5 lug swap parts list

[J-rod]

i searched for a parts list, couldnt find one...thought it be good if we can come up with a GOOD complete 5 lug swap parts list.


so those you who know whats needed...please help me compile a list.

[INSANELY CRAZY]

check out this link... everything u need to know

http://www.stangnet.com/tech/lug.html

[Ares]

I also saw posted somewhere to use late 80's Ranger front disks on early fox bodies.

[N8Miller]

I am going to have axles and rotors available soon if you need them.

[Stangzrule]

I got a pair of 94-98 front calipers if anybody needs them.

[INSANELY CRAZY]

there you go jared.... start buyin.. dont let it get away. it's not fun walking threw a junk yard looking for these parts...

[Silverhatch]

there you go jared.... start buyin.. dont let it get away. it's not fun walking threw a junk yard looking for these parts...
Ironically, I actually enjoy it!:jump:

[wick]

Ironically, I actually enjoy it!:jump:


Me too. Just have not had the time to do so.

Jarad, two left ranger axles, two ranger drums. Front, depending on wheel selection you can get away with lincoln mark VII front rotors. They just bolt right on. OR you will need to do what I did to mine. You saw it. '94-'95 front spindles from any mustang. V-6 or V-8, they are all the same parts. I opted for the PBR calipers. Did my whole upgrade for around 100.00. Got the expensive parts from a friend who needed money real bad.

[J-rod]

Me too. Just have not had the time to do so.

Jarad, two left ranger axles, two ranger drums. Front, depending on wheel selection you can get away with lincoln mark VII front rotors. They just bolt right on. OR you will need to do what I did to mine. You saw it. '94-'95 front spindles from any mustang. V-6 or V-8, they are all the same parts. I opted for the PBR calipers. Did my whole upgrade for around 100.00. Got the expensive parts from a friend who needed money real bad.


what if i wanted disk all around? and did you really mean 2 LEFT ranger axels?

[INSANELY CRAZY]

what if i wanted disk all around? and did you really mean 2 LEFT ranger axels?


2 driver's side axles out of 88 4wd ranger they will be the same length in ur rearend... disc is a nice but pricey upgrade

[J-rod]

i would mainly do it for the brake upgrade. :dunno:

what brakes to use with the mark VII rotors?

[Viper_ed]

Remember that "Good Bathroom Reading Material" link I sent you. Why don't you actually sit down and read it! :yes:

[wick]

2 driver's side axles out of 88 4wd ranger they will be the same length in ur rearend... disc is a nice but pricey upgrade


It can be either 4x4 or 2x4. Does not matter. 7.5 or 8.8 they are the same too. Many years not just the 88. There are thousands out there and the axles are usually only about 25 or 30 dollars.

[wick]

i would mainly do it for the brake upgrade. :dunno:

what brakes to use with the mark VII rotors?

Stock. Its a direct bolt on with zero mods. If you want the upgrade though then do what I did or read ed's BRM.

[87notch]

Ironically, I actually enjoy it!:jump:

Same here.I picked up a complete set of prostars with drag radials for $200.00.

[J-rod]

well i actually tried printing my BRM at work today but i fugged the printer..so i stopped...ill try again tomorrow.

i have heard the SVO caliper swap isnt worth it.

i could do the cheap 5 lug swap for now and remain stock brakes....that would help my wheel choices...then do the upgrade later. id settle for PBR calipers...i dont need the 13" like you rob. :)

eric - id love to go to a u pull it but closest decent one around is jordans at dillner pa.

[J-rod]

Remember that "Good Bathroom Reading Material" link I sent you. Why don't you actually sit down and read it! :yes:

i might print a few pages now...i feel a poop coming on :rofl:

[04yellowcobra]

I have disc all around on my 87 ... Everything is out of a 95 V-6.

Later

[J-rod]

I have disc all around on my 87 ... Everything is out of a 95 V-6.

Later


that was my plan for buying that 95 but i was denied.


you using 94-98 axels? what wheels?

[04yellowcobra]

95 axles, 99+ V-6 wheels

Heres Trashy!!!

http://98yellowstang.com/IMG_0312.jpg

[Chris00GT]

Here are the link's I used to swap over to 03 Mach 1 disk brakes front and rear. I used 95 spindles, 95 cobra brake booster and mastercylinder, ford racing proportion plug, braided steel brake lines, stock 98 mustang gt axles, and a summit adjustable rear proportion valve. The brake pedal is rock hard and the car stops soo fast with next to no pedal effort!!

http://www.stangnet.com/tech/lug.html

http://mjbobbitt.home.comcast.net/index.html