fender roller

[silvernotch]

anyone have one I can borrow or rent?

[juice_man_86]

Rodeheavers Hotrod has one


Sent from my iPhone using Tapatalk

[Silverhatch]

Cut em.

[TooFast98Cobra]

I have one . Lent it out and havent seen it since. Ill try texting the guy. Use a wooden bat.

[Dfabs]

I called Rodeheaver's about getting the fenders rolled on my T/A and they told me they don't roll fenders. Does anybody know somebody that rolls fenders? I'm going to have to get mine done this summer before I paint my car.

[PaxtonShelby]

Tim rolled mine - about 10 years ago though.

[Prok]

There was one on cl for rent greensburgh area

[Prok]

https://pittsburgh.craigslist.org/tls/d/fender-roller-kit-for-rent/6386342079.html

[SlowSix]

https://pittsburgh.craigslist.org/tls/d/fender-roller-kit-for-rent/6386342079.html

That is actually a good friend of mine, Roy. Good dude.

[SlowSix]

Tim rolled mine - about 10 years ago though.

He has the roller but I don't think they like to do it. If you crack the paint then you're screwed.

I had Ryan at Hoffman auto body roll mine, but he was doing some other paint work for me at the time.

[Viper_ed]

PureStock on here had one he used to rent out.

Sent from my SM-G935V using Tapatalk

[Donstang86]

He has the roller but I don't think they like to do it. If you crack the paint then you're screwed.

I had Ryan at Hoffman auto body roll mine, but he was doing some other paint work for me at the time.

I did my 1986 Mustang. Position the Eastwood roller. Take a blow drier and heat up the area but dont burn the paint. Just keep going back and forth until its nice and warm. While the lip is still warm, roll it. I have very little skill and I did this easily. The paint did not crack and it looked fine!

[Donstang86]

Orientation of the tool. Make sure the lug nuts are tight before you roll.

[black 94]

U can pick a knock off one up from ebay super cheap. Probly about as much as it would cost to rent one and they look identical to the Eastwood one.

[black 94]

https://www.ebay.com/p/Roll-Fender-Reforming-Extending-Tool-Wheel-Arch-Roller-Flaring-Former-Heavy-Duty/840106858?iid=282459758318&rt=nc

[SlowSix]

I did my 1986 Mustang. Position the Eastwood roller. Take a blow drier and heat up the area but dont burn the paint. Just keep going back and forth until its nice and warm. While the lip is still warm, roll it. I have very little skill and I did this easily. The paint did not crack and it looked fine!

Idk about the foxes, but the sn95 car rear lips are doubled sheet metal and pretty hard to roll

[PaxtonShelby]

My '66 was a real bear to roll - old school sheet metal.

[wick]

I have one. I bought it to do my Monte.

[Terminated]

Bump. I need to massage the rear lips on my car after sticking 295s under it. They don't need to go far, just enough to not cut my tires.

[silvernotch]

Wick