Project Cocaine

[George C]

Some of you have followed my truck over the yrs. From its first turbo setup in 08 to its twins in 2010 and now for 2014 the truck is going back to an auto. I had enough of the issues that are related to the manual and power setup for me the change and go back to an auto. The last issue was my firewall split from the clutch master, with all the pressure always applied from the pedal.

so for this revision of the truck i got rid of alot of un needed weight. Weight form the skirts, weight from the front bumper, system and etc



i then wanted a change in interior, so went with SEM landau black interior dye and had my panels dyed black. Also went ahead and had my headliner redone in black suede

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1620642_697031213680375_2082083094_n_zpscd20a984.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1620642_697031213680375_2082083094_n_zpscd20a984.j pg.html)

at this point i felt it was time to stiffen up the chassis some by doing a roll bar. I went ahead and did a 8 point chromo
with with 3/16 polycarbonate for the rear glass
wanted removable door bars as this is a street truck and not a full race truck. the wife wanted the door bars to be removable for when she drives the truck

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1903987_694254180624745_1352442790_n_zpsa82333c4.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1903987_694254180624745_1352442790_n_zpsa82333c4.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1902854_694254137291416_1253344595_n_zpsf364b074.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1902854_694254137291416_1253344595_n_zpsf364b074.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1888587_694273077289522_1919833440_n_zpsaf21790d.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1888587_694273077289522_1919833440_n_zpsaf21790d.j pg.html)

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1656428_695953770454786_667705932_n_zpsb517f8b2.jp g (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1656428_695953770454786_667705932_n_zpsb517f8b2.jp g.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1743634_698722470177916_1324795412_n_zps29ab647d.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1743634_698722470177916_1324795412_n_zps29ab647d.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1920468_698722386844591_1187209605_n_zps13848669.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1920468_698722386844591_1187209605_n_zps13848669.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1920141_698722433511253_122393396_n_zps5bfd92e4.jp g (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1920141_698722433511253_122393396_n_zps5bfd92e4.jp g.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1782066_701286213254875_46993576_n_zps826a9ee7.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1782066_701286213254875_46993576_n_zps826a9ee7.jpg .html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1911909_701286316588198_1658888896_n_zps3b3b8aad.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1911909_701286316588198_1658888896_n_zps3b3b8aad.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1779150_701776589872504_1171386767_n_zps930cfac5.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1779150_701776589872504_1171386767_n_zps930cfac5.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1959522_701770643206432_138952735_n_zpscfe3f8c0.jp g (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1959522_701770643206432_138952735_n_zpscfe3f8c0.jp g.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1620640_701770586539771_1529948819_n_zpsdee2c995.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1620640_701770586539771_1529948819_n_zpsdee2c995.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1920436_701770683206428_1946607051_n_zps7e366c8c.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1920436_701770683206428_1946607051_n_zps7e366c8c.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1620452_701286299921533_2040784591_n_zps2cc214f2.j pg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1620452_701286299921533_2040784591_n_zps2cc214f2.j pg.html)

[George C]

been working on filling the stake pockets in the bed, the 3rd brake light and doing a little mini tubing

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140309_195838_076_zpswm07orjh.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140309_195838_076_zpswm07orjh.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140309_195901_999_zpss6ky7xlr.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140309_195901_999_zpss6ky7xlr.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140310_195432_655_zps5ozmczwa.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140310_195432_655_zps5ozmczwa.jpg.html)


doing the tubs now since the bed is getting a spray-in liner and dont want to mess with cutting apart bed later for when i consider doing some suspension work

[George C]

finished up the factory style mini tubs, once the truck goes to body shop it will be getting a white spray in liner

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140316_155859_806_zpspvsgpmxu.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140316_155859_806_zpspvsgpmxu.jpg.html)

[George C]

started getting firewall ready for paint work... shaved off everything i wasnt using anymore, relocating the wiring harness and filled up a bunch of holes

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140319_213926_769_zpsfjgluaz4.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140319_213926_769_zpsfjgluaz4.jpg.html)

[George C]

since im about looks little more then i am all out race. I wanted things to look as good as i could this one last time on this truck. So i decided to have my built 4l80 painted to match my motor. I dropped it off at body shop to have it painted basecoat/clearcoat with PPG products. paint color is arrival blue

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140327_203912_544_zpshbhijwbr.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140327_203912_544_zpshbhijwbr.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140327_203512_177_zpsnfdprccr.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140327_203512_177_zpsnfdprccr.jpg.html)

since 2006 my truck has had white leather door inserts to go with the two tone leather seats, for 2014 i wanted a all new look. i chose to have my interior dyed with SEM landau black and my door inserts done with black suede

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140327_204024_753_zpspikknknv.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140327_204024_753_zpspikknknv.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140327_204110_444_zpsbpjqzxpg.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140327_204110_444_zpsbpjqzxpg.jpg.html)

[George C]

Finished up the underbed fuel cell filler door tonight, tried to keep it as stock looking as I could

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140330_194103_656_zpsdm1wt29c.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140330_194103_656_zpsdm1wt29c.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140330_194120_598_zpshdtaqwqa.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140330_194120_598_zpshdtaqwqa.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140330_194141_333_zps3e3mi1er.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140330_194141_333_zps3e3mi1er.jpg.html)

[George C]

tonight worked on getting the carpet in place. Started off with applying a nice layer of Dynaliner thru out cab floor and firewall
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140402_203626_406_zps8jzqehqu.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140402_203626_406_zps8jzqehqu.jpg.html)

next up is how the carpet fits and a pic of how little of the bar sticks up thru floor before the clevis
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140402_212838_828_zpsvyhqftww.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140402_212838_828_zpsvyhqftww.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140402_212926_485_zpsg8nwwqws.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140402_212926_485_zpsg8nwwqws.jpg.html)

heres a close up of my carbonfiber door bar protector
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140402_203944_088_zpsqt2sutp3.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140402_203944_088_zpsqt2sutp3.jpg.html)

[George C]

Spent tonight modifying the stock seat brackets to work with the corbeaus. Nice thing about this is can still use the side trim pieces to cover up seat frame.

You can also see how well the bar is tucked up against the door

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140403_205809_424_zpslngm4pdq.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140403_205809_424_zpslngm4pdq.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140403_205834_436_zpsk3d6eh5x.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140403_205834_436_zpsk3d6eh5x.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140403_205849_955_zpsv2kqvuld.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140403_205849_955_zpsv2kqvuld.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140403_210208_403_zpshvl97vj5.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140403_210208_403_zpshvl97vj5.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140403_210131_288_zpstjp4jp5m.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140403_210131_288_zpstjp4jp5m.jpg.html)

[George C]

decided to take a different path as for power plant in this truck...went ahead and bought a LSX block then dropped it off at machineshop

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140410_150708_331_zpshyubnyct.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140410_150708_331_zpshyubnyct.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140410_150700_747_zpsnmqi0z8t.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140410_150700_747_zpsnmqi0z8t.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140410_150534_366_zpsjixwntm5.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140410_150534_366_zpsjixwntm5.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/internals_zps341fed39.jpg (http://s948.photobucket.com/user/Quik611/media/internals_zps341fed39.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/pistons_zps8c00a9e3.jpg (http://s948.photobucket.com/user/Quik611/media/pistons_zps8c00a9e3.jpg.html)

[George C]

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140929_184954_8841_zpsce626ff9.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140929_184954_8841_zpsce626ff9.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140929_185043_9491_zpsf3573117.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140929_185043_9491_zpsf3573117.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140929_210234_6271_zpscbeb6685.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140929_210234_6271_zpscbeb6685.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/IMG_20140929_210244_4601_zps59d90f82.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/IMG_20140929_210244_4601_zps59d90f82.jpg.html)

[George C]

with the 3rd brake light gone, it was time to have roof repainted and the bed liner was done

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/silveradobed_zps44a95bab.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/silveradobed_zps44a95bab.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/gasdoorbedliner_zps7293ec0f.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/gasdoorbedliner_zps7293ec0f.jpg.html)


http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10486252_847236201993208_8788533281147059297_n_zps 0a52ea7e.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10486252_847236201993208_8788533281147059297_n_zps 0a52ea7e.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1466247_847236171993211_9012119897448334837_n_zps5 e0dc097.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1466247_847236171993211_9012119897448334837_n_zps5 e0dc097.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10448762_847236115326550_3172626183677792259_n_zps 734b8b2c.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10448762_847236115326550_3172626183677792259_n_zps 734b8b2c.jpg.html)

[George C]

little block action

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/blockbored_zpsd55d2036.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/blockbored_zpsd55d2036.jpg.html)[/QUOTE]


http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/1517449_863854596998035_7791724632997407063_n_zpsb 8eb004c.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/1517449_863854596998035_7791724632997407063_n_zpsb 8eb004c.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10858414_865895093460652_6784300739632485853_n_zps 468c989e.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10858414_865895093460652_6784300739632485853_n_zps 468c989e.jpg.html)

[George C]

had the wheel side of my front fenders bedlined

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/bedlinedfenders2_zps4e2b570c.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/bedlinedfenders2_zps4e2b570c.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/bedlinedfenders_zps2823164b.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/bedlinedfenders_zps2823164b.jpg.html)

also had my widened wheel tubs done in bedliner

[George C]

well truck was finished up and assembled

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10404225_874309445952550_2776438002442546514_n_zps 645093a5.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10404225_874309445952550_2776438002442546514_n_zps 645093a5.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10885012_873725372677624_4651840261107291785_n_zps a66bdb15.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10885012_873725372677624_4651840261107291785_n_zps a66bdb15.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10882282_874309332619228_83571112700547696_n_zpsba f06f66.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10882282_874309332619228_83571112700547696_n_zpsba f06f66.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10411885_874309845952510_947270879453589443_n_zpsd 37b2806.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10411885_874309845952510_947270879453589443_n_zpsd 37b2806.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10888788_874309705952524_2150256968003410667_n_zps 749b66e0.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10888788_874309705952524_2150256968003410667_n_zps 749b66e0.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10888804_874309602619201_843819790882741759_n_zpsc 9256a63.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10888804_874309602619201_843819790882741759_n_zpsc 9256a63.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10892015_874411329275695_3176857447461182574_n_zps 430a1ba8.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10892015_874411329275695_3176857447461182574_n_zps 430a1ba8.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10891557_874309499285878_8506267744685336884_n_zps 72d2068f.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10891557_874309499285878_8506267744685336884_n_zps 72d2068f.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10896872_874309792619182_852416302652508253_n_zps1 5f56d9f.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10896872_874309792619182_852416302652508253_n_zps1 5f56d9f.jpg.html)

all loaded up and ready to head home

http://i948.photobucket.com/albums/ad325/Quik611/silverado%20build%202014%20revision/10888822_874411319275696_5096349636411667938_n_zps 840942b6.jpg (http://s948.photobucket.com/user/Quik611/media/silverado%20build%202014%20revision/10888822_874411319275696_5096349636411667938_n_zps 840942b6.jpg.html)


the hitch hole in the roll pan is for the chute mount that will be added in near future

[George C]

Contacted a Tint guy and had him come to the garage and tint out the truck.

Front windshield is 35%
sides are 5%
rear is 5%
also had a 2" black vinyl border on the rear to help hide the screws

http://i948.photobucket.com/albums/ad325/Quik611/Tinted%20out%20-%20Copy_zpsuxbevirt.jpg (http://s948.photobucket.com/user/Quik611/media/Tinted%20out%20-%20Copy_zpsuxbevirt.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Tinted%20out%202_zpsalij3aua.jpg (http://s948.photobucket.com/user/Quik611/media/Tinted%20out%202_zpsalij3aua.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Tinted%20out%203_zpszckjnefb.jpg (http://s948.photobucket.com/user/Quik611/media/Tinted%20out%203_zpszckjnefb.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/tinted%20out%204_zpstdg3hlwt.jpg (http://s948.photobucket.com/user/Quik611/media/tinted%20out%204_zpstdg3hlwt.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Tinted%20out%206_zpspipesfrg.jpg (http://s948.photobucket.com/user/Quik611/media/Tinted%20out%206_zpspipesfrg.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/tinted%20out%205_zps38xh7hhb.jpg (http://s948.photobucket.com/user/Quik611/media/tinted%20out%205_zps38xh7hhb.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Tinted%20out%208_zpsryysmdxq.jpg (http://s948.photobucket.com/user/Quik611/media/Tinted%20out%208_zpsryysmdxq.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Tinted%20out%207_zpsgobqinml.jpg (http://s948.photobucket.com/user/Quik611/media/Tinted%20out%207_zpsgobqinml.jpg.html)

[George C]

chute is all finished up, straight race truck stuff

http://i948.photobucket.com/albums/ad325/Quik611/chute%20installed_zps01rl0uzr.jpg (http://s948.photobucket.com/user/Quik611/media/chute%20installed_zps01rl0uzr.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/chute%20installed%204_zpsfqgevqsy.jpg (http://s948.photobucket.com/user/Quik611/media/chute%20installed%204_zpsfqgevqsy.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/chute%20installed%203_zpskx1nkvdv.jpg (http://s948.photobucket.com/user/Quik611/media/chute%20installed%203_zpskx1nkvdv.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/chute%20installed%202_zpssgffyjw2.jpg (http://s948.photobucket.com/user/Quik611/media/chute%20installed%202_zpssgffyjw2.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/chute%20mount_zpsctf6ydxw.jpg (http://s948.photobucket.com/user/Quik611/media/chute%20mount_zpsctf6ydxw.jpg.html)

[George C]

heres a pic of my Mast heads being drilled for 1/2 studs

http://i948.photobucket.com/albums/ad325/Quik611/mast%20heads%20drilled%20for%20studs_zpskmqifd41.j pg (http://s948.photobucket.com/user/Quik611/media/mast%20heads%20drilled%20for%20studs_zpskmqifd41.j pg.html)

[George C]

well My heads showed up and I went a different direction, instead of the Mast 275s I now have the Mast 295s

the mast 295s have a 2.25 intake valve

ive measured the ports and my exhaust port measures 1 13/16 x 1 3/4
my intake port measures 1.260 x 3.250

if you look at the pics my holley Hi ram is much smaller and will need to be ported
I measured that as well and it comes out to .95 x 3.1

http://i948.photobucket.com/albums/ad325/Quik611/11025202_908317372551757_4142844371304881025_n_zps irxehbbe.jpg (http://s948.photobucket.com/user/Quik611/media/11025202_908317372551757_4142844371304881025_n_zps irxehbbe.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/10997459_907856959264465_3435824085308663378_n_zps nrzafnqr.jpg (http://s948.photobucket.com/user/Quik611/media/10997459_907856959264465_3435824085308663378_n_zps nrzafnqr.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/10930856_907856812597813_7136858723103594487_n_zps x1jtnwsq.jpg (http://s948.photobucket.com/user/Quik611/media/10930856_907856812597813_7136858723103594487_n_zps x1jtnwsq.jpg.html)

[George C]

Paid the machine shop a visit and brought home the heart for Cocaine

http://i948.photobucket.com/albums/ad325/Quik611/lsx2_zpsc822aha6.jpg (http://s948.photobucket.com/user/Quik611/media/lsx2_zpsc822aha6.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/lsx3_zpsdwhim9a2.jpg (http://s948.photobucket.com/user/Quik611/media/lsx3_zpsdwhim9a2.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/lsx_zpsqjjwxrgk.jpg (http://s948.photobucket.com/user/Quik611/media/lsx_zpsqjjwxrgk.jpg.html)

[George C]

a run down of motor

Mast 295cc 12* cathedral heads
Diamond ls7 pistons
Callies dragon slayer
Oliver billet I beams
ARP 1/2" head studs torqued to 120ftlbs
ATI super damper with aluminum hub
cam 235/243 646/664 114+4
compression is around 9.68:1 i wanted 10.0 but head swap dropped it
Ported Holley Hi-ram 102
LSX block
Lunati Tie bar lifters
ARP mains hardware

[George C]

havent been much updates on this build as ive been busy with "Sinister"

did get a chance to order my turbos and they finally showed

precision 7675 cea .96ar

http://i948.photobucket.com/albums/ad325/Quik611/precision_zpslkrwahwz.jpg (http://s948.photobucket.com/user/Quik611/media/precision_zpslkrwahwz.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/precision%203_zpstuacyut8.jpg (http://s948.photobucket.com/user/Quik611/media/precision%203_zpstuacyut8.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/precision%202_zpso0endqt3.jpg (http://s948.photobucket.com/user/Quik611/media/precision%202_zpso0endqt3.jpg.html)

[George C]

well with Sinister done and delivered its now time to get back to this project...finally

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10421203_954064201310407_5166210332898576753_n_zps ikdiqpbx.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10421203_954064201310407_5166210332898576753_n_zps ikdiqpbx.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11267736_954066734643487_7785308901801304723_n_zps jafqyfxb.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11267736_954066734643487_7785308901801304723_n_zps jafqyfxb.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11107730_954066754643485_411463381518515676_n_zps0 gwtapfg.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11107730_954066754643485_411463381518515676_n_zps0 gwtapfg.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11036492_954066874643473_161554833357207845_n_zpse 8kepyct.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11036492_954066874643473_161554833357207845_n_zpse 8kepyct.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/1902713_954066854643475_1376165416840559571_n_zpsi smytcfn.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/1902713_954066854643475_1376165416840559571_n_zpsi smytcfn.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11265265_954066794643481_6074595738821643537_n_zps uhvdwwpm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11265265_954066794643481_6074595738821643537_n_zps uhvdwwpm.jpg.html)



picked up 1/2" ss LS header flanges made for sch10
picked up 1/2" ss 3" tube to t4 turbo flanges

twin billet 7675s .96ars

ams500

twin precision 46mm gates

twin tial 50mm bovs

biondo co2 kit


setup is gonna be all aluminum tubing

[George C]

turbos mounted already



http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11295559_846388448786464_8919148667484825896_n_zps aydhxdf0.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11295559_846388448786464_8919148667484825896_n_zps aydhxdf0.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11147209_846388498786459_7683591609465559479_n_zps kk7p3tdd.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11147209_846388498786459_7683591609465559479_n_zps kk7p3tdd.jpg.html)

[George C]

motor is in chassis.....now time to work on headers

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11027954_954172767966217_1125378889910999206_n_zps 1zt6xrlr.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11027954_954172767966217_1125378889910999206_n_zps 1zt6xrlr.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11295915_954172841299543_7711214616965180431_n_zps zk3wammf.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11295915_954172841299543_7711214616965180431_n_zps zk3wammf.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11010613_954172851299542_2960378924106420956_n_zps l8sjfbca.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11010613_954172851299542_2960378924106420956_n_zps l8sjfbca.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/1551633_954172827966211_6701006931215490381_n_zpsz ofib7uo.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/1551633_954172827966211_6701006931215490381_n_zpsz ofib7uo.jpg.html)

[George C]

started making progress on the headers

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11054450_954363824613778_2923153042790599186_n_zps 7ejny66z.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11054450_954363824613778_2923153042790599186_n_zps 7ejny66z.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11351175_954363837947110_7296085474420565936_n_zps kn5mz9eb.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11351175_954363837947110_7296085474420565936_n_zps kn5mz9eb.jpg.html)

decided to play with the up-pipe, waiting on my 2nd BOV to show up

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11113709_954363841280443_1599416069585065441_n_zps 6agizktq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11113709_954363841280443_1599416069585065441_n_zps 6agizktq.jpg.html)

[George C]

well few goodies showed up

my wilwood manual master cylinder and the steeda mounting plate

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11011934_956848811031946_2291398774433075889_n_zps utnoipyo.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11011934_956848811031946_2291398774433075889_n_zps utnoipyo.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10384220_956849017698592_4229264227026622406_n_zps 23ftb7hc.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10384220_956849017698592_4229264227026622406_n_zps 23ftb7hc.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11109688_956849057698588_2941896578799470231_n_zps hrgt2ptq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11109688_956849057698588_2941896578799470231_n_zps hrgt2ptq.jpg.html)

[George C]

and paid my powdercoater a visit and brought home some of my stuff

i had my drop spindles coated, my trans pan, my trans dust cover, DTR 4l80e crossmember and my solid motor stands


decided to use drop spindles and put a tall drag spring in place, this way i get all the spring travel i possibly can run and still have a lower ride height

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11329834_956534794396681_4385182656727665944_n_zps thcsgo5g.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11329834_956534794396681_4385182656727665944_n_zps thcsgo5g.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11390296_956535254396635_4413494649883058737_n_zps z0vqjkjz.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11390296_956535254396635_4413494649883058737_n_zps z0vqjkjz.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10488173_956535107729983_6631828452146103376_n_zps esjlci5l.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10488173_956535107729983_6631828452146103376_n_zps esjlci5l.jpg.html)

[George C]

and my nice money shot teaser........ my bead locks

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10436156_956534834396677_1593522543178534879_n_zps xfv7nuct.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10436156_956534834396677_1593522543178534879_n_zps xfv7nuct.jpg.html)

[George C]

was able to get the manual master mounted for now, before final assembly ill have the mounting plates coated white

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11391330_957092571007570_6516279892525322189_n_zps pu0hwys7.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11391330_957092571007570_6516279892525322189_n_zps pu0hwys7.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11159498_957092561007571_3443367801909890319_n_zps isqcmixh.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11159498_957092561007571_3443367801909890319_n_zps isqcmixh.jpg.html)

[George C]

got the solid motor stands in place

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11169242_957882570928570_1363658760758065593_n_zps l1xsubgq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11169242_957882570928570_1363658760758065593_n_zps l1xsubgq.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/1530527_957882594261901_2735681085024239914_n_zpsl jpncbz7.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/1530527_957882594261901_2735681085024239914_n_zpsl jpncbz7.jpg.html)

[George C]

didnt get alot done today but did make some progress on the driverside header

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11206060_957976060919221_7340390664260419932_n_zps 4d09hzoq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11206060_957976060919221_7340390664260419932_n_zps 4d09hzoq.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11011808_957976084252552_4499099857555053582_n_zps kqyntjqa.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11011808_957976084252552_4499099857555053582_n_zps kqyntjqa.jpg.html)

[Ares]

Let me be first to say.

That is one bad ass truck. I like it, I like it a lot :goodidea:

[MrAudia]

Cool ass project!

[Fast Gypsy]

If it runs as good as it looks, your going to be a holy terror.

[George C]

If it runs as good as it looks, your going to be a holy terror.

motor was built to make around 1500 rwhp safely.....trying to target 3800-3900lbs this time around

heads flow around 390cfm at 700 lift

will be on e85 or possibly e98 for fuel

[John4cam]

cleaning off my keyboard.

[Flyin Monkey]

That's sweet! who did the cage work?

[Silverhatch]

Very nice.

[black 94]

Very nice work. Looks good.

[PaxtonShelby]

Wow that's one hell of a truck! Nice work! What size tire can you fit under the rear now? Enough to hook with all that power? Keep the updates coming!

[George C]

That's sweet! who did the cage work?

i did and will be adding on more bars to turn it into a 10pt

[George C]

Wow that's one hell of a truck! Nice work! What size tire can you fit under the rear now? Enough to hook with all that power? Keep the updates coming!

only plan to run either a 275pro or for now a 315 radial

tubs were done so when i go ladder or 4 link setup later on down the road

[somethingclever]

nice work George.

[RUTHLESS]

Wow with all of that at your disposal I see why you belittle people on the internet that cant do everything themselves. Must be nice! Then again I heard you have been hanging out a street lethal. :wave:

[sutyak]

Amazing setup. I can't wait to see it done! Fantastic fabrication work.

[Mark Aubele]

I came. Like 4 times.

Seriously sick truck, nice work.

[George C]

Wow with all of that at your disposal I see why you belittle people on the internet that cant do everything themselves. Must be nice! Then again I heard you have been hanging out a street lethal. :wave:

They built my two motors

As for the other comment, if you want to start shit we can meet up and have a few drinks otherwise keep comments to yourself

[George C]

Amazing setup. I can't wait to see it done! Fantastic fabrication work.

Thanks and there's still a lot of work ahead...stay tuned

[Dan B.]

V8 race trucks are over rated.........

[GOT SVT]

nice build

are you interested in coming to the track rental?

what is up with the ford engine on the stand?

[George C]

nice build

are you interested in coming to the track rental?

what is up with the ford engine on the stand?

That's a 10.25cr 5.4 4v
Ford GT heads with upgraded valve springs
Custom diamond pistons
Oliver billet I beam rods
Cobra jet crankshaft
.020 over bore
Boss 302 intake
6Layer cometic gaskets
ARP thru out


Motor was built for my lightning and target power is 1200-1300 with that motor


As for rental....I don't have anything ready, my procharged daily needs the gears done in the front prior to me making passes

[Stangman701]

Truck looks good man. Glad to see it's still around and getting even faster.

[Jeff95TA]

Great work George!

[zxgto06]

Looks sick. I'm sure I'll be over to see it.

[George C]

Racetruck rad showed up LOL

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11392852_958512514198909_5386985073952262538_n_zps zr3nnjht.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11392852_958512514198909_5386985073952262538_n_zps zr3nnjht.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11391700_958512587532235_710345307302617165_n_zpsb pisflig.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11391700_958512587532235_710345307302617165_n_zpsb pisflig.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11390218_958512387532255_7939631654583595614_n_zps iqzevicn.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11390218_958512387532255_7939631654583595614_n_zps iqzevicn.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11391501_958472207536273_5371616225421594891_n_zps ebdtcqdp.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11024794_958472170869610_1304273725363346843_n_zps hwv6bjap.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11024794_958472170869610_1304273725363346843_n_zps hwv6bjap.jpg

[George C]

and finished up tacking the driver's header together

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10374515_958453864204774_3372390713174644353_n_zps jstgwao4.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10374515_958453864204774_3372390713174644353_n_zps jstgwao4.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10930985_958453837538110_6669208063009094808_n_zps xuaubob8.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10930985_958453837538110_6669208063009094808_n_zps xuaubob8.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11392925_958512814198879_64638981740243537_n_zpsjo npmyax.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11392925_958512814198879_64638981740243537_n_zpsjo npmyax.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11145211_958512770865550_8696652710249010913_n_zps p84pio3j.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11145211_958512770865550_8696652710249010913_n_zps p84pio3j.jpg.html)

[Seer]

looking good

[Terminated]

Been following on FB, looking great.

[scorpio333]

Not bad for a farm wagon with square wheel wells :snicker:

Just kidding!!!

[PaxtonShelby]

I keep looking at this amazing build. What's up with the Cocaine name?

[George C]

Buddy named it that and cocaine would be cheaper

[PaxtonShelby]

Haha - that's great! Thanks for the explanation. "Trophy Wife" would work too...

[George C]

got around to mounting the wastegate for driverside

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/DRS%20wastegate_zps2ekkavyi.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/DRS%20wastegate_zps2ekkavyi.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/DRS%20wastegate%202_zps04caydsh.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/DRS%20wastegate%202_zps04caydsh.jpg.html)

and started working on the driverside downpipe

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/downpipe%204_zpsypi5xomo.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/downpipe%204_zpsypi5xomo.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/downpipe_zpslltwhga5.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/downpipe_zpslltwhga5.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/downpipe%207_zpsicyqlbyf.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/downpipe%207_zpsicyqlbyf.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/downpipe%205_zpswcgqlrun.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/downpipe%205_zpswcgqlrun.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/down%20pipe%208_zpsyjthcnuq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/down%20pipe%208_zpsyjthcnuq.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/downpipe%202_zpsmrqmmfia.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/downpipe%202_zpsmrqmmfia.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/downpipe%206_zpsxwkpkndh.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/downpipe%206_zpsxwkpkndh.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/downpipe%203_zpsjl1ljepi.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/downpipe%203_zpsjl1ljepi.jpg.html)

[thedak]

Damn.....

[RUTHLESS]

They built my two motors

As for the other comment, if you want to start shit we can meet up and have a few drinks otherwise keep comments to yourself

LOL Double standards, got to love them.


On that note... I am outa here.

[George C]

LOL Double standards, got to love them.


On that note... I am outa here.

You can stay and enjoy the build if you would like to just keep your shitty replies to yourself or until you meet me at the bar

[George C]

started making some progress on the pass side header

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10356311_960773627306131_3346807537846358462_n_zps mdqevrly.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10356311_960773627306131_3346807537846358462_n_zps mdqevrly.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11377102_960773600639467_5114493106368756861_n_zps rwspipmj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11377102_960773600639467_5114493106368756861_n_zps rwspipmj.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11400977_960773623972798_1662579861093127124_n_zps vcwlkq0h.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11400977_960773623972798_1662579861093127124_n_zps vcwlkq0h.jpg.html)

[George C]

was able to get around to working on the pass side header

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/pass%20header_zps7za5tcuh.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/pass%20header_zps7za5tcuh.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/pass%20header%202_zpsk5kc6bue.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/pass%20header%202_zpsk5kc6bue.jpg.html)

[zxgto06]

Looks awesome!

[George C]

was also able to make some progress on the pass side dp tonight

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/pass%20side%20dp%202_zpsfomgcu1j.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/pass%20side%20dp%202_zpsfomgcu1j.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/pass%20side%20dp_zps2ykldmqi.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/pass%20side%20dp_zps2ykldmqi.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/pass%20side%20dp%203_zpsvmlnsqf9.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/pass%20side%20dp%203_zpsvmlnsqf9.jpg.html)

[George C]

engine bay shot

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/turbo%20kit_zpsjgqgfugv.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/turbo%20kit_zpsjgqgfugv.jpg.html)

[George C]

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/manual%20rack%203_zpsnazzcoak.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/manual%20rack%203_zpsnazzcoak.jpg.html)

[George C]

well here it is, manual steering rack that bolts in place and everything i used to do the job

made a 2" long sleeve for the bushings
i shaved down the one shaft to be able to slide into the trucks column

rack to rack this mod dropped 14lbs

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11181873_967705266612967_6663029447106111651_n_zps 26qdveqj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11181873_967705266612967_6663029447106111651_n_zps 26qdveqj.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/1535002_967705379946289_4781594256278674700_n%20-%20Copy_zpsrz9thqtp.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/1535002_967705379946289_4781594256278674700_n%20-%20Copy_zpsrz9thqtp.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11165230_967705149946312_6205555624886359213_n_zps 7hrljov4.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11165230_967705149946312_6205555624886359213_n_zps 7hrljov4.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/1970374_967705269946300_6102230108256896083_n_zpsm wlyctfu.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/1970374_967705269946300_6102230108256896083_n_zpsm wlyctfu.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11377179_967704679946359_759040389963036918_n_zpss 9bgpcz2.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11377179_967704679946359_759040389963036918_n_zpss 9bgpcz2.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11536026_967705026612991_9151119713024231571_n_zps e4vofb36.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11536026_967705026612991_9151119713024231571_n_zps e4vofb36.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10342909_967704269946400_3904484740947965629_n_zps xjwlfsbj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10342909_967704269946400_3904484740947965629_n_zps xjwlfsbj.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/1487350_967705343279626_4686063905632932847_n_zpsw 1lusfs4.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/1487350_967705343279626_4686063905632932847_n_zpsw 1lusfs4.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11406699_967704939946333_2974455081650744563_n_zps vs1u821u.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11406699_967704939946333_2974455081650744563_n_zps vs1u821u.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11167990_967705359946291_4750353499351516963_n_zps yffnkpqe.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11167990_967705359946291_4750353499351516963_n_zps yffnkpqe.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11233345_967705366612957_4886790615524688665_n_zps m2xgqtbn.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11233345_967705366612957_4886790615524688665_n_zps m2xgqtbn.jpg.html)

[Terminated]

There is one thing I will never wonder, if another man slid the shaft in 100%

[George C]

heres teaser of my rear wheels

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/bogart_zpsu0vjc7bo.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/bogart_zpsu0vjc7bo.jpg.html)

[George C]

ok found some tie rods that will work but some modding is required

first you will need access to a ball joint/ Tie rod reamer

youll also need to trim the outer and inner tie rod some

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11277914_971529152897245_445272877_n_zpsqymzhnu4.j pg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11277914_971529152897245_445272877_n_zpsqymzhnu4.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11653475_972082369508590_598891398_n_zpslejteouo.j pg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11653475_972082369508590_598891398_n_zpslejteouo.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11647388_972082382841922_149051611_n_zpsc8guw6a7.j pg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11647388_972082382841922_149051611_n_zpsc8guw6a7.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11668050_972082372841923_2059357246_n_zpswer4eylf. jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11668050_972082372841923_2059357246_n_zpswer4eylf. jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11657346_971529146230579_1396716625_n_zpsyqyd1iwr. jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11657346_971529146230579_1396716625_n_zpsyqyd1iwr. jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11657485_972083936175100_14179372_n_zpsqhp6azju.jp g (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11657485_972083936175100_14179372_n_zpsqhp6azju.jp g.html)

[George C]

Heres my new injectors and driver

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/injector%20driver_zpsedefj8qo.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/injector%20driver_zpsedefj8qo.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/injectors_zpsd8b9huwl.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/injectors_zpsd8b9huwl.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/injectors%202_zpszy7ojtfk.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/injectors%202_zpszy7ojtfk.jpg.html)

[somethingclever]

Cocaine would def be cheaper

[ebo 4356]

Looks great buddy!

[George C]

pic of the crank mandrel setup for the belt driven fuel pump, gonna try the 21 tooth pulley and see where the gets me

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11039099_973179062732254_6184706238883579896_n_zps irhc96py.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11039099_973179062732254_6184706238883579896_n_zps irhc96py.jpg.html)

started playing with pulley spacing, now just have to cut the mandrel spacers and find a belt

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10986873_973248126058681_5675009447433374136_n_zps 4ln3wgmt.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10986873_973248126058681_5675009447433374136_n_zps 4ln3wgmt.jpg.html)

[George C]

pic of the new front suspension, just now need to order new front shocks
had everything powdercoated black
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10423923_973177809399046_8586971959711628182_n_zps 5icxmgjm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10423923_973177809399046_8586971959711628182_n_zps 5icxmgjm.jpg.html)

[George C]

had a few things coated black as well

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/1395335_973273369389490_6980437802744843683_n_zpse jiilr2v.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/1395335_973273369389490_6980437802744843683_n_zpse jiilr2v.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11403178_973273269389500_810802018292994526_n_zpsd eeox0jl.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11403178_973273269389500_810802018292994526_n_zpsd eeox0jl.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/10423291_973282809388546_4111589710894336664_n_zps sxgdoc1l.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/10423291_973282809388546_4111589710894336664_n_zps sxgdoc1l.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11665572_973282506055243_480917317801315923_n_zpsg d8d3bqk.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11665572_973282506055243_480917317801315923_n_zpsg d8d3bqk.jpg.html)

[Fast Gypsy]

Your carbon fiber door protector caught my eye. Any info on that? Thanks Vince

[George C]

Your carbon fiber door protector caught my eye. Any info on that? Thanks Vince

was bought from A.R.T.
applied racing technology

[George C]

Here ya go belt driven fuel pump
Belt number for Gilmer belt
Truck ac bracket
Gz motorsport mandrel
Gm alternator bolts with 2.125" spacers
Automotive fuel pump

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20pump%20belt_zps08vwaujd.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20pump%20belt_zps08vwaujd.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20pump%20belt%202_zpsqog0xqtz.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20pump%20belt%202_zpsqog0xqtz.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20pump%20belt%203_zpshwdwmxez.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20pump%20belt%203_zpshwdwmxez.jpg.html)


for those wondering the pump isnt tightened in its mount, pics were taken and now everything that needs coated is going to powdercoater

[George C]

15x11 with beadlocks
7" back spacing
mickey thompson 315/60/15 radials

the 9.5" 14bolt must be slightly wider then the 10 bolt truck came with.. these were supposed to tuck alot more. I had always thought my rear was wider then my 10 bolt..Ever since i installed it my SS 20s stuck out some

if you zoom in i have 3/4" clearance

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11692981_975002442549916_1569023047_n_zpsz6i4zsfk. jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11692981_975002442549916_1569023047_n_zpsz6i4zsfk. jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11692895_975004392549721_306144823_n_zpsgwl8hndh.j pg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11692895_975004392549721_306144823_n_zpsgwl8hndh.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11650470_975002482549912_323257838_n_zpshi8wib7y.j pg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11650470_975002482549912_323257838_n_zpshi8wib7y.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11650708_975002459216581_993298269_n_zpse7zqycgd.j pg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11650708_975002459216581_993298269_n_zpse7zqycgd.j pg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11655187_975002475883246_1101465023_n_zps77mwz8pz. jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11655187_975002475883246_1101465023_n_zps77mwz8pz. jpg.html)

[TooFast98Cobra]

Looks great ! A dewalt 18v works great to prime that baby.

[George C]

My new chromoly front support
The lower part weighs in at 8.5lbs
I still have to make tabs to secure lower part of bumper cover and couple outriggers for the rad support
If you're thinking what all the stock weighed in at...it was around 60lbs not counting the bumper

O btw the long bolt with spacers arent permanent, used what i had till i can go to hardware store


http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/intercooler%20mount%204_zpszcp4ajsd.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/intercooler%20mount%204_zpszcp4ajsd.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/intercooler%20mount%208_zpst7worqol.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/intercooler%20mount%208_zpst7worqol.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Intercooler%20mount_zpseg8nyiqj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Intercooler%20mount_zpseg8nyiqj.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/intercooler%20mount%207_zpselgizmdp.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/intercooler%20mount%207_zpselgizmdp.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/intercooler%20mount%206_zpsvcmzqpbg.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/intercooler%20mount%206_zpsvcmzqpbg.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/intercooler%20mount%205_zpsja8b5pkk.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/intercooler%20mount%205_zpsja8b5pkk.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/intercooler%20mount%203_zpsnab3nojm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/intercooler%20mount%203_zpsnab3nojm.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/intercooler%20mount%202_zps6r03yerq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/intercooler%20mount%202_zps6r03yerq.jpg.html)

[George C]

old spring vs new drag spring....these should help with transfer

old spring was 1 coil cut V6 springs

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/drag%20spring%20vs%20stock_zpsc0lc3psw.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/drag%20spring%20vs%20stock_zpsc0lc3psw.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/drag%20spring%20vs%20stock%202_zpssukfo6ek.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/drag%20spring%20vs%20stock%202_zpssukfo6ek.jpg.htm l)

[somethingclever]

Looking good....nice work.

[George C]

heres how i attached the bumper cover

youll see pics of it attached to the grill, chassis and the fenders

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/bumper%20attached%202_zpsbj1zlz4v.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/bumper%20attached%202_zpsbj1zlz4v.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/bumper%20attached%204_zpsgwwrpsbl.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/bumper%20attached%204_zpsgwwrpsbl.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/bumper%20attached_zpsttmrutqf.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/bumper%20attached_zpsttmrutqf.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/bumper%20attached%203_zps8rmhjyrw.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/bumper%20attached%203_zps8rmhjyrw.jpg.html)

[George C]

and some wheel porn

28x6x17 MT front radials
316x60x15 MT drag radials

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/bogarts%20with%20radials_zpse7lbsura.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/bogarts%20with%20radials_zpse7lbsura.jpg.html)

[George C]

went ahead and had a few things jet hot coated

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/jet%20hot%20coated_zpsu9gxeilb.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/jet%20hot%20coated_zpsu9gxeilb.jpg.html)

[George C]

after speaking with a few ppl Ive decided to go ahead and raise the upper mount for my shock 1.5", this will help get a longer shock in place that will have more stroke

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rasied%20shock%202_zpsh5xrjwrw.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rasied%20shock%202_zpsh5xrjwrw.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rasied%20shock_zpsedjtgh5u.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rasied%20shock_zpsedjtgh5u.jpg.html)

[street591]

Pics of the white.......duramax?

[George C]

couple pics here of the manual rack, tubular motor mounts and how the fuel pump sits inside the engine bay

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20pump%20engine_zpsjvls66nn.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20pump%20engine_zpsjvls66nn.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/tubular%20motor%20mount%202_zps4txwomjv.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/tubular%20motor%20mount%202_zps4txwomjv.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/steering%20rack_zpsoqtcvitl.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/steering%20rack_zpsoqtcvitl.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/tubular%20motor%20mount_zps6xxkudke.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/tubular%20motor%20mount_zps6xxkudke.jpg.html)

[George C]

few pics of the truck rolled outside the garage

theres no weight in the ass of the truck and gonna pick up a front coil spring spacer as the front is little lower then Id like

theres gonna be around 250-300lbs added to rear of truck with the weight from the batteries and fuel cell
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Kane%20garage_zpsmecpe71g.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Kane%20garage_zpsmecpe71g.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/kane%206_zpsv9egjpbe.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/kane%206_zpsv9egjpbe.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/kane%205_zpssmxdol3e.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/kane%205_zpssmxdol3e.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/kane%204_zpsrfy4wm91.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/kane%204_zpsrfy4wm91.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/kane%202_zpsccseyari.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/kane%202_zpsccseyari.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/kane%207_zpsnbi3eikx.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/kane%207_zpsnbi3eikx.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/kane%203_zpsbg8ftvk4.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/kane%203_zpsbg8ftvk4.jpg.html)

[George C]

heres a few pics of the engine bay with the headers and part of downpipes coated, along with frame painted

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/engine%20bay_zpsjpttlixw.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/engine%20bay_zpsjpttlixw.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/engine%20bay%202_zps95xlpjvw.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/engine%20bay%202_zps95xlpjvw.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/engine%20bay%203_zpshna0w5gm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/engine%20bay%203_zpshna0w5gm.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/engine%20bay%206_zpsx27yt4ks.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/engine%20bay%206_zpsx27yt4ks.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/engine%20bay%205_zpsx5ofsbyb.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/engine%20bay%205_zpsx5ofsbyb.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/engine%20bay%204_zpssbh0pozq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/engine%20bay%204_zpssbh0pozq.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20pump%20engine%20headers_zpsmehm3kno.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20pump%20engine%20headers_zpsmehm3kno.jpg.htm l)

[somethingclever]

About as professional looking as I have ever seen.

I am impressed.

[George C]

About as professional looking as I have ever seen.

I am impressed.

thank you, its been alot of work lately and still plenty of work left

[Terminated]

Looking good man. Always clean work on your rides.

[07v6vistablue]

Really Nice truck and the craftsmanship is top notch!

[ERR0RMACR0]

Wow, crazy build--nice work!

[Fast Gypsy]

Any guesstimations on your times or better yet, where do you want to be. That is one beautiful truck !

[George C]

Made some good progress today
Wrapped the Downpipes
Modded the rad (changed the filler neck)
Made mounts to secure rad to A frame
Found a fan to work with rad...(GTO AC fan)
Built my charge pipe


http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/charge%20pipe%203_zpsnvmh1kfi.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/charge%20pipe%204_zpsebczpyuk.jpg.html)http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/charge%20pipe%202_zpszfk0rasw.jpg
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/charge%20pipe%204_zpsebczpyuk.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/charge%20pipe%204_zpsebczpyuk.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/charge%20pipe%205_zpsctufmnwd.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/charge%20pipe%205_zpsctufmnwd.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/charge%20pipe%206_zps8am2dpww.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/charge%20pipe%206_zps8am2dpww.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/charge%20pipe_zps8yi4adog.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/charge%20pipe_zps8yi4adog.jpg.html)

[George C]

Any guesstimations on your times or better yet, where do you want to be. That is one beautiful truck !

bottom 8s

[George C]

its been 9 yrs now since truck was last a auto and now for this build truck is an auto, i sit back and wonder how things would of been if i would of stayed auto....hell the 4.8 record would of been set back in 09? but thats history and here are some pics

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/trans_zps4i2iwdks.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/trans_zps4i2iwdks.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/trans%204_zpsilfrllk6.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/trans%204_zpsilfrllk6.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/trans%203_zpssugn2yww.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/trans%203_zpssugn2yww.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/trans%202_zpshhm9gkzm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/trans%202_zpshhm9gkzm.jpg.html)


alot of paint and powdercoat in these pics

[George C]

Today has been a daughter day since yesterday was 12hrs in garage so was able to toss nose on and take a money shot

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/whore%20pic_zpsvsydb6yj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/whore%20pic_zpsvsydb6yj.jpg.html)

[George C]

heres a pic of the JDM drag spring installed, found some info to what rate they are and they are light. at full lenght they rate around 350-375 also have a skyjacker 2" lift spacer in place

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/JDM%20drag%20spring%20installed_zpsowtz5r1a.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/JDM%20drag%20spring%20installed_zpsowtz5r1a.jpg.ht ml)

[Silverhatch]

Very nice. Alot of patience with a clean build such as this, I like the gumband clamp.

[George C]

Very nice. Alot of patience with a clean build such as this, I like the gumband clamp.

That's cause i haven't gotten to that part of build yet...it's how I took it from box it came out of

[George C]

turbos to intercooler piping is done, now its time to disassemble everything have all powdercoated and painted

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/PS%20turbo%20to%20IC_zpshhltclgf.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/PS%20turbo%20to%20IC_zpshhltclgf.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/PS%20turbo%20to%20IC%202_zpseeg8d62t.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/PS%20turbo%20to%20IC%202_zpseeg8d62t.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/DR%20turbo%20to%20IC_zpscmxjlxjm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/DR%20turbo%20to%20IC_zpscmxjlxjm.jpg.html)

[George C]

with everything at the coaters, It was time to move into the cab and add bars to the 8pt to turn it into a 10pt

also the interior panels you see are the mock up ones, my good ones are being dyed black

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11825197_991812944202199_1918866052552672167_n_zps sctcer6e.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11825197_991812944202199_1918866052552672167_n_zps sctcer6e.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11800492_991813064202187_1646212258310535064_n_zps iizqrhwf.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11800492_991813064202187_1646212258310535064_n_zps iizqrhwf.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11800105_991812957535531_7926483867265343391_n_zps wo0d7i5y.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11800105_991812957535531_7926483867265343391_n_zps wo0d7i5y.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11822863_991813070868853_990030500565809144_n_zpss lhhybcq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11822863_991813070868853_990030500565809144_n_zpss lhhybcq.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11836906_991885914194902_8843322934856889956_n_zps dxqkgsxp.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11836906_991885914194902_8843322934856889956_n_zps dxqkgsxp.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11822438_991885894194904_1607914626332157852_n_zps bqxoqikj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11822438_991885894194904_1607914626332157852_n_zps bqxoqikj.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11828768_991885854194908_1199885571064636384_n_zps 55njeuml.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11828768_991885854194908_1199885571064636384_n_zps 55njeuml.jpg.html)

[RUTHLESS]

Man the truck looks good. Like some people have said, your work is top notch but your attitude drives people away. If you could curb that you would have a hand full of trucks like this sitting in your garage. I am not being a dick, just giving you something to think about and learn from some of the shops you visit.

[George C]

Man the truck looks good. Like some people have said, your work is top notch but your attitude drives people away. If you could curb that you would have a hand full of trucks like this sitting in your garage. I am not being a dick, just giving you something to think about and learn from some of the shops you visit.

well thank you for the kind words but I do have a list of trucks and cars lined up

[RUTHLESS]

I meant that you own.

[George C]

I meant that you own.

got ya, I do have a good list of vehicles which typically are modded cause of side work

[somethingclever]

Very impressive work George.

[RUTHLESS]

Now that we are having a civil chat, I do have a question about your builds and turbo choice. Do you find that the higher ci of the LS builds requires the twin 76mm turbos? Coming from the modular side of things and less ci it cause hellish turbo lag. I think the biggest I would go on a built mod engine is twin 67s or a single 88mm. Both options would take us to some crazy power figures on the proper fuel.

[George C]

Now that we are having a civil chat, I do have a question about your builds and turbo choice. Do you find that the higher ci of the LS builds requires the twin 76mm turbos? Coming from the modular side of things and less ci it cause hellish turbo lag. I think the biggest I would go on a built mod engine is twin 67s or a single 88mm. Both options would take us to some crazy power figures on the proper fuel.

something you need to consider and its easily over looked, ppl look at compressor size when you need to be looking at turbine size....You can only flow as much as the turbine can flow so the compressor size isnt as important as many think

take these examples, that 2010 camaro i built it has 7665s, thats a 76 compressor paired with a 65mm turbine... the 65mm turbine will never max the compressor out.. This combo flows almost the same as the 6265s i had originally on the car but with the cost of them its why they were used

now when you have a even pair like my 7675 the turbine speed is matched with compressor speed so they max out together

now you have outlaw 76s which some of them have 100mm turbine wheels, these are typically 1/8 mile turbos, they want max boost now and not be choked up by turbine

as for Mod motors, there was a lightning with a similar motor as I have for my lightning that ran similar turbos as my 427...that truck ran 7s

problem is with say the smaller motors like your 4.6 is they just dont have the flow to support a large turbine unless they spin serious RPMS, but for a combo like that you need gearing, compression, huge stall to get off the bottom and use full topend


like the lightning i did with the billet 8284 with having the turbine slightly larger then compressor its a good match for a 5.4

with todays turbos the old way of thinking is basically thrown out the window since the modern turbos make up for such "lag" as some would say.

[George C]

got around to making the Pass A pillar bar and then tackled the windshield bar

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11825069_992246267492200_1053425627699254529_n_zps wej13xcm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11825069_992246267492200_1053425627699254529_n_zps wej13xcm.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11229285_992246254158868_7152470556719741921_n_zps nkluq37q.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11229285_992246254158868_7152470556719741921_n_zps nkluq37q.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11099543_992246257492201_6559923268147234406_n_zps pexmyfoo.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11099543_992246257492201_6559923268147234406_n_zps pexmyfoo.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11217530_992246230825537_8742051993933485789_n_zps jft0savz.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11217530_992246230825537_8742051993933485789_n_zps jft0savz.jpg.html)

[George C]

more pics of the cage, still need to add the window net and the chute handle

http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage4_zpsuj7bzesa.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage4_zpsuj7bzesa.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage7_zps4tbzcoj6.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage7_zps4tbzcoj6.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage8_zpsgp4t78o1.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage8_zpsgp4t78o1.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage9_zpsdn0llw4h.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage9_zpsdn0llw4h.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage3_zpsye84km9d.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage3_zpsye84km9d.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage_zps9tzfhgbu.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage_zps9tzfhgbu.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage2_zpscn9o6b9k.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage2_zpscn9o6b9k.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage6_zpsrjmuwept.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage6_zpsrjmuwept.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage5_zpsy3svt0ln.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage5_zpsy3svt0ln.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage10_zps5vwrr3wp.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage10_zps5vwrr3wp.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/cage11_zpst3dodw9h.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/cage11_zpst3dodw9h.jpg.html)

[George C]

got my window net mounted
http://i948.photobucket.com/albums/ad325/Quik611/cocaine%20cage/window%20net_zpspumigfew.jpg (http://s948.photobucket.com/user/Quik611/media/cocaine%20cage/window%20net_zpspumigfew.jpg.html)

[zxgto06]

Lookin really nice

[GOT SVT]

progressing well

keep the pics and updates coming, thanks

[PaxtonShelby]

One badassssss truck for sure!

[George C]

progressing well

keep the pics and updates coming, thanks

thanks, it sure is alot of work doing it by myself...now this hurdle is done its time to move onto rear suspension

[George C]

One badassssss truck for sure!

thank you very much, this build has taken alot out of me but im enjoying seeing it come together

[thedak]

One of the nicest builds I've ever seen

[George C]

picked up everything from the coaters and heres my pic whoring

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coated_zpswmwewerc.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coated_zpswmwewerc.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coated6_zpsn3q4kcyb.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coated6_zpsn3q4kcyb.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coated5_zpsuud27efq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coated5_zpsuud27efq.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coated4_zpsythicqzx.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coated4_zpsythicqzx.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coated7_zpsbtwrwstj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coated7_zpsbtwrwstj.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coated2_zpsojrlwzch.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coated2_zpsojrlwzch.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coated3_zpstspt85sk.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coated3_zpstspt85sk.jpg.html)

[1320goat]

Nice build

[Ares]

That is coming together really good. Looks great.

[George C]

That is coming together really good. Looks great.

are you on yellowbullet and just recently finished the inside of your enclosed trailer?

[George C]

not a whole lot of progress but got around to making my wastegate dumps
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/wastegates3_zpscanolrfg.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/wastegates3_zpscanolrfg.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/wastegates2_zpstydavrdc.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/wastegates2_zpstydavrdc.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/wastegates_zps1mas4kwr.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/wastegates_zps1mas4kwr.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/wastegates4_zpsjdhimvyg.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/wastegates4_zpsjdhimvyg.jpg.html)

also went ahead and welded -10 an bungs onto my heatercore
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/heater%20core_zpsvtym1lnn.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/heater%20core_zpsvtym1lnn.jpg.html)

[SlowSix]

This thread really makes me consider it when we talked about re-working my turbo kit, lol

[George C]

well today was a very busy day, I was able to make some good progress

chromoly ARB built and installed
chromoly shock bar bent and installed
chromoly shock bracket support
relocated shock brackets


shocks pictured are my old ranchos which they were only used for mock up, ill be ordering AfCO double adjustables shortly

gonna finish welding everything off then ship rear off to powdercoaters, while rear is at coaters im gonna paint the rear section of frame and bed

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rear%20suspension_zpsdd7zhyba.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rear%20suspension_zpsdd7zhyba.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rear%20suspension%207_zpscaazr1re.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rear%20suspension%207_zpscaazr1re.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rear%20suspension%205_zpso3ryfixi.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rear%20suspension%205_zpso3ryfixi.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rear%20suspension%204_zpsgxbwnfsa.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rear%20suspension%204_zpsgxbwnfsa.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rear%20suspension%203_zpsmcd3fs4n.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rear%20suspension%203_zpsmcd3fs4n.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rear%20suspension%206_zpsdz4rjroi.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rear%20suspension%206_zpsdz4rjroi.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rear%20suspension%202_zpspxmjp0ls.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rear%20suspension%202_zpspxmjp0ls.jpg.html)

[Ares]

are you on yellowbullet and just recently finished the inside of your enclosed trailer?


Yes and yes. Well except for the ceiling. Still have to figure out what I want to do with ceiling and lighting.

[George C]

finished up the fab work on the chassis, dropping the rear and everything else off at the coaters on friday...time to paint the rest of the underside of the truck/frame gloss black to match the rest

in this pic youll see dual battery mounts, youll see 2 driveshaft loops and D-bar braces

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/11888037_999468560103304_8371546725471288375_n_zps ifqiyfsk.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/11888037_999468560103304_8371546725471288375_n_zps ifqiyfsk.jpg.html)

[PaxtonShelby]

I was hoping that rear end would be getting some powder! Nice!!

[George C]

I was hoping that rear end would be getting some powder! Nice!!

rear, ARB, ARB end links, shock brackets all going black powder, the girdle probably go back to a bright silver


also forgot to mention my double adjustable AFCO racing shocks were ordered

[PaxtonShelby]

Where do you go for powdercoating?

[George C]

Where do you go for powdercoating?

AMF in imperial been dealing with him since he first opened..has always treated me right over the last decade

[PaxtonShelby]

AMF in imperial been dealing with him since he first opened..has always treated me right over the last decade

That's great to hear. My buddy had good luck with AMF and they are 15 minutes from me. Who there do you typically deal with?

[George C]

That's great to hear. My buddy had good luck with AMF and they are 15 minutes from me. Who there do you typically deal with?

owner Jason

[thedak]

He is a good dude

[George C]

my AFCO double adjustables showed up

another advantage to these is how light they are, my old adjustable shocks were 9lbs each and these weigh in at 3.5lbs

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/shocks_zps9evky0x1.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/shocks_zps9evky0x1.jpg.html)

[JeffreyCole]

What is the horsepower/ET goals for this truck?

Those 7675's are rated by PTE at 1200HP... Each.

Mother of god.

[George C]

What is the horsepower/ET goals for this truck?

Those 7675's are rated by PTE at 1200HP... Each.

Mother of god.

Actually these specific ones are around 1300 each but yea

Truck has a lot of coin in it and is well over built for the first goals ....future plans are 4link with Fab 9" possibly add onto cage to make it legal for faster times

As for power take a guess....225lb injectors, 427 9.68cr, 6 bolt heads along with 1/2" stud upgrade, billet rods, heads flow 390 at 700lift, current cam is 646/664 lift

[Ares]

1500ish?

[somethingclever]

390 cfm @ .700 is pretty good for a "small block" head.

[PaxtonShelby]

What kind of mpg do you expect from this puppy?

[George C]

What kind of mpg do you expect from this puppy?

i have no care as to what it gets for fuel mileage

[PaxtonShelby]

i have no care as to what it gets for fuel mileage

I just had to ask before John. :rotflol:

[George C]

390 cfm @ .700 is pretty good for a "small block" head.

figuring the stock heads this truck came with in 2002 only flowed 220....

[George C]

I just had to ask before John. :rotflol:

i see must be a tight circle jerk kind of post

[somethingclever]

i just had to ask before john. :rotflol:



lolz...........

[George C]

What so much fun this was, i wore so much rustoleum doing this but least it's done
Now waiting for everything to get back from powdercoaters

http://i948.photobucket.com/albums/ad325/Quik611/underside_zps3wgygw7v.jpg (http://s948.photobucket.com/user/Quik611/media/underside_zps3wgygw7v.jpg.html)

[PaxtonShelby]

Looks good! Did you brush it on or spray it?

[George C]

Looks good! Did you brush it on or spray it?

all brushed

[Dan B.]

How did you prep it?

[George C]

How did you prep it?

scotch pad for body, scrapers for frame

[THE BIG KOALA]

I didn't ask you the other night but when do you think you'll be finished with it

[George C]

This year at some point hoping

[PaxtonShelby]

What Rustoleum product did you use? I'm going to be cleaning and painting the underside of the Toronado in the near future. How does the stuff you used compare to, say, Eastwood's Chassis Black?

[George C]

Rustoleum industrial

I used regular rustoleum on my jeeps frame and holding for last 2 yrs it's been built

With the amount of driving this truck will see it should last forever but on a true driver I'd look into other products


Will say with a dap method vs strokes it gave a thick level coat

[PaxtonShelby]

Thanks for the info sir!

[thedak]

Def digging this truck

[George C]

Well got most of my stuff back from powdercoaters

i decided to go back to stock spindles to help gain me some ride height back
went ahead and picked up a Qa1 bumpsteer kit
youll also see my dual caliper brackets
going to give belltech leafs a try with my caltracs

and also you see the 14 bolt all powdercoated

yes yes i have alot into powdercoating since this build started

http://i948.photobucket.com/albums/ad325/Quik611/coated%20rear%202_zps6urln6xw.jpg (http://s948.photobucket.com/user/Quik611/media/coated%20rear%202_zps6urln6xw.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/coated%20rear_zpsjk6zvzl9.jpg (http://s948.photobucket.com/user/Quik611/media/coated%20rear_zpsjk6zvzl9.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/belltech%20leafs_zpsbh0jx3n0.jpg (http://s948.photobucket.com/user/Quik611/media/belltech%20leafs_zpsbh0jx3n0.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/coated%20parts_zps5krc8nmr.jpg (http://s948.photobucket.com/user/Quik611/media/coated%20parts_zps5krc8nmr.jpg.html)

[George C]

rear is back together and in the truck topped off with a dual caliper setup

http://i948.photobucket.com/albums/ad325/Quik611/dual%20caliper_zpsvmqoqxuf.jpg (http://s948.photobucket.com/user/Quik611/media/dual%20caliper_zpsvmqoqxuf.jpg.html)

[George C]

I tossed on stock spindles to get my ride height back in order, decided to weigh the belltech vs stock and i was shocked. The belltech lowering spindle weighs in at 22lbs and the stocker weighs in at 15lbs
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/stock%20spindles_zpsmzirbcab.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/stock%20spindles_zpsmzirbcab.jpg.html)


tossed on my QA1 bumpsteer kit, this kit is for a 2005+ mustang. It required very minimal reaming of the spindle
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/bumpsteer2_zpslcecwckm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/bumpsteer2_zpslcecwckm.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/bumpsteer_zpscklgbygz.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/bumpsteer_zpscklgbygz.jpg.html)

also in those 2 pics you can see the AFCO shocks, if you look at top of shock youll see the rebound adjuster, and if you look under the control arm youll see the compression adjuster


with going back to stock spindle it raised the truck up 2" in front. I know have 2.25" fender height difference between front and rear
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/ride%20height%202_zps1elyqz9i.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/ride%20height%202_zps1elyqz9i.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/ride%20height_zpsjmsgyoml.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/ride%20height_zpsjmsgyoml.jpg.html)

and truck will hit the bump stops before it will the bed will hit the tires

and went ahead and painted the rear calipers

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/painted%20caliper_zpso4c6petb.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/painted%20caliper_zpso4c6petb.jpg.html)

[Ares]

Wow that is nuts the weight difference in the spindles.

[GOT SVT]

coming along nicely

I heard your name mentioned with the group from Pittsburgh doing the hot rod drag week, are you going?

[George C]

im not doing drag week

[Dan B.]

I'm brainstorming for drag week. Id love to do it!!

[somethingclever]

drag week - for as close to a real street car as you can get.


Great work George, very professional looking build.

[1320goat]

Drag week would be awesome. I chatted with Jeff Lutz for about an hour at PRP about it. It's too bad I don't own a car that would even come close to competing

[Dan B.]

Drag week would be awesome. I chatted with Jeff Lutz for about an hour at PRP about it. It's too bad I don't own a car that would even come close to competing

I don't have anything that would compete but a week of road tripping and racing would be awesome.

[Tom]

I don't have anything that would compete but a week of road tripping and racing would be awesome.

if we build the fieanger, it would win*


*it would scare everyone away so that we would win by default

[George C]

with trying to eliminate some gauge pods i had from the previous build, i went ahead and stuffed my trans gauge into the stock cluster

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/cluster_zpsozl3hrpz.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/cluster_zpsozl3hrpz.jpg.html)

[George C]

got around to mounting my chute handle

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/chute%20handle_zps8hlwtcu3.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/chute%20handle_zps8hlwtcu3.jpg.html)

[George C]

Now with getting the diff cover back from the powdercoaters I was able to go ahead and put the rear back together for good. Rear has a tru-trac and now 342 gears, would like a steeper gear but only have choices of 342 or 373 and i needed around a 360 gear. the 373 would be too much for the mph goals

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rear%20end_zpshjwwbgnb.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rear%20end_zpshjwwbgnb.jpg.html)

[Dan B.]

I'm not gear limited. I'm track limited. It's not long enough for my mph goals. ;)

[George C]

I'm not gear limited. I'm track limited. It's not long enough for my mph goals. ;)

Do a LS swap and youll have enough power then to meet your goals

[George C]

With having such a small Rad i was limited to fans that would fit....found out i could use the AC fan from a GTO dual fan setup

On high this fan moves some serious air

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/efan_zpsojxctwhs.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/efan_zpsojxctwhs.jpg.html)


Got around to making my fuel regulator mount

Now time to drop it off at powdercoaters

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/regulator%20mount%202_zps4fjtpzgf.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/regulator%20mount%202_zps4fjtpzgf.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/regulator%20mount%203_zpsy5ewrbi5.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/regulator%20mount%203_zpsy5ewrbi5.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/regulator%20mount_zpsci6zsbc1.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/regulator%20mount_zpsci6zsbc1.jpg.html)

[George C]

worked on my coolant crossover

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coolant%20crossover%202_zpsuxs3ynp3.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coolant%20crossover%202_zpsuxs3ynp3.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coolant%20crossover_zpsn9quxlww.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coolant%20crossover_zpsn9quxlww.jpg.html)

spent around 5 hours today opening up my intake to match my heads, with my heads having such a huge port i had to open up the intake a 1/4"..another thing about this intake is the ports werent even true

pic of intake and heads
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/holley%20port%202_zpsr06io2zs.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/holley%20port%202_zpsr06io2zs.jpg.html)
pic of work in progress
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/holley%20port_zpsacdb5ufm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/holley%20port_zpsacdb5ufm.jpg.html)
pic of one side just about finished
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/holley%20port%203_zpsr4ai88s1.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/holley%20port%203_zpsr4ai88s1.jpg.html)
stock port
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/holley%20port%205_zpsyb8mnxyj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/holley%20port%205_zpsyb8mnxyj.jpg.html)
opened up port
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/holley%20port%204_zpsd2vxtlru.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/holley%20port%204_zpsd2vxtlru.jpg.html)

[George C]

My oil cooler parts have showed up, this setup should easily keep oil temps inline along with help keep motor cooler over all

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/oil%20cooler%203_zpswhxonxsg.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/oil%20cooler%203_zpswhxonxsg.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/oil%20cooler%204_zpsonuzm5cd.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/oil%20cooler%204_zpsonuzm5cd.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/oil%20cooler%202_zpsscwzxkoy.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/oil%20cooler%202_zpsscwzxkoy.jpg.html)

[Dan B.]

What's your take on an oil cooler for n/a street motors? My 387w is 11:1 CR, all iron block and heads and in a tight ranger engine bay. Water temps do well (165) when moving but creep to 200 in traffic and occasionally higher when it's humid. To be honest, I've never idled it for extended periods in high heat/high humidity traffic to see how high it would go.

[George C]

Would help keep overall motor temps down

[George C]

well from my 6spd days to now my auto days, the console mod FTW

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/shifter%20mod%202_zpsjirn87l3.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/shifter%20mod%202_zpsjirn87l3.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/shifter%20mod%203_zpsiswyromr.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/shifter%20mod%203_zpsiswyromr.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/shifter%20mod_zpsyoexzjax.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/shifter%20mod_zpsyoexzjax.jpg.html)

[Silverhatch]

Everything looks really clean. Nice work. More patience than me.

[George C]

i picked up GM factory black coated brake lines hoping i could make them work with all the changes Ive made to the truck. My biggest fear was placement of master cylinder along with the driverside downpipe. As you can see the factory lines worked out very well for the wilwood master and clears the downpipe just fine


http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/brake%20lines_zps89djqrtq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/brake%20lines_zps89djqrtq.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/brake%20lines%202_zps7np8glyu.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/brake%20lines%202_zps7np8glyu.jpg.html)

[George C]

Went ahead and picked up a leash fuse/relay board to help wire this project

[AdamantiumSilvr]

It was nice chatting with you guys tonight! I don't get on here as much as I should and definitely don't know how I missed this thread but daaang yunz always do top notch looking work!!

[TooFast98Cobra]

Bump any updates ? Great build.

[George C]

in process of doing the brake lines for the rear and had to order the dual caliper lines

waiting on few small parts to get back from powdercoaters so can mount the fuel regulator and the rad hoses

gonna try tackle wiring this week

[Dan B.]

Are you starting from scratch with ALL the wiring or just the driveline wiring?

[George C]

Are you starting from scratch with ALL the wiring or just the driveline wiring?

redoing all the wiring since ive deleted alot of items and i dont need the extra weight

[Dan B.]

I like the sound of that. Please post pics.

[George C]

Without having the ebrake mechanism anymore it left me a open area with 3 studs, I went ahead and made good use of this by making a plate to mount the leash fuse/relay panel to...this location also gives me good access incase i need to change a fuse

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/leash%20panel_zpslpcc5p6u.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/leash%20panel_zpslpcc5p6u.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/least%20panel%202_zpsv28vgfoq.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/least%20panel%202_zpsv28vgfoq.jpg.html)

with the whole theme of wires tucked and easier to work on, I chose to mount the pcm, injector driver and the 58x box inside the console
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/pcm%20console_zpsykmewdms.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/pcm%20console_zpsykmewdms.jpg.html)

the pcm wires will exit slightly in front of the pcm and into the engine by from behind the motor for a nice clean appearance

[George C]

made a set of rad hoses for the truck from 1.5 and 1.75 aluminum tubing then had them powdercoated black, was also able to score a GM 18psi rad cap

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rad%20hose_zpsb9gorjmg.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rad%20hose_zpsb9gorjmg.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rad%20hose%203_zpss217zxdp.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rad%20hose%203_zpss217zxdp.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/rad%20hose%202_zpsl8ksguc9.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/rad%20hose%202_zpsl8ksguc9.jpg.html)


I chose to go ahead and coat the base of the fuel regulator black and also had the bracket i had made coated as well
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/black%20regulator_zpsxdbwhrlz.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/black%20regulator_zpsxdbwhrlz.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/black%20regulator%202_zps0ox4hwcj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/black%20regulator%202_zps0ox4hwcj.jpg.html)

and with rewiring the entire truck i chose to pick up 125' of Teraflex 1/8-1/4-1/2-3/4 and 1" this should cover me for all the exposed wiring

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/teraflex_zpsyycrzjcs.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/teraflex_zpsyycrzjcs.jpg.html)

[George C]

picked up a billet 3 bar map sensor bracket, nice thing about this is it uses a npt thread so you can screw in AN line to connect your map sensor.. It does use a O ring so no chance of blowing off or leaks

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/map%20block%205_zps1uknosha.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/map%20block%205_zps1uknosha.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/map%20block%204_zps1vlahuuz.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/map%20block%204_zps1vlahuuz.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/map%20block%203_zpsfx4fi7u0.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/map%20block%203_zpsfx4fi7u0.jpg.html)
[URL=http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/map%20block_zpssuujsorl.jpg.html]http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/map%20block_zpssuujsorl.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/map%20block%202_zpsznh6lz5b.jpg.html)

and picked up a fore vacuum block

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fore%20block_zpsiahizjnm.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fore%20block_zpsiahizjnm.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fore%20block%202_zpsgdt9ly3i.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fore%20block%202_zpsgdt9ly3i.jpg.html)


these two items will be mounted inside the cab

[somethingclever]

couple bucks here and a couple bucks there.....

[sutyak]

couple bucks here and a couple bucks there.....

It doesn't count if you don't add it up! At least that's what I tell myself.

[George C]

couple bucks here and a couple bucks there.....

these projects have alot of little add ups that total into big money

[George C]

with having the fuel cell under the bed and the filler door in the bed floor this left a open with the stock fuel door. I didnt have it shaved as I had planned to place the on/off switch in this location...I then came across this pretty cool piece, now I have a very clean location and easily accessible for charging terminals...This was picked up from innovative racecraft

nice thing as it comes with leads that connect to your battery charger

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/charging%20panel_zps572ja216.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/charging%20panel_zps572ja216.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/charging%20panel%202_zpsovbsaoym.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/charging%20panel%202_zpsovbsaoym.jpg.html)

[PaxtonShelby]

That's very cool.

[AdamantiumSilvr]

If I would ever do a LS swap yunz guys would be the only people on earth I would want to do it!! lol Looks totally amazing, seriously awesome work!

[George C]

Thank you

[George C]

PA street trucks need that heat...so we have some -10 black braided heater hoses

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/heater%20hose_zpsqm9byjqk.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/heater%20hose_zpsqm9byjqk.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/heater%20hose%202_zpsthd7tydr.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/heater%20hose%202_zpsthd7tydr.jpg.html)

[George C]

Ppl have asked where my coils were this time around, Gm provided some nice mounting bosses on oil pan and block to attach the stock brackets to

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coils%20mounted_zpsdzzdbzkr.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coils%20mounted_zpsdzzdbzkr.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coils%20mounted%202_zpspcgvbgtv.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coils%20mounted%202_zpspcgvbgtv.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coils%20mounted%203_zps7e9d5meu.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coils%20mounted%203_zps7e9d5meu.jpg.html)

[George C]

With having minimized wiring and distribution blocks on this truck it freed up alot of open areas....this area i chose to mount my old LPE 2 step
{yes i know my cover has saw better days}

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/2%20step_zps10hnufak.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/2%20step_zps10hnufak.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/2%20step%202_zpsqecfps6j.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/2%20step%202_zpsqecfps6j.jpg.html)

[rrjjpp74]

Very nice and detailed build. When you hoping for it to be on the street/track?

[George C]

wont be on track till 2016 but hoping to fire by dec

[George C]

since it was such a nice daily earlier, I decided to roll Cocaine outside to do some garage cleaning...With the sun being out I figured take a few pics of it

So far im very happy with how the manual steering worked out today, very little effort while maneuvering truck down and back

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/stance%2013_zpsoiohygcx.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/stance%2013_zpsoiohygcx.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/stance%2012_zps7qksbtpa.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/stance%2012_zps7qksbtpa.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Stance%2011_zpsqhtiju44.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Stance%2011_zpsqhtiju44.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/stance%209_zpshzr8lzzl.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/stance%209_zpshzr8lzzl.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/stance%2010_zpsyt9yueey.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/stance%2010_zpsyt9yueey.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/stance%206_zps9v9eugxj.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/stance%206_zps9v9eugxj.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/stance_zpsqtqlinzs.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/stance_zpsqtqlinzs.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Frontal_zpsvdsk3xk5.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Frontal_zpsvdsk3xk5.jpg.html)

[black 94]

Truck looks sharp. Ive been following this build very well done. Nice work. Looking forward to seeing this one out for sure.

[TooFast98Cobra]

U push it back up the driveway ? I'm curious . Looks great !!

[George C]

Tractor got it up driveway and into garage

[John4cam]

That is some real art there. Awesome job.

[George C]

Thank you for kind words

[SixSpeedSS]

Looks good George. How you been?

I thought you had a Lightning?

[George C]

Still have the lightning

Just been busy trying to finish this turd, how bout yourself

[SixSpeedSS]

Still have the lightning

Just been busy trying to finish this turd, how bout yourself

My kid plays tournament baseball, basketball, and now football so we spend alot of time with that. Been busy working on other peoples stuff, so I haven't touched my GTO or Truck other than routine maint. My 4x4 'poopy' truck gets more love, because it needs it.

[George C]

Ya im trying to get my projects wrapped up before my daughter becomes old enough for activities

[George C]

Been at this whole new motor harness for some days now, im not finished yet but have made some progress


http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Relocated%20pcm_zpsmaymbzof.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Relocated%20pcm_zpsmaymbzof.jpg.html)

[George C]

alright latest progress has been slow for pics since wiring takes so much time

i was able to finish the wiring for the PCM relocation

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Pcm%20finished%202_zps69v72hpe.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Pcm%20finished%202_zps69v72hpe.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/pcm%20finished_zpsg84eaqcv.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/pcm%20finished_zpsg84eaqcv.jpg.html)


next project is im tackling the main harness for the truck. Since I dont need much of the original harness and looking to cut weight where ever I can, Ive been going thru eliminating things...First thing I ditched was the BCM

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Bcm%20bye%20bye_zps3j5bzbft.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Bcm%20bye%20bye_zps3j5bzbft.jpg.html)

[George C]

Was able to make the Cluster work with no BCM, I still have to land some of the sensors but its powered up...I forgot how many miles were once on this truck

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Cluster%20works_zpsh60wukfz.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Cluster%20works_zpsh60wukfz.jpg.html)

a race truck needs what a race truck needs, since my HVAC system is bare bones these days and only consists of Defrost I decided to go ahead and ditch the HVAC panel and just use a single on/off switch to use as Defrost with the blower on high.. For the amount of time Ill actually need the defroster this will work out well
I chose to place the panel where the HVAC controls were as its the exact size and easy access {if youre wondering where the 1 switch is, Moroso forgot to package it}

also if you look closely youll see where my map sensor is now mounted

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/switch%20panel%202_zpsriyl6x6r.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/switch%20panel%202_zpsriyl6x6r.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/switch%20panel_zps2kax1am0.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/switch%20panel_zps2kax1am0.jpg.html)

[George C]

since I ditched the BCM Ive been working on rewiring this entire truck to make it more simplified. I went thru the entire frontend harness and eliminated anything I didnt need any more then wrapped it all with Teraflex

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/new%20front%20end%20harness_zpsqpabcsqu.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/new%20front%20end%20harness_zpsqpabcsqu.jpg.html)

also with no BCM I didnt have use for the DRL so I ditched that socket and wired in a another parking/turn signal....By doing this my lights are now like that of a GMT400

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/new%20front%20end%20harness%20lights_zpssdi1fvkl.j pg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/new%20front%20end%20harness%20lights_zpssdi1fvkl.j pg.html)

[George C]

Was able to get half the fuel lines ran
-10 feed
-10 return

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20lines_zpspwxppadh.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20lines_zpspwxppadh.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20lines%202_zpsqtz1tsx0.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20lines%202_zpsqtz1tsx0.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20lines%204_zpsaj3rob8t.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20lines%204_zpsaj3rob8t.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20lines%203_zps14lvasz8.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20lines%203_zps14lvasz8.jpg.html)

[George C]

Havent had much to update since completely rewiring a vehicle takes some time, I have around 6 weeks into this job. Ive lost around 30lbs or so from the wiring not used and the stock fuse/relay panels.

I was able to use the Leash to control everything I needed: Radio, power mirrors, power locks, power windows, Ignition, outside temp/compass mirror, hazards, turn signals, low beams, high beams, brake lights, reverse lights, parking lights, horn and of course the motor

heres a few pics no street truck is complete without a double din radio and working mirror
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Mirror%20working_zpsug4yiszx.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Mirror%20working_zpsug4yiszx.jpg.html)

heres the leash panel majority wired just now need to add the extras, then wrap the wires with teraflex
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/least%20panel%20wired_zps5npszca0.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/least%20panel%20wired_zps5npszca0.jpg.html)

i cut apart the stock HVAC panel and attached the switch panel to the bezel of the stock panel. This allows the new panel to bolt in place
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/Switch%20panel%20installed_zpsl2yk77cv.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/Switch%20panel%20installed_zpsl2yk77cv.jpg.html)

[Dan B.]

Wish I had 1/4 of your wiring skills. Awesome build.

[somethingclever]

very professional looking George....

[George C]

Some more pieces of this expensive puzzle
-12 fuel line
-8 oil cooler line
-4 for vacuum lines
2 huge ass fluid coolers 14.5x10.5x1.5 with 900cfm fan
This will put me 1 step closer to fire up

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/AN%20stuff_zpsmghjmqky.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/AN%20stuff_zpsmghjmqky.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/AN%20stuff%202_zpsygxsvzbr.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/AN%20stuff%202_zpsygxsvzbr.jpg.html)

[George C]

Coolers mounted, nice thing about these are they have built in Tstats to control when fans kick on and off

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/coolers%20mounted_zpsicnz1bzd.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/coolers%20mounted_zpsicnz1bzd.jpg.html)

[George C]

some have asked about how the rear looks with my cell mounted, heres a pic of it.. I had to edit the photo some to make the cell stand out some

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/fuel%20cell%20ass_zpsnbh4umbr.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/fuel%20cell%20ass_zpsnbh4umbr.jpg.html)

heres what my interior looks after being dyed, Waiting on my dash pad to be dyed still

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/window%20net_zpshhw0ocfu.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/window%20net_zpshhw0ocfu.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/window%20net%202_zps87rvf7kd.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/window%20net%202_zps87rvf7kd.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/interior%202_zpspvu18rib.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/interior%202_zpspvu18rib.jpg.html)

this pic you can see the moroso switch panel looks right at home in the dash...No trimming of bezel
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/interior%205_zpsbmgfkw7k.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/interior%205_zpsbmgfkw7k.jpg.html)

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/interior_zpssxhmydat.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/interior_zpssxhmydat.jpg.html)

these 2 pics you can see how the A pillar and door bars are with the kick panels
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/interior%204_zpskaqnrbrd.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/interior%204_zpskaqnrbrd.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/interior%203_zps524aaaqr.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/interior%203_zps524aaaqr.jpg.html)

[2000GT]

I am not a Chevy fan at all but that is one bad as truck! Very nice workmanship.

Sent from my SAMSUNG-SM-G900A using Tapatalk

[George C]

Thanks and sorry about your pain....

[2000GT]

No pain here!

Sent from my SAMSUNG-SM-G900A using Tapatalk

[George C]

Theres pain in the eyes being so blinded by the oval......both ford and chevy have their greats and their worsts

Best ford requires a chevy trans to get down track
Best chevy requires a ford rear to get down track

[Fast Gypsy]

Tou-che.

[George C]

on the home stretch of things to finish up on this build, I can now check off routing of the chute cable
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/chute%20cable_zpsqalt5zw7.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/chute%20cable_zpsqalt5zw7.jpg.html)

[Tom]

What size tires are you running on the rear? They look really good on there.

[George C]

315/60 radials

[George C]

contacted a guy on the forums to build me a custom pod to place 4 gauges in my center console since I ditched the pillar pod

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/guage%20pod%202_zpssdlsgynk.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/guage%20pod%202_zpssdlsgynk.jpg.html)
http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/guage%20pod_zpshgbqwzay.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/guage%20pod_zpshgbqwzay.jpg.html)



and with my interior being back in truck and all cleaned up I couldnt wait to be able to do this, Heres a pic of my 8month old angel Allie

http://i948.photobucket.com/albums/ad325/Quik611/Project%20cocaine/allie_zps6oscoily.jpg (http://s948.photobucket.com/user/Quik611/media/Project%20cocaine/allie_zps6oscoily.jpg.html)

[PaxtonShelby]

Great pic!! Best mod yet!!

[George C]

what many have been waiting on, this was fire up, shes a little rich and needs more air flow and timing but it runs and we have steady 60psi at idle



https://www.youtube.com/watch?v=B5QisHcMHyo&feature=youtu.be

[07v6vistablue]

Sounds Great!

[George C]

worked on the tune some it now revs quickly & clean

https://www.youtube.com/watch?v=DDyUU-ZbWbc&feature=youtu.be

[rrjjpp74]

Bet a good feel of accomplishment after all this time to finally hear it fire!

[George C]

been chasing a few bugs and found out i had 4 injectors not firing, come to find out i had pins pushed in on my pcm

so heres the latest and best idling video

these are billet atomizer 225 injectors idling at stoich on stock PCM

https://www.youtube.com/watch?v=kLc67mPoftQ&feature=youtu.be

[George C]

been chasing a few bugs and found out i had 4 injectors not firing, come to find out i had pins pushed in on my pcm

so heres the latest and best idling video

these are billet atomizer 225 injectors idling at stoich on stock PCM

https://www.youtube.com/watch?v=kLc67mPoftQ&feature=youtu.be