what size belt for UD pulley

[J-rod]

what size belt do i need for a UD crank pulley. i want to get one and install it. not selling anymore...no need too...so i want to install it...it will go good with my other spring parts.

:pepper:


pulley in question:
http://i29.photobucket.com/albums/c267/jcvince17/FORSALE.jpg

[04yellowcobra]

Best bet is to just install everything and just measure your belt routing with a string or piece of wire. Then just take the old belt to the part store and tell them you want one the same just shorter.

[wick]

You might not need to change the belt. The lower pully is smaller but the other ones are bigger. It kinda balances out.

[INSANELY CRAZY]

take an old belt cut it to length then take to part store to match up to good belt...

[fast4ord]

An actual tape measure works too.

[fast4ord]

wrap the tape measure around the pulleys as you would a belt. and it will give you length in inches.

[lib88stang]

wrap the tape measure around the pulleys as you would a belt. and it will give you length in inches.

I agree with Don, very easy:thmbsup:

[J-rod]

i know how 2 do it...just thought someone knew what size. like i have a list of sizes for 3.8 and 4.6 motor UD belt sizes.

[Viper_ed]

Well, without knowing the dia. of the pulley, it might be easier picking this weeks winning Powerball Numbers. :dunno:

[Troll]

Well, without knowing the dia. of the pulley, it might be easier picking this weeks winning Powerball Numbers. :dunno:

...and yet his sig says :flip: troll and not :flip: ed. :balls1: :balls1: :balls1:

[lib88stang]

...and yet his sig says :flip: troll and not :flip: ed. :balls1: :balls1: :balls1:

:rotflol: :rotflol:

[J-rod]

suddenly i remember why i like SCS

:rolleyes:

[J-rod]

pulley is 4.5" O.D.

[wick]

Well, without knowing the dia. of the pulley, it might be easier picking this weeks winning Powerball Numbers. :dunno:


HAHAHAHAHAHAHAHAHA:biglaugh: :laughing1: :biglaugh: :rofl: HAHAHAHAHAHA

[Viper_ed]

pulley is 4.5" O.D.

Well, that's VERY close to a 93 Cobra Crank pulley. If you can find a belt listing for the 93 Cobra, that may work. Keep in mind if the smog pump has been removed, it will be a total guessing game.


$hit, I wasn't supposed to help! :upyours:

[Balaska347]

If all you are doing is add under drives you should be able to use the same belt. The tensioner should take the slack out. There isn't that big of a difference in the pulley size.

[Troll]

If all you are doing is add under drives you should be able to use the same belt. The tensioner should take the slack out. There isn't that big of a difference in the pulley size.

i think he's just replacing the crank pulley. never can tell which personality is talking in sentence fragments.

also, if you can't fix that dipstick, you sure as hell ain't gonna get that crank pulley off there. :laughing:

[Viper_ed]

also, if you can't fix that dipstick, you sure as hell ain't gonna get that crank pulley off there. :laughing:

:rollingfloorrlol: Guess the fact that a wrench is NOT involved when it comes to the dip stick must be confusing. :balls1:

[Balaska347]

You guys crack me up. SCS has some of the best entertainment.:rollingfloorrlol:

Jared, I'm sure your a good guy, but sometimes I think you should drive a ricer with a coffee can and a dragster wing on the back.

[J-rod]

:rolleyes:

fvck you all

[J-rod]

not everyone is blessed with a nice garage and any tools needed....i only have my craftsman 250 pc kit and a snow filled parking spot.

thats why i go to my dads in pburg to do most work.

[J-rod]

i do apologize for thinking this was a good place for help. i just figured alot of you all have or have had fox 5.0 and probably have ran a UD pulley at one time and would know what size to buy. i know how to measure for a fvcking belt. I did not once ask how to measure for a belt.

every fvcking time i post something on here for help all i get is smartassed remarks and comments on me being fvcking stupid.

[Steve-0]

The stock belt may work, I know it does on the 95. So it might work fine with the stock one in there. If it ends up being slighty loose after a while, just get a slightly smaller belt for when the other one wears out.

[87notch]

Well, without knowing the dia. of the pulley, it might be easier picking this weeks winning Powerball Numbers. :dunno:

:rofl:

[87notch]

i do apologize for thinking this was a good place for help. i just figured alot of you all have or have had fox 5.0 and probably have ran a UD pulley at one time and would know what size to buy. i know how to measure for a fvcking belt. I did not once ask how to measure for a belt.

every fvcking time i post something on here for help all i get is smartassed remarks and comments on me being fvcking stupid.

I dont think that anyone thinks your stupid but when you get all bent out of shape over some jokes people are going to continue to do it,just to get a reaction out of you thats what makes it funny.

[Twin01cobra]

:iagree:

[J-rod]

it gets really old being the butt of all the jokes around here.

i asked if anyone knew the belt size for runing a UD crank pulley. never did i ask how do you measure for a belt. there is a big difference.


and now its fvcking raining outside....hooray for me....maybe you all can make some kind of joke out of that.

[J-rod]

FWIW - you can run the stock belt when installing the crank/water pump/alt pullies together...from what i have found.

just the crank requires a little shorter belt that nobody can answer.

[INSANELY CRAZY]

You guys crack me up. SCS has some of the best entertainment.:rollingfloorrlol:

Jared, I'm sure your a good guy, but sometimes I think you should drive a ricer with a coffee can and a dragster wing on the back.

or this.... http://pittsburgh.craigslist.org/car/281557852.html :biglaugh:

hey jared, im thinking try a 72" belt and go from there... as long as you dont run the belt you can take it back to find the correct size.:awsome:

[fast4ord]

it gets really old being the butt of all the jokes around here.

i asked if anyone knew the belt size for runing a UD crank pulley. never did i ask how do you measure for a belt. there is a big difference.


and now its fvcking raining outside....hooray for me....maybe you all can make some kind of joke out of that.

We must not know, thats why we told you to measure, i never ran only a crank pulley, always ran all the underdrive pulleys. They suck anyway, overheat, and hardly charge for a couple horespower??:dunno: I really think i am going to quit reading this B.S.

[lib88stang]

I have ran soo many different size belts on the car since I've had it. with underdrives, with no AC, with no AC or smog, and then I decided to route the belt a differnt way. So there are many sizes you may need or can use thats why you should measure.... And I'm sure some how its your fault its raining:yes:

[Pure Stock]

Who needs serpentine belts:rolleyes: