Eibach Prokit Sportline ?

[RogerStout]

I have prokit springs all around on my car, MMS Lower control arms and MMS panhard bar.. My gaps dont match up at all.. I was thinking of installing sportline springs in the rear to level the car anyone tried this?

Cant really see the rears here but note the front..

http://i858.photobucket.com/albums/ab141/rdcstout/Mustang/37b87161.jpg

Here is a shot of the rear..

http://i858.photobucket.com/albums/ab141/rdcstout/Mustang/44911c23.jpg

[PaceFever79]

A little rake looks mean with that body.

Love the horizontal tail lights!

[speedracer]

A little rake looks mean with that body.

Love the horizontal tail lights!
Roger wants to make it harder to get in and out of his driveway :biglaugh:

[RogerStout]

it does not drag in the driveway LOL I dont have low ass mufflers like them other boys..

[Troll]

Do you have the rubber isolators in or out, front or back?

[RogerStout]

I am getting a clunk(sort of) when taking off from reverse and someone told me that the isolators are probably gone in the front.. I have not looked, but I do recall someone telling me removing them will drop it a bit more.

[Troll]

If they're in and you remove them, it'll drop it about 1/4".

I had an '01 with ford c-springs which are very similar to the pro-kit. I took all the isolators out front and back and it was pretty even. the back was still about 1/4" higher than the front.

[RogerStout]

worth checking into thanks

[speedracer]

You could always raise the front a little ricer boy :pinkthumb:

[RogerStout]

F that!

http://vinylappeal.com/img/p/15-56-large.jpg

[speedracer]

If you lower the rear it's going to transfer a little weight off of the front and raise it a little.

[mineralrob]

could always cut the rear springs a lil. I know alot of guys that have done that with good success. Just a idea and wont cost anything. Either way i like the way your car looks.:woot1:

[95V6]

^ I agree, cut alittle bit of coil off untill you get it right where you want it.