STEAL on the entire car though

selling other parts i took off the car paid for my swap.

stangr6man
03-31-2009, 10:30 PM
basically nothing. got a STEAL on the entire car though

selling other parts i took off the car paid for my swap.

i would like to find an entire car for the swap.

1slow46
04-01-2009, 01:20 PM
i have spindles, calipers,pads and brackets....just dont have rotors..let me know

stangr6man
04-01-2009, 01:25 PM
i have spindles, calipers,pads and brackets....just dont have rotors..let me know

They are off a 99+ right? I would like to get some older ones so i can run normal backspacing.

1slow46
04-01-2009, 01:51 PM
They are off a 99+ right? I would like to get some older ones so i can run normal backspacing.

no problem

stangr6man
04-10-2009, 05:17 PM
wanted to thank everyone for the parts offers. I ended up getting everything locally. Got everything off of a 97 and i got 95 spindles for $130. If anyone is looking for 97 spindles i got some.

Thanks again guys.