Stock bottem end 570whp 494tq

[fmfkid250]

So this crazy kid came up and used my dyno today.It was a supercharged notchback green with a primer hood. It made insane power at only 11psi. Its a 5 speed car. He said he is going to take everything out on the street this weekend!

I was shocked that a stock motor can handle that kind of power.


Anyone know the car?

[u1arunit]

Does not sound like a stock displacement 5.0 with those numbers. What is the combo?

[fmfkid250]

It has some oversized looking supercharger. I am pretty sure its a 5.0 bottem end. out of a 91.

[Rodeheaver's]

i know the car....

[u1arunit]

i know the car....

Combo?

[Rodeheaver's]

Combo?
its a secret to everyone..

[yeahloh95]

i think i know who it is too

[u1arunit]

its a secret to everyone..

Bah! I only wanted to know because the numbers seem artificially too high. No biggie..

[AdamantiumSilvr]

I might of just met him a few days ago.

[fmfkid250]

It's in the wrong section! It's no modular. Damnit

[billyNOTnice]

i don't see what's hard to believe about it. in fact where i come from i'd say those numbers are pretty common :)

[u1arunit]

i don't see what's hard to believe about it. in fact where i come from i'd say those numbers are pretty common :)

Back when I was into the 5.0 cars, 11 PSI on a SC 5.0 combo with a stock bottom end (302 CU IN) did not USUALLY make that kind of power. About 400RWHP was the norm on stock CU IN/alum heads/mild cam combo.

Must be some SUPER SECRET mods to that car. ROTFL!!!!!!!!!!! :rofl:

[Pure Stock]

Decent N/A H/C/I cars with a stock bottom end will usually make *around* 330 to the tires. That 11 psi power adder is adding roughly 240 to the ground. Sounds like someone has done their homework on that combo. Shit, most of them coraller's would be happy if their blown 347 was near that level.

[gmkillr]

570 rwhp sound about right to me if you have any clue what your doing. Hell my stock longblock with a cam was making near 550 rwhp, and that with the crappy stock gt-40 irons. If you have h.c.i. and a blower and make anything less than 575 - 600 I would have to say you have no clue whats going on. This is extremely simple to do. How long a stock bottom end will live under 600 rwhp is another story though........lol

[wick]

No secrets here. Its my old motor. It is a stock bottom end. The only thing done to the bottom end were bearings from me. Pistons never left the bores. I have the sheet on my phone but I will let the owner post it up. Only making 11.79PSI boost with a novi2000. All off the shelf parts, nothing ported or worked over either. And in only has 42lb injectors. HAHAHAHAH

[wick]

Decent N/A H/C/I cars with a stock bottom end will usually make *around* 330 to the tires. That 11 psi power adder is adding roughly 240 to the ground. Sounds like someone has done their homework on that combo. Shit, most of them coraller's would be happy if their blown 347 was near that level.

Exactly!!!


570 rwhp sound about right to me if you have any clue what your doing. Hell my stock longblock with a cam was making near 550 rwhp, and that with the crappy stock gt-40 irons. If you have h.c.i. and a blower and make anything less than 575 - 600 I would have to say you have no clue whats going on. This is extremely simple to do. How long a stock bottom end will live under 600 rwhp is another story though........lol

This is true. It will not last but its fun!!!

[yeahloh95]

No secrets here. Its my old motor. It is a stock bottom end. The only thing done to the bottom end were bearings from me. Pistons never left the bores. I have the sheet on my phone but I will let the owner post it up. Only making 11.79PSI boost with a novi2000. All off the shelf parts, nothing ported or worked over either. And in only has 42lb injectors. HAHAHAHAH

you can't make that kind of power withonly 42 lb inj.

[Rodeheaver's]

you can't make that kind of power withonly 42 lb inj.
maybe the dyno numbers are smugged??

[wick]

It runs a good bit of fuel pressure.

[u1arunit]

Rob how much power did it make when you had it?

[map351]

Good time to start a death pool!

[venom]

nice. my car made about 540 with 42's, and they were just about maxxed out. that motor probably wont hold together for long if its being out to work.

[wick]

Rob how much power did it make when you had it?


It was all screwed up when I had it. The crank wobbled (due to a shitty edelbrock timing set), had stock heads. Same cam, same intake and longtubes. 44lb injectors running a 60%duty cycle. It did 397.66/397.71. All at less than 5000rpm. We didnt want to go any higher than 5 with the crank.

Now, its just off the shelf bolt ons, HCI.

[torqueboxer]

I was there when the heads got bolted down its a scum stock bottom end. nothing fancy. just boost and a heavy right foot...nothing magic. my 351w street car put down 431 on the same dyno.

[fmfkid250]

9's :jump:

[scott5]

570 rwhp sound about right to me if you have any clue what your doing. Hell my stock longblock with a cam was making near 550 rwhp, and that with the crappy stock gt-40 irons. If you have h.c.i. and a blower and make anything less than 575 - 600 I would have to say you have no clue whats going on. This is extremely simple to do. How long a stock bottom end will live under 600 rwhp is another story though........lol

I would say this is kind of a stretch to say, but yet i guess the dyno numbers really dont matter, just what happens going down the 1/4 mile

[Silverhatch]

Is your dyno a mustang dyno or dynojet?

[went9s]

Wow i feel like Joe(Purestock) now .lol
I have been working with this h-c-i combo for 5 years but went to the novi 2000. Was running base fuel pressure in the over 60psi.:goodidea:
The tune is set on kill. timing so high i wont post because you call me a lier. :rotflol:This was done on pump gas..
I will be at the track wensday to be one of the few people that run in the 9's with a stock shortbock.

[fmfkid250]

It is a dynojet dyno.

Adam Mid october, I am going to call you out on the street with the wrong wheel drive. Big race in the begining of oct.

I am giving you heads up I am going to use my vtec. and a 154mph trap speed.

[went9s]

warning to you. we are running from a dig.:goodidea: 644 hp and a wrong wheel drive car you will spin every gear.:rotflol:

[went9s]

I dont think either motor will last that long.lol

[billyNOTnice]

vids!!!!!

[fmfkid250]

I dont think either motor will last that long.lol

Track wendsday? first pass lets go!

[RUTHLESS]

Man you pushrod guys are going to force me turn up the wick on my car. Why do you do this to me?!? :sticktonge: Oh and your cars lighter! Aaaahhhhh crap!! lol


BTW Sweet setup! I would like to see it in action.

[went9s]

I hope to get at least one good run. :rolleyes: The car weighs 3150 with me.lol

[went9s]

PRP wensday bring your camera.

[RUTHLESS]

PRP wensday bring your camera.

PRP is on the other side of the world from me so work days dont/cant work. I tried once and didnt think it was as far as it turned out. :rolleyes: Oh well I am sure I will get to see a vid. Good luck!!

[yeahloh95]

are you going to be able to shift it?

[Pure Stock]

are you going to be able to shift it?

Hey man, I've been meaning to ask you about this guy that drives other people's rides when they are looking for that elusive e.t. Can you believe his buddy passes out business cards and places them under the wipers at M.I.R. I've heard over on another forum that there have been some of the same business cards found on T-n-T nights at Atco as well. They claim that the guy who does the hotshoe driving goes by the two letters T.C. I'm saying who in the hell shows up at the track with no vehicle in hand and drives other peoples' rides to new bests and has his buddy passing out them dumb cards. Shhh, some people.

[went9s]

I put a auto in it......lol cant shift with the broken elbow and shoulder.:thumbsup:

[crazylou]

c u wed. jimmy and all are comin up...

[AdamantiumSilvr]

...was nice meetin n BS'n with u the other day. Car sounded and looked like it ran great pullin out, for sure!! Catch u out and about!

I put a auto in it......lol cant shift with the broken elbow and shoulder.:thumbsup:

[went9s]

it was nice meeting you 2 . did you find out what was wrong with your car?

[torqueboxer]

lol u sittin in the car only adds 100lbs to it....LOL its like havin a toddler at the wheel!! death to the E7TE block!!!

[coralcoupe1993]

This was a fun thread to follow. So... did the car with the crazy high E7 powered HP run down the track?

[wick]

This was a fun thread to follow. So... did the car with the crazy high E7 powered HP run down the track?
As we speak. I am waiting for this fool to call me back with the numbers.

[went9s]

One of my 28 11.50 et street's got ripped on the way to the track.:rolleyes: I will be up there this weekend. I am thinking about 3 inch exhaust. and spray.lol

[bgblockelcamino]

had similar problem happen to me when i first started going to PRP. first time i somehow cracked a cap on way up to track. ran a best of 20.10 lol
next week i got a flat had to fix it at export tire ran 14.50 that week lol. just seems like it eluded me to go to track lol.

good luck next week then

[coralcoupe1993]

One of my 28 11.50 et street's got ripped on the way to the track.:rolleyes: I will be up there this weekend. I am thinking about 3 inch exhaust. and spray.lol


Spray it! It might spit like a log but it will be fun!

[AdamantiumSilvr]

...had a brokin rocker arm on #6! Was gonna do a set of cams if he had to dig into the engine more, while it was opened up. But it wasn't nearly as bad as we all thought it would be thou. So I'm gonna do a quick tune/dyno pull while its there and lookin to do some sub-frame connectors too.

it was nice meeting you 2 . did you find out what was wrong with your car?

[went9s]

thats good you really lucked out.

[AdamantiumSilvr]

...for sure!! But I would of really luved to get those cams in there.

thats good you really lucked out.

[fmfkid250]

I heard this thing runs weaksause.