Hello , New guy here

[RogerStout]

Hello, My name is Roger, like that was not obvious.. I just picked up a 94 Mustang Gt today, it needs some TLC but for the most part is a solid ride. I was told I needed to get my ass to this site asap.. so here I am

Here is my car.. photo was taken right before I handed over the cash..

http://i858.photobucket.com/albums/ab141/rdcstout/d078c65c.jpg

Mod List

Cobra Intake
BBK 70MM TB
Scorpion 1.72 Roller Rockers
MAC CAI
MAC Shorty headers
Under Drive Pulleys
UPR X Pipe (2.5")
Mac Mufflers, dumped at rear axle.
RAM HDX Clutch
MGW Billet Shifter
Fiore Billet Aluminum Clutch Quadrant
Fiore Firewall Adjustor.
Maximum Motorsports Full Length Weld-ON Subframe Connectors
Maximum Motorsports Extreme Duty Lower Control Arms with Spherical Bushings in Both Ends
Maximum Motorsports Panhard Bar w/ Polished Arm
Maximum Motorsports Caster Camber Plates (forgot to get them)
Eibach Pro Kit Springs
Tokiko Blue Shocks
2000 Cobra R rims 18x9.5 w/ Sumitomo HTRZ III tires (285/35/18 on all 4 corners)
2000 Cobra R Brembo 4 Piston Calipers w/ 13" Rotors and Goodridge stainless braided lines up front
Ford Racing aluminum Driveshaft
Corbeau LG1 Legacy Racing Seats (Black)
Autometer/Ford Racing Temperature & Mechanical Oil Pressure Gauges

[Killercanary]

Welcome to the site! That's a nice looking 94. I like the export fender flares and 2000 cobra r wheels. Do you have any plans for it?

[RogerStout]

Yes I have tons of plans, lot of the reason why I am here. Its needs some interior parts a good cleaning and tune. I am up in the air about the dumps.. might dynomat the car and see if that helps. The rims need some TLC cleaned up and paint job (on this rims)..

[Steve-0]

Welcome to the site! Nice lookin car:highfive:

[TYR FRYR]

Welcome and congrats on your new car!

[RogerStout]

Thanks Guys

[John4cam]

welcome

[gmkillr]

Welcome!

Its great to have another 94-95 here!

Your car looks like it has alot of potential!

Any more pics?

[yeahloh95]

welcome

[INSANELY CRAZY]

welcome, nice lookin ride

[RogerStout]

Here are some older pics the previous owner took.

http://i858.photobucket.com/albums/ab141/rdcstout/0282.jpg

http://i858.photobucket.com/albums/ab141/rdcstout/0272.jpg

http://i858.photobucket.com/albums/ab141/rdcstout/024-1.jpg

http://i858.photobucket.com/albums/ab141/rdcstout/023-1.jpg

Its needs some cosmetic attention, center console is loose and passenger side door lock is not working. little things need addressed but for $3500.00 I a hell of a deal.

[Mater]

welcome :Beer:

[scott5]

Welcome

[RogerStout]

Thanks guys..

[shawnsvtcobra]

Welcome.

[somethingclever]

welcome Roger.

I would do a compression test before doing a tune (if you were going to pay someone to tune it for you). I seem to recall that car posted on corral or svtp a few months ago with a running issue...it was purchased off there and then went to the guy from wvstreets. I saw the PO from wvstreets attempted to fix it with an injector repair but the issue is still there and now you have it.

(I spend too much time in classified sections) :)

Good luck and feel free to use the tech section to post any questions that arise....

[RogerStout]

Sounds like good advice can you link me to the sale thread of the original owner? The one from NY?

[bluenotch]

nice car and welcome

[no1sirbutler]

OH GREAT your here?!?!?!?!....j/k buddy

Great group of guys here, I think youll like it here.

[AdamantiumSilvr]

What up and welcome?!

[Wolfpack Speed]

Welcome!!!

[Slow01GT]

Welcome.

[ModularMike]

Welcome man

[GEARHEAD94]

Welcome to SCS. That is a good looking 94.

[PaxtonShelby]

Welcome to SCS! Car looks nice! I think someone on this board refinished rims just like yours. Might be RioRed??? Anyway, his turned out really nice - I bet he could tell you the exact steps he followed.

I also recommend getting some FinishFirst polish for the paint. 94Cobra on this board has a black...uh...94 Cobra....and has used this product on his car with great success. Since then I have also used it on all my cars and it is FANTASTIC!

http://www.finishfirstautopolish.com/FINISHFIRSTPOLISH.htm

Good luck and welcome again!! :D

[RogerStout]

Thanks guys..

No1sir, I got called a mustang asshole for the first time tonight.. That didn't take long. LOL

[RogerStout]

Welcome to SCS! Car looks nice! I think someone on this board refinished rims just like yours. Might be RioRed??? Anyway, his turned out really nice - I bet he could tell you the exact steps he followed.

I also recommend getting some FinishFirst polish for the paint. 94Cobra on this board has a black...uh...94 Cobra....and has used this product on his car with great success. Since then I have also used it on all my cars and it is FANTASTIC!

http://www.finishfirstautopolish.com/FINISHFIRSTPOLISH.htm

Good luck and welcome again!! :D

Hey thanks for the info!

[no1sirbutler]

Thanks guys..

No1sir, I got called a mustang asshole for the first time tonight.. That didn't take long. LOL

Imagine that lol....youll get used to it.

[412mustangz]

Welcome to SCS, nice lookin ride

[speedracer]

Welcome Rodger!

[RogerStout]

Thanks guys.. Hey Greg thanks for the welcome.

[no1fordgirl]

Welcome to SCS!! =) Glad to have ya here with us!

Congratulations!! Looks good

[Stroked03Cobra]

Welcome and Congrats on the buy!

[RogerStout]

Thanks, love the site so far..

[cobra tom]

Tommy likey!! Welcome to the site.

[X-CELL RACING]

Nice ride roger welcome to scs.. oh yea TOM GET YO ASS BACK TO WORK lmao..hehe

[95V6]

Welcome, I ready really want your wheels!

[Martin0660]

Welcome!

[RogerStout]

Thanks guys, Yeah I am loving the wheels too..

[burnoutman]

Welcome to SCS i think you got a good deal on the car there are a lot of mods.all ready done. If a motor problem comes up i don't think it will be a big deal there are good used 5.0 out there for sale.

[RogerStout]

Thanks!