PDA

View Full Version : Power Pulls



laz2447
05-10-2010, 03:04 PM
Mike,

Do have a set schedule for customers coming in for power pulls?

I am not looking for any tuning at this point, just want some baseline numbers and come up and shoot the breeze. I picked up an '06 GT last month. While I am sure everyone will be able to get the rwhp and rwtq within a few +/- I still would like to go through the process. :laughing:

After I have some numbers to look at, I would then like to see about tuning and where I would be with certain mods and such.

Thanks for your time...

Dave

Wolfpack Speed
05-10-2010, 05:21 PM
Mike,

Do have a set schedule for customers coming in for power pulls?

I am not looking for any tuning at this point, just want some baseline numbers and come up and shoot the breeze. I picked up an '06 GT last month. While I am sure everyone will be able to get the rwhp and rwtq within a few +/- I still would like to go through the process. :laughing:

After I have some numbers to look at, I would then like to see about tuning and where I would be with certain mods and such.

Thanks for your time...

Dave

Dave,

Good to hear from you and congrats on the new ride! Yes, everything is by appointment only. We tune on the dyno every week so we will need to schedule you in. Just give me a ring when you are getting close and we can go from there.

Thanks!

Mike

laz2447
07-14-2010, 10:26 AM
Mike,

Thanks for the quick response and great info on my questions.

I'll be touch once I am ready to get the work we discussed done. :)

Dave

Wolfpack Speed
07-14-2010, 10:56 AM
Mike,

Thanks for the quick response and great info on my questions.

I'll be touch once I am ready to get the work we discussed done. :)

Dave

No problem Dave! I look forward to seeing the new ride:bouncy:

sutyak
07-14-2010, 12:05 PM
Mike what is your dyno time cost?
Any group dynos scheduled?

Wolfpack Speed
07-14-2010, 04:19 PM
Mike what is your dyno time cost?
Any group dynos scheduled?Just depend on what you want to do, give me a ring at the shop if you have any questions.

sutyak
07-14-2010, 09:11 PM
Just depend on what you want to do, give me a ring at the shop if you have any questions.
I do my own tuning using the SCT PRP, and for the most part it should be dialed in.
Basically I'd just like to know what it's putting down.
It would probably be this Fall.

Wolfpack Speed
07-15-2010, 07:16 AM
I do my own tuning using the SCT PRP, and for the most part it should be dialed in.
Basically I'd just like to know what it's putting down.
It would probably be this Fall.Sounds like all you need is 2 power pulls with a/f...$85. Let me know if/when you want to make an appointment.

Mike