gmkillr
01-05-2012, 06:23 PM
RE-Audio 1500.1 Amp
DTS Series Monoblock Class D Car Amplifier
RMS Power Rating (14.4V)):
4 ohms: 410 watts x 1 chan.
2 ohms: 700 watts x 1 chan.
1 ohm: 1000 watts x 1 chan.
Dynamic power output: 2000 watts x 1 chan.
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +12 dB bass boost at 45 Hz)
Bridgeable with multi link technology (MLT)
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
2-Way System Protection circuitry (thermal and short circuit)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty brushed aluminum alloy convection fan cooled heatsink for efficient heat dissipation
Nickel-plated RCA level inputs
Nickel-plated 12AWG screw terminals
Input Impedance: 20 K-Ohm
Input sensitivity:
Low level: 100mV-6V
Variable low-pass filter (40-180 Hz, 24 dB/octave)
Subsonic filter (17-50 Hz, 24 dB/octave)
Bass frequency (30-80 Hz)
Effective damping factor: 150 @ 4 ohms
Frequency response: 17-180 Hz
Dimensions: 14-9/16"L x 8-11/16"W x 2"H
Price for the Amp is: $150
JL Audio 13" Dual 4 ohm W6v2 Series Car Subwoofer
13" Dual 4 Ohm W6v2 Series Subwoofer
Power Handling:
Peak: 1500 watts
RMS: 750 watts
Recommended Power Range: 200-750
Impedance: Dual 4 ohm
W-Cone: Unibody design, extremely stiff and light
Woofer surround type
Floating-Cone attach method: ensures proper surround geometry for better excursion and voice coil alignment
Plateau-reinforced spider attachment: relieves stress from the spider at high excursions
Pole and cone venting: removes hot air during high power operation to improve sound quality and reliability
Forced-air-cooled aluminum alloy frame: enhances power handling and sound quality
Highly optimized motor systems: reduce distortion, and improve transient behavior
Large, progressive-roll spiders: optimized to controls long excursion without limiting it
Customizable trim ring can be painted to match installation colors
Dual 4 Ohm 2.75" diameter, 4-layer voice coils
Kapton voice coil former
Custom built sealed box built to specific JL Audio specs for this sub.
Price for sub & custom built 3/4" mdf box is $250...............SOLD
DTS Series Monoblock Class D Car Amplifier
RMS Power Rating (14.4V)):
4 ohms: 410 watts x 1 chan.
2 ohms: 700 watts x 1 chan.
1 ohm: 1000 watts x 1 chan.
Dynamic power output: 2000 watts x 1 chan.
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +12 dB bass boost at 45 Hz)
Bridgeable with multi link technology (MLT)
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
2-Way System Protection circuitry (thermal and short circuit)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty brushed aluminum alloy convection fan cooled heatsink for efficient heat dissipation
Nickel-plated RCA level inputs
Nickel-plated 12AWG screw terminals
Input Impedance: 20 K-Ohm
Input sensitivity:
Low level: 100mV-6V
Variable low-pass filter (40-180 Hz, 24 dB/octave)
Subsonic filter (17-50 Hz, 24 dB/octave)
Bass frequency (30-80 Hz)
Effective damping factor: 150 @ 4 ohms
Frequency response: 17-180 Hz
Dimensions: 14-9/16"L x 8-11/16"W x 2"H
Price for the Amp is: $150
JL Audio 13" Dual 4 ohm W6v2 Series Car Subwoofer
13" Dual 4 Ohm W6v2 Series Subwoofer
Power Handling:
Peak: 1500 watts
RMS: 750 watts
Recommended Power Range: 200-750
Impedance: Dual 4 ohm
W-Cone: Unibody design, extremely stiff and light
Woofer surround type
Floating-Cone attach method: ensures proper surround geometry for better excursion and voice coil alignment
Plateau-reinforced spider attachment: relieves stress from the spider at high excursions
Pole and cone venting: removes hot air during high power operation to improve sound quality and reliability
Forced-air-cooled aluminum alloy frame: enhances power handling and sound quality
Highly optimized motor systems: reduce distortion, and improve transient behavior
Large, progressive-roll spiders: optimized to controls long excursion without limiting it
Customizable trim ring can be painted to match installation colors
Dual 4 Ohm 2.75" diameter, 4-layer voice coils
Kapton voice coil former
Custom built sealed box built to specific JL Audio specs for this sub.
Price for sub & custom built 3/4" mdf box is $250...............SOLD