5-lug FOX Rotors

[coralcoupe1993]

What do you guys and girls think about these? Easier than looking through junk yards and ebay...
http://store.summitracing.com/partdetail.asp?autofilter=1&part=FMS%2DM%2D1102%2DC&N=700+4294908331+115&autoview=sku

[One Sweet Day]

What do you guys and girls think about these? Easier than looking through junk yards and ebay...
http://store.summitracing.com/partdetail.asp?autofilter=1&part=FMS%2DM%2D1102%2DC&N=700+4294908331+115&autoview=sku


:cutie: :goodidea: :p

[White5.0]

i have those but didnt put them on yet...got them for $95 brand new on ebay:woot1:

[Ares]

Wish I could use those on my '84 but I would still need 87-93 v8 spindles

[White5.0]

Wish I could use those on my '84 but I would still need 87-93 v8 spindles


i have a set of spindles if you're interested...

[wick]

Hell no!!!!!!!!!!!!! 25.00 each at NAPA. I thought I told you that yesterday.

[wick]

Wish I could use those on my '84 but I would still need 87-93 v8 spindles


I have some, real cheap!!!

[coralcoupe1993]

I have some, real cheap!!!

Will my 5-lug 00 GT wheels work with them?

[INSANELY CRAZY]

yea.. get licoln rotors from napa

[wick]

Will my 5-lug 00 GT wheels work with them?

What kind of center cap? Like mine? If so then no. If its a larger cap they might work.

[J-rod]

colin might work....but i dunno

this is from sn95brakes.com



**Important note here! The SVO/Lincoln front rotors will NOT work with the Ford '98 & '99+ Cobra, Y2K Cobra R wheels, and '97+ GT 17" wheels

[coralcoupe1993]

So, the ones from summit should have smaller hubs????

[itow]

I did a 5 lug swap on an older GT I had (I think an 87, but its been a while, like 10 years ago) and I think I used 2wd ranger rotors??

[White5.0]

So, the ones from summit should have smaller hubs????


i have 03 cobra wheels and those rotors but they arent on yet. i put the rotor on behind the wheel and it fits with no problem, center cap stays on fine...im not sure but im guessing it will be different once the rotor is actually on the car??

[J-rod]

So, the ones from summit should have smaller hubs????


id like to know that as well....also heard you can shave some off of the lincoln rotors and make it fit the wheels.

for $170 though i think id go the spindle swap route and get better brakes.

[Martin0660]

The lincoln rotors are the same as the SVO rotors, and are a PITA with wheel selection. Inless you are running something like a Weld wheel with a big cap, or the waffle stars, they interfere with most others. Some have flattend the dust cover to the spindle and got some other wheels to git, some with the same wheels havent. Its a little hit or miss.

Bob Myers

[Carbed89Lx]

I have an 89 notch and im getting 89 cougar front rotors, was told its a cheap way to do a 5 lug conversion up front.

[N8Miller]

if you want a set of 5 lug rotors, PM me, i am prolly gonna switch to cross drilled, and i can get ya all 4 for about that price....

[J-rod]

anyone ever confirm if these allow other rims? as opposed to the lincoln rotors?