JD's new pony!

[map351]

Joe Larames new Pinto.. :thmbsup:
It's powered by a SVO tall block ARCA Alum head with 2 650 carbs should be well over 1000Hp.

http://s93.photobucket.com/albums/l66/hellfirejim/joes%20pinto/

http://i11.photobucket.com/albums/a198/CurtisHensley/Picture650.jpg

http://i11.photobucket.com/albums/a198/CurtisHensley/Picture648.jpg

http://i11.photobucket.com/albums/a198/CurtisHensley/Picture653.jpg

http://i11.photobucket.com/albums/a198/CurtisHensley/1253308737.jpg

http://i233.photobucket.com/albums/ee171/4-BarrelMike/Pinto/Larameesnewmotor.jpg

[Sonic03snake]

:bananabang:

[somethingclever]

That driveway woudl be sooooo sweet if it were paved...donuts everyday after work.

[laz2447]

Sick...

[Martin0660]

That driveway woudl be sooooo sweet if it were paved.

I think the bulk of thew money went into Chrome moly and carbon fiber :D

I can;t wait to see what that thing does in shakedown. I will be real curious how the dual carbs work :slaphappy:

[yeahloh95]

mmmm carbon

[map351]

Will it make 250 a hole? :)

http://i11.photobucket.com/albums/a198/CurtisHensley/Picture593.jpg

http://i11.photobucket.com/albums/a198/CurtisHensley/Picture596.jpg

[scott5]

that thing is crazy

[biminiLX]

WOW, would love to hear that, probably can hear every cylinder fire :)
-J

[Martin0660]

would love to hear that

Should be able to catch him at Milan, Columbus, and maybe Norwalk. He is also talking about coming over here for a day ;) Lot's of shakedown on that new combo, but it should be SWEET when sorted out.

[phillysrt4]

Please stop posting cars like this. Every time I see one it makes me want to scrap my project plans for something different :goodidea::rofl:

[PaxtonShelby]

Wow - that has to be a hoot...

I hope he ditched the stock fuel tank for a fuel cell...:rolleyes:

[phillysrt4]

either way that thing is going to fly! :thumbsup:

[Martin0660]

Every time I see one it makes me want to scrap my project plans for something different

Different is good :D At some level, I'm really considering blow through carb as the set-up for my Pinto. We will see how the new Capri combo works before making a final decission ;)


I hope he ditched the stock fuel tank for a fuel cell

That would be the big black tank in the nose. Seems like I would rather have it in the back on a drag car :D

[AdamantiumSilvr]

That's the baddest@$$ Pinto if I ever seen one!!

[349Stroker]

guy down the road from me in orbisonia has a 2.3 based motor in a pinto with a BIG single turbo and EFI. Car went low 8's last time I talked to him.He was shooting for the 7's but not sure if he made it

[1Badbird]

Oh man that is sweet!!

[yeahloh95]

guy down the road from me in orbisonia has a 2.3 based motor in a pinto with a BIG single turbo and EFI. Car went low 8's last time I talked to him.He was shooting for the 7's but not sure if he made it

thAt was probably fred house he is the one with the fast probe he runs at mason dixon

[349Stroker]

That's him

[map351]

Fred's Probe..

http://c3.ac-images.myspacecdn.com/images02/110/l_4850f1aff7f94cfe8515dd8de3266a92.jpg

http://c3.ac-images.myspacecdn.com/images02/90/l_314c723b986449bab3754ba774e79e22.jpg

http://c3.ac-images.myspacecdn.com/images02/109/l_30063743613f4e22b9999751edf27e86.jpg

[349Stroker]

thats a mid 8 ride too. must be nice to have two 8 second cars

[map351]

I think Don Nase jr had the quickest 2.3 turbo base power.. 7.414 / 183.980

http://www.dragtimes.com/images/1105277602nopihouston2.jpg

[Martin0660]

guy down the road from me in orbisonia

If I was that close, I would be using Fred as an engine builder :D I'm a good distance from him and he will probably do my next shortblock :D

BTW - I have not heard of him doing much with the Pinto lately. They are running those pro-stick races pretty serious with the Probe.

[yeahloh95]

yes he does do good machine work , he is not far from me either

[biminiLX]

BTW, how many inches do you get with a tall deck SVO block like that?
I'm guessing its bigger than 2.3L ;)
-J

[349Stroker]

If I was that close, I would be using Fred as an engine builder :D I'm a good distance from him and he will probably do my next shortblock :D

BTW - I have not heard of him doing much with the Pinto lately. They are running those pro-stick races pretty serious with the Probe.



yea he is into the probe more now

[349Stroker]

BTW, how many inches do you get with a tall deck SVO block like that?
I'm guessing its bigger than 2.3L ;)
-J



coulda swore Fred said the motor he was building at one time was stroked out to 2.8L or 3.0L

[map351]

BTW, how many inches do you get with a tall deck SVO block like that?
I'm guessing its bigger than 2.3L ;)
-J

170 ci

[Martin0660]

BTW, how many inches do you get with a tall deck SVO block like that?
I'm guessing its bigger than 2.3L ;)
-J

Most guys don't tell ;)

A lot of them are in the 2.85 range and grow over time. Most guys leave room to fix them if they dink a hole so they usually start out smaller and grow them :D There where only ~100 of those blocks made so they command a huge premium when they go on the market.

This engine in Joe's car, House, Nase, and Hubers all run the tall deck stuff. Joe does have other "small" engines and Nace has moved on to the 2.0 ecotec program in a dragster last I knew.

Fast Dave Flanders is the guy doing amazing things with a production 2.5 block :D

[map351]

Joe had the new Pinto out for a few shake down passes 156ci.

"It was the 8th full pass so i was pleased with that... Rick Bommarito drove the car. He had been driving it geetting the chassis sorted out. Dave will test the car in the next week or so and the drive the car at Colubus.

1st pass-16-17psi A lot rich 9.3-9.8 afr
Rt. way late
60ft. 1.306
330 3.855
1/8th 6.01
MPH 114.08
1000ft.7.899
1/4 9.499
MPH 142.01

2nd Pass 20-21psi A little rich 9.8-10.4 afr
60ft.1.34
330 3.890
1/8th 5.988
MPH 119.75
1000ft.7.817
1/4 9.363
MPH 146.54

3rd. pass 24psi Safe 10.4-10.9 afr
60ft. 1.274
330 3.676
1/8th 5.706
mph 121.99
1000ft. 7.471
1/4 8.968
mph 151.09

Thats the three passes we made last night.,Joe"

http://i11.photobucket.com/albums/a198/CurtisHensley/Picture650.jpg

http://i11.photobucket.com/albums/a198/CurtisHensley/Picture596.jpg

[97LaserRed]

Holy Frank that's fast!!!

[PaceFever79]

Bad ride! Which part is Pinto? :rofl:

[biminiLX]

Wow, nice, and I'm assuming it'll take more than 24psi right? ;)
-J

[map351]

I think 30+.

[Martin0660]

Wow, nice, and I'm assuming it'll take more than 24psi right? ;)
-J

Everything is sized for 30+, heard talk of 35 psi in the end. Joe is having eye issues, but the car is supposed to be with us at Columbus NMRA with Fast Dave Flanders at the wheel.

Joe commented that the goal was to get tossed from open comp for being too fast :pepper:

[Steve-0]

Jebus that's fast! Looks badass too:thmbsup:

[92306gt]

And who said pintos arent cool?

[1Badbird]

And who said pintos arent cool?


That one sure is!

[map351]

"Joe Laramee went 8.75 at 154 MPH last night at Gateway in St Louis. Not bad for a blow through carb setup that everybody knows wont work."

[yeahloh95]

yeah when is he going to learn and put efi on that thing

[billyNOTnice]

man that car is nice

[ruger77]

:bowing:

[map351]

JD laramee's Pinto ran a 8.22 @ 160.59 over the weekend..

YouTube - Joe Laramee's turbo Pinto at Rockingham 4/3/11

[phillysrt4]

wow.... nuts!

[map351]

From Joe..

"I still have three or four pretty good size problems, that are self induced, so now the engines coming out.

Problem#1 One i forgot to install the oil resrictor, so when i made that pass the majority of the 7 quarts of oil were, along with problem#2 all over the engine bay..And yes, i thought to myself, HEY STUPID, DID YOU FORGET TO INSTALL SOMETHING?

Problem#2 This is a really dumb thing to do but the pistons are NOT gas ported, at all, but they will be. As im sure the rings couldnt do there job properly without some help..

You may ask Timmy how many rpms the computer said i turned that pass, for a 3.6 stroked crank...- Scary, even for me.

Here's the boost deal. This car hasnt ever been on the dyno. Even with the new 4276 turbo and intake tubing we just installed. I do all my tuning at the track, or just on the brake at home and when i get time and feel up to working on it. Up until now if i wanted to know how much boost i was at, id just put it up on the brake and check it that away on the secondary guage... Its kinda questionable to look over at the guages at 150 mph or so, well atleast for me.. When i ran this car last year i didnt have my sensor for dataloging the boost or intake temp.

When in the past when it said 28 psi which was kinda embarrassing to only go 8.75. i really didnt say much about it other then its making less power then my street car.... What was happening i found out yesterday is.. I had the boost set at 32psi total for the pass. I left the line at 13-14 psi, 1.4 sec. later it spiked to 32 psi then backed up to 23 psi 2.7 sec. later... I have problems!, although it explained why in the past id put it on the brake at 28 psi but it would actually run like a turd, obviously only going down the track at 19-20 psi after the spike id guess. I couldnt datalog at that point so i just thought it was staying up, but it wasnt, and i didnt know it til i got my sensors all in..

Bo and i talked about this a couple a weeks ago and never would have known this til yesterday.

Also i wondered why it ran so good to the 1/8 but really wasnt that great of a 1/4. This will get fun when we get it up to 40 psi and keep it there for a complete pass."

Here's the time slip:

R/T .063
60ft. 1.208
330ft 3.456
1/8 5.268
mph 137.60
1000ft 6.851
1/4 8.22
mph 160.59
According to National Dragster, it about right et wise but the speed is probably 7 - 12 mph slow from were id like to have seen it. It just didnt run on the second half of the track ( the boost issue, im sure),Joe

[phillysrt4]

Thanks for relaying the information. Post mortems from shakedown runs are always a good read. You always learn something new.

[map351]

Laramee's Rockingham run, 8.22 @ 160 video by mchris67 - Photobucket

[Black Magic]

Great looking car !!!! Great engine bay. Dave

[Martin0660]

I still have not been able to get any of the videos to play :( Talked to Curtis last night, seems like there was more wrong with that pass than was right.

[Martin0660]

FWIW, this car was mostly totaled yesterday ... I nearly cried for Joe when I got the call ...

Here is part of what he posted on TurboFord ...

First short pass of the day i figured id go out 300 feet or so and then get out og it to see how it felt... When i left the line the boost was only at about 6 pounds and gradually going up to 15 befor spiking real quick to 32...

At this point the car spun the tires at about150 feet out going wildly back and forth, trying to save the car from hitting the wall.

At about 80-100mph the car when heads on into the wall, and BARREL ROLLED down the track, I think 3 times. I am very sore, lower middle and top of my back and neck. I literally cried half the way home from the track. I will in the near future decide what i will do next. I had a goal that i had not reached so i hate to sell out and give up but my wife may not give me an option.,Joe

[Martin0660]

At about 80-100mph the car when heads on into the wall, and BARREL ROLLED down the track, I think 3 times.

If ANYTHING good can come from this, I hope everyone that everyone reads that line really close, and then looks at some of their 1/8th mile MPH and then takes a good look at their safety equipment ... This was a "best of everything" chassis car and he was mostly able to walk away ...

[map351]

I still have not been able to get any of the videos to play :( Talked to Curtis last night, seems like there was more wrong with that pass than was right.

Video?

[biminiLX]

Wow, that sucks :(
Did he have a boost controller?
Just wondering how he said boost spiked from 15 to 32psi :(.
-J

[Martin0660]

He got the car unloaded today and the Chassis guy has had a look at it ... The good news is the Chassis is still where it is supposed to be ...

As it was ....

http://i11.photobucket.com/albums/a198/CurtisHensley/Laramee%20Pinto/Picture590.jpg

As it is ...

http://i11.photobucket.com/albums/a198/CurtisHensley/Laramee%20Pinto/Larameewreck002.jpg

http://i11.photobucket.com/albums/a198/CurtisHensley/Laramee%20Pinto/Larameewreck001.jpg

[Martin0660]

Did he have a boost controller?

well, that another issue ... It will need resolved.

[PaxtonShelby]

Wow - that's too bad, but at least he is ok. Talk about an awesome machine.

[phillysrt4]

x2, but like you said parts can be replaced.

[Martin0660]

There have been further updates on this. The basic chassis seems okay (at least in appearance), he is going to get it on the surface plate soon and is going to rebuild it.