Martin0660
07-10-2010, 10:40 PM
I have some tuning realted items for sale. All of these was removed working from my Capri for an EMS upgrade.
Base Model TwEECer (not RT). This is a multi position chip for you EEC-IV car. Works on most models EEC-IV, but check it out on the site to be sure.
Basic info here:
http://www.tweecer.com/index.htm
Product info ...
http://www.tweecer.com/tweecer.htm
Price and features ...
http://www.tweecer.com/products.htm
Downloadable software ...
http://www.tweecer.com/downloads.htm
You can use the free CalEdit software with this (as it's supplied by the OEM). A better option is Binary Editor, but that is a different vendor (and more cost.
TwEECer is $380.00 new, I'm asking $250.00 OBO. In good working condition, but I duct tape it to my EEC so there very well be tape residue on it.
Innovate SSI-4
The Innovate SSI-4 is a 4 channel data logging box. You can connect up to 4 total 0-5 analog inputs into it and use it for data logging using your laptop and their "log works software. If you have one of their widebands, this will go into the serial chain and gather even more data. I used mine to log RPM (tach signal), AFR (from wideband), MAF volts (tuning) and MAP (manifold pressure using GM 3 bar sensor)
Product info ...
http://www.innovatemotorsports.com/products/ssi_4.php
Logworks software ...
http://www.innovatemotorsports.com/support.php
These sell at $130 (sometimes as low as $110.00). Asking $75.00, OBO. This includes the SSI-4, and serial cable. If you buy new, the logworks program comes on a CD, but mine is LW2, and they are on 3 ... free to download V 3.0 anyway.
PMAS HPX Slot type MAF meter.
This is the "'05 up type" slot mass air sensor. The nice thing about slot sensors is that they allow you to "up" the tube size to prevent pegging. They are also very friendly for blow though set-ups.
VMP tuning site (who I bought from) ...
http://www.vmptuning.com/store/index.php?p=product&id=193&parent=30
Sensor sells for $225.00 new, I'm asking $150, obo.
In addition, I have a pile of the wiring harness needed to adapr this (6 wire plug), relay, etc depending on what you are doing. If any of this helps you we can talk for a few $$'s
Housing
Also, I have a 9" long piece of aluminum 3" tube, bead rolled both ends, with the adaptor for the slot sensor tig welded in.
Flange on VMP Tuning site ...
http://www.vmptuning.com/store/index.php?p=product&id=32&parent=31
The flange itself sells for $45.00. I'm asking $40.00, OBO for the whole deal welded and ready to use.
"55"# Injectors. (likely not a lot of interest in these here)
These are actually 57#, Low Z injectors. Siemens DEKA 1 type. Most guys enter these int otheir tuning as 55's, and they mostly are called 55's by most guys, although they are really sold as 57's. Again, these are low Z, and I have 4.
Racetronics site ...
http://www.racetronix.com/3102FM.html
These sell for $230.00 for a match set of 4. I'm asking $140.00, OBO
I can get detailed pictures of anything you might be interested in, more information, or whatever you might need. Obvioulsy, I would be willing to tal kabout package deals or whatever, and if a 2.3 guy wanted the whole ball of wax, my tunes are still in the TwEECer (11 second ride ;) )
As I said, all of this was removed from my running car to make way for the EMS upgrade. As with anything electronic, both the buyer adn seller need to be cautious as there are lots of ways to mess this stuff up, but I know it all worked when pulled.
Picture of the lot of stuff for reference (LA3 NOT for sale) ...
http://inlinethumb05.webshots.com/8580/2523931560066453426S600x600Q85.jpg (http://rides.webshots.com/photo/2523931560066453426iCqNfD)
Base Model TwEECer (not RT). This is a multi position chip for you EEC-IV car. Works on most models EEC-IV, but check it out on the site to be sure.
Basic info here:
http://www.tweecer.com/index.htm
Product info ...
http://www.tweecer.com/tweecer.htm
Price and features ...
http://www.tweecer.com/products.htm
Downloadable software ...
http://www.tweecer.com/downloads.htm
You can use the free CalEdit software with this (as it's supplied by the OEM). A better option is Binary Editor, but that is a different vendor (and more cost.
TwEECer is $380.00 new, I'm asking $250.00 OBO. In good working condition, but I duct tape it to my EEC so there very well be tape residue on it.
Innovate SSI-4
The Innovate SSI-4 is a 4 channel data logging box. You can connect up to 4 total 0-5 analog inputs into it and use it for data logging using your laptop and their "log works software. If you have one of their widebands, this will go into the serial chain and gather even more data. I used mine to log RPM (tach signal), AFR (from wideband), MAF volts (tuning) and MAP (manifold pressure using GM 3 bar sensor)
Product info ...
http://www.innovatemotorsports.com/products/ssi_4.php
Logworks software ...
http://www.innovatemotorsports.com/support.php
These sell at $130 (sometimes as low as $110.00). Asking $75.00, OBO. This includes the SSI-4, and serial cable. If you buy new, the logworks program comes on a CD, but mine is LW2, and they are on 3 ... free to download V 3.0 anyway.
PMAS HPX Slot type MAF meter.
This is the "'05 up type" slot mass air sensor. The nice thing about slot sensors is that they allow you to "up" the tube size to prevent pegging. They are also very friendly for blow though set-ups.
VMP tuning site (who I bought from) ...
http://www.vmptuning.com/store/index.php?p=product&id=193&parent=30
Sensor sells for $225.00 new, I'm asking $150, obo.
In addition, I have a pile of the wiring harness needed to adapr this (6 wire plug), relay, etc depending on what you are doing. If any of this helps you we can talk for a few $$'s
Housing
Also, I have a 9" long piece of aluminum 3" tube, bead rolled both ends, with the adaptor for the slot sensor tig welded in.
Flange on VMP Tuning site ...
http://www.vmptuning.com/store/index.php?p=product&id=32&parent=31
The flange itself sells for $45.00. I'm asking $40.00, OBO for the whole deal welded and ready to use.
"55"# Injectors. (likely not a lot of interest in these here)
These are actually 57#, Low Z injectors. Siemens DEKA 1 type. Most guys enter these int otheir tuning as 55's, and they mostly are called 55's by most guys, although they are really sold as 57's. Again, these are low Z, and I have 4.
Racetronics site ...
http://www.racetronix.com/3102FM.html
These sell for $230.00 for a match set of 4. I'm asking $140.00, OBO
I can get detailed pictures of anything you might be interested in, more information, or whatever you might need. Obvioulsy, I would be willing to tal kabout package deals or whatever, and if a 2.3 guy wanted the whole ball of wax, my tunes are still in the TwEECer (11 second ride ;) )
As I said, all of this was removed from my running car to make way for the EMS upgrade. As with anything electronic, both the buyer adn seller need to be cautious as there are lots of ways to mess this stuff up, but I know it all worked when pulled.
Picture of the lot of stuff for reference (LA3 NOT for sale) ...
http://inlinethumb05.webshots.com/8580/2523931560066453426S600x600Q85.jpg (http://rides.webshots.com/photo/2523931560066453426iCqNfD)