PDA

View Full Version : EFI Intake


Viper_ed
09-01-2006, 08:27 AM
Anyone ever use this style of intake on an Fuel Injected setup?

http://cgi.ebay.com/ebaymotors/FORD-SBF-CANFIELD-ALUMINUM-INTAKE-EFI-RACING-NR-0-99_W0QQitemZ300021672409QQihZ020QQcategoryZ36474QQ rdZ1QQcmdZViewItem
Mater
09-01-2006, 09:00 AM
no sir!
Pure Stock
09-01-2006, 03:31 PM
Anyone ever use this style of intake on an Fuel Injected setup?

http://cgi.ebay.com/ebaymotors/FORD-SBF-CANFIELD-ALUMINUM-INTAKE-EFI-RACING-NR-0-99_W0QQitemZ300021672409QQihZ020QQcategoryZ36474QQ rdZ1QQcmdZViewItem

You planning on turnin' some serious R's...:rolleyes:
Viper_ed
09-01-2006, 08:17 PM
You planning on turnin' some serious R's...:rolleyes:

LOTS of Boost!
Shaggy
09-01-2006, 11:53 PM
sweet, more crap to get stuck under the intake :yes:


Id try it for $40 hahahaha
Rodeheaver's
09-09-2006, 08:41 AM
hey Ed, that is the way to fly... But you better send it to kaufmans for tuning, Hahaha...
Killercanary
09-09-2006, 10:37 AM
Ed, I did a little research and found out that the intake you linked to is one of only about 5 ever made. Canfield does in fact make these intakes, and they offer them in a "large" and "small" runner style. I was told how large the port was on the "large" port one was, but I can't remember for sure right now... 2.X" sticks in my mind though. Also, that intake would require extensive welding and narrowing of the port if it was to be used on anyhing short of say an AFR205. In other words this thing is as close to a race only part as you can get. The "small" port version is better suited to most combos and there are more of them out there.