PDA

View Full Version : Anderson N61


Balaska347
11-05-2010, 07:41 PM
Im selling my N61 cam from Anderson ford motor sport. 302-331 c.i.d. Best performer for 302 c.i.d. at 6200/6500 shift point. Great with TFS or Edelbrock heads 24 or 30lb injectors. Recommend 4.10 or 4.30 gears. Good drivability down to 2200 rpm, lumpy idle, rpm range 2500-6500, needs 2800 to 3100 converter.

This cam in my car has gone 10.90's NA. Im asking $190.
ruger77
11-06-2010, 01:52 PM
Mike is that for an auto only?
349Stroker
11-06-2010, 05:10 PM
work with a 5 speed just fine
Balaska347
11-07-2010, 12:57 AM
He's correct, if anything its probably more for a manual but makes no difference.
ruger77
11-10-2010, 08:37 PM
Whats the hp/tq difference between this and a Trick Flow stage 1 Mike? Have any idea?
349Stroker
11-11-2010, 07:46 AM
Whats the hp/tq difference between this and a Trick Flow stage 1 Mike? Have any idea?



too far of a wide open question there...All depends on what motor you have
Balaska347
11-11-2010, 05:11 PM
Whats the hp/tq difference between this and a Trick Flow stage 1 Mike? Have any idea?

Definitely to general of a question that I could never answer. What I can tell you is that with your combo it would definitely be better with alot more room to grow.
went9s
11-13-2010, 10:22 PM
pulled these spec's off click click racing.
N-61......228/236 .544/.568 w/1.6 rocker 110
ruger77
11-15-2010, 09:25 PM
too far of a wide open question there...All depends on what motor you haveThats an awesome bike! Anything done to the motor?
yeahloh95
02-16-2011, 07:52 AM
do you still have this cam ?
Balaska347
02-16-2011, 03:05 PM
sold...