PDA

View Full Version : WTB:5 lug 15" drag wheels


1badnotch
09-03-2010, 07:23 PM
I need a pair of 5 on 4.5" bolt pattern wheels to mount my ET streets on for the strip. Prefer a pair of 15"x8" prostars with 5.5" backspacing,but let me know what you have. I need something ASAP. Thanks.
Mark 703 801-8615 cell
wick
09-03-2010, 09:44 PM
You sure you dont need 5.5 BS?
wick
09-03-2010, 09:45 PM
Neverming Mark. I read it wrong. HAHA I need the same wheels.
1badnotch
09-04-2010, 09:05 AM
That's cool,Rob. I actually have a pair of 15x8 with 4.5" backspacing. They look good,but push the tires out too far and they rub a little. So I guess 5.5" backspacing will be good.
Mark
90TitaniumStang
09-05-2010, 12:52 AM
i have a set of drag lites 15x10 i think they have a 5.5 or 6 in bs ill check tomorrow whn i head out to the garage
NateSVT
09-05-2010, 09:08 AM
i have a set of drag lites 15x10 i think they have a 5.5 or 6 in bs ill check tomorrow whn i head out to the garage

If Mark or Rob don't want the 15x10s then I might be interested depending on the backspacing and price.:thumbsup:
1badnotch
09-05-2010, 09:49 AM
Those might work. Let me know what the backspacing is and a price. Thanks.
Mark
biminiLX
09-05-2010, 03:33 PM
10" will only work with a 6.5" BS on your Fox, Nate could use less BS and be fine on the Cobra, rear Cobra brakes might be close near banjo bolt/parking brake bracket though.
-J
went9s
09-05-2010, 11:48 PM
I am going to be selling my Weld Pro Stars. but only as a set of 4.
3-1/2w with tires front
10w--6.5 bs has 325-50-15 bfg drag radials (can take off)has rim screws.
90TitaniumStang
09-06-2010, 01:21 AM
mine have a 6.5 back spacing first 225 takes em home
they have the holes for rim screws as well
90TitaniumStang
09-06-2010, 01:22 AM
10" will only work with a 6.5" BS on your Fox, Nate could use less BS and be fine on the Cobra, rear Cobra brakes might be close near banjo bolt/parking brake bracket though.
-J
i have 1/4" wheel spacers he could use if he wanted
biminiLX
09-06-2010, 09:49 AM
i have 1/4" wheel spacers he could use if he wanted
10" wheel with 6.5" is fine on a Fox but will require outer fenders rolled and some mild hammer work on the inside.
The 1/4" spacer can actually help but makes it closer to outer lip, so you can't be too much lowered or not have fender lips rolled.
10" with 6.5" BS and a 1/4" spacer for trial fitting is the way to go. :goodidea:
-J