PDA

View Full Version : trick flow streetburner?


Gray 5.0
10-07-2009, 05:18 PM
im ordering a upper/lower tfs street burner. my ? is should i buy a 1 inch spacer as well any help??? thanks
scott5
10-07-2009, 05:26 PM
Yea it will help with disipating (sp?) heat
Gray 5.0
10-07-2009, 05:32 PM
i have a 1 inch on my ported stockers so i figured y not with these
scott5
10-07-2009, 05:42 PM
i have a 1 inch on my ported stockers so i figured y not with these

i thought your motor had heads and a cam in it? Why you only going with a street heat? why not track heat?
wick
10-07-2009, 06:51 PM
Just do a statemax and be done. Best intake out there.
scott5
10-07-2009, 07:22 PM
Just do a statemax and be done. Best intake out there.

depending on the combo i agree and as price is considered i also agree, and for what he has then yes i would aslo go systemax
cam303
10-07-2009, 08:39 PM
You guys are so smart.
scott5
10-07-2009, 09:04 PM
You guys are so smart.

what would you suggest?
cam303
10-07-2009, 10:55 PM
what would you suggest?

The holley. I was agreeing with you.
Pure Stock
10-08-2009, 01:16 AM
Just do a statemax and be done. Best intake out there.

Who makes that intake? PA, VA, OH?:)
wick
10-08-2009, 04:45 AM
Who makes that intake? PA, VA, OH?:)


HAHAH Smart ass. Blackberry touchscreen and cold fingers dont mix well. HAHAHAHHA
yeahloh95
10-08-2009, 06:45 AM
what is this statemax you speek of is it better than the system max ???
Gray 5.0
10-08-2009, 01:27 PM
i do have heads n cam. my upper n lower plenums are ported stock 5.0 ones
Gray 5.0
10-08-2009, 01:29 PM
my cam is idle to 5500 the street burner is the same y go with the track heat its a 1500 to 6500 i dont need that
yeahloh95
10-08-2009, 02:26 PM
because the street burner won't flow enough air to make more than 300 to the tire,
Gray 5.0
10-08-2009, 02:34 PM
what if it gets ported?
Gray 5.0
10-08-2009, 02:42 PM
either way its better than what i had and i already ordered it yesterday so thats whats going on it. thanks for the input. i was leanin towards the systemax but just went with this. im 17 its mostly a dd it doesnt have to run 10's and im happy with it
wick
10-08-2009, 05:04 PM
what if it gets ported?


Then your at more cost than a SysteMax. Why not just buy that insead. No porting needed and it makes a ton of power everywhere.