PDA

View Full Version : New Engine preview pics


Rio94gt
08-25-2009, 09:53 PM
Well its finally finished and it will be here on Friday.

Heres two quick pics the engine builder took. Ill get more on friday and itll have the intake on it.

Enjoy cause i know i will.
White5.0
08-25-2009, 10:08 PM
if there was a beat-off smiley, i would choose it for this thread
wick
08-25-2009, 10:12 PM
if there was a beat-off smiley, i would choose it for this thread
:jackit:<<<<<<<<<<<<< This one...


Looks real nice Billy!!!
Rio94gt
08-25-2009, 10:14 PM
Two More :highfive:
White5.0
08-25-2009, 10:16 PM
:jackit:<<<<<<<<<<<<< This one...


Looks real nice Billy!!!

nah thats like saying " you are a jackass your engine is gay"

i was thinkin more like "i just busted a nut" type of smiley haha
biminiLX
08-25-2009, 10:49 PM
Lookin good, you using a stock block? plan on testing it's limit? what details on the build?
Easy to do with 408+boost, you will have BIG power dude.
-J
shawnsvtcobra
08-25-2009, 10:51 PM
Very nice man, congrats.
Sonic03snake
08-25-2009, 10:55 PM
Lookin good!!! Trim that timing cover gasket when you get it, LOL.
Rio94gt
08-25-2009, 10:58 PM
Quick rundown

Yes, its a stock 72' block.
9.0 to 1 compression
Forged Crank, H-Beam Rods, and Pistons
0 Balanced
Trick Flow Fast As Cast Heads set up by Jay Allen
-Competition Bowel Blend
-Titanium locks and retainers
-Ferra 1000 valves
-Springs matched to Cam
-Comp Ultra Gold Rockers
Custom Solid Roller Cam by Jay Allen
-600ish lift (and ill leave it there) Shift point @ 6800 RPMs
Edelbrock Super Victor EFI Intake

For now its going to be a Vortech Si trim @ about 12 psi unless i buy a bigger one.

Will it push the limits? Guess well see.
AdamantiumSilvr
08-25-2009, 11:05 PM
Heck of a build!
yeahloh95
08-25-2009, 11:22 PM
that looks great i bet it will make some big power
2001GTTT
08-25-2009, 11:29 PM
looks sick Billy
somethingclever
08-25-2009, 11:44 PM
Why are cam specs a secret?
Rodeheaver's
08-26-2009, 12:11 AM
looks evil, mean, and nasty!!
gmkillr
08-26-2009, 02:51 AM
Looks like someting that could help you move your vehicle from point A to point B..........In 9 seconds or less........
SonofaBish
08-26-2009, 07:58 AM
looks sick! :goodidea:
biminiLX
08-26-2009, 08:07 AM
Quick rundown

Yes, its a stock 72' block.
9.0 to 1 compression
Forged Crank, H-Beam Rods, and Pistons
0 Balanced
Trick Flow Fast As Cast Heads set up by Jay Allen
-Competition Bowel Blend
-Titanium locks and retainers
-Ferra 1000 valves
-Springs matched to Cam
-Comp Ultra Gold Rockers
Custom Solid Roller Cam by Jay Allen
-600ish lift (and ill leave it there) Shift point @ 6800 RPMs
Edelbrock Super Victor EFI Intake

For now its going to be a Vortech Si trim @ about 12 psi unless i buy a bigger one.

Will it push the limits? Guess well see.
Very nice combo.
My only suggestion is that you may not need (or want) 6800rpm.
Less rpm always saves parts.
-J
Rio94gt
08-26-2009, 08:25 AM
I hear ya. I forgot to mention that it has a 2.75 cleveland main bearing in it. That will help with the RPMs.
gmkillr
08-26-2009, 08:30 AM
The pics look awesome bud!

I cant wait to see this badboy in person!:thmbsup:
yeahloh95
08-26-2009, 09:03 AM
How Did You Do 2.75 Mains In That Block ?
CobraII
08-26-2009, 09:03 AM
Mmmmmmm engine porn..... :hyper:
Looks awesome!!
MBH
08-26-2009, 10:21 AM
http://i260.photobucket.com/albums/ii21/MBH_427/funny%20pics/fapfapfap.jpg

That's sick Billy, keep those pics coming!!
street591
08-26-2009, 10:27 AM
Looks good! Keep em coming


and a vid when its installed :thumbsup:
no1fordgirl
08-26-2009, 11:19 AM
wow, looks great! Congratulations :thumbsup:
Rio94gt
08-26-2009, 03:44 PM
How Did You Do 2.75 Mains In That Block ?

Ask Woody @ Fordstrokers
yeahloh95
08-26-2009, 03:54 PM
he must use .125 thick bearings ????
412mustangz
08-26-2009, 05:12 PM
looks sick, i'd like 2 get me one of those!
scott5
08-26-2009, 05:18 PM
that looks awesome!
Rio94gt
08-26-2009, 05:34 PM
he must use .125 thick bearings ????

I dunno. When i called to order it and told him what i was doing the first two things he said was 0 balance and 2.75 main.
yeahloh95
08-26-2009, 05:38 PM
oh ok you can rev it more with the 2.75 mains they are easier to keep oil on
Rio94gt
08-26-2009, 05:45 PM
Thats exactly what he said. He said 7000 wouldnt be a problem and thats about where my cam came out to be.
wick
08-26-2009, 05:48 PM
Looks like someting that could help you move your vehicle from point A to point B..........In 9 seconds or less........

Yeah, something you have not been able to achieve yet. HAHHAHAHAHAHAHAHAHHAAHHAHAHHA:rofl:
TJH64
08-26-2009, 05:58 PM
That thing looks badazz. I'm sure it will be a runner. I had those guys do my 347, and I will vouche that their stuff makes power:thmbsup:
somethingclever
08-26-2009, 07:07 PM
Thats exactly what he said. He said 7000 wouldnt be a problem and thats about where my cam came out to be.



You mean the secret cam?
Rio94gt
08-26-2009, 08:38 PM
Haha, Secret cam.

Its no secret. Just a lil 600ish solid roller.
fork5o
08-26-2009, 09:25 PM
thats a sick looking bullet. cant wait to see what it puts down.

btw, if that's your '00 in the lot by the 16th street bridge, it looks good. i think a little tint would set it off. :thumbsup:
Rio94gt
08-26-2009, 09:32 PM
thats a sick looking bullet. cant wait to see what it puts down.

btw, if that's your '00 in the lot by the 16th street bridge, it looks good. i think a little tint would set it off. :thumbsup:

I cant wait either.

Yes that is my 00'GT that sits by the 16th street bridge. I work at the Medical Examiners Office on Penn Ave. Thanks and ive considered tint. Just never got around to doing it. :thmbsup: