Dial indicator, degree wheel, valve spring tool

[Pure Stock]

Wanting to do some cam swapping. In need of a dial indicator, camshaft degree wheel and a valve spring removal tool. If anybody has one or more of these items and can lend them out for a short time let me know.:goodidea:

[Viper_ed]

I have the valve spring tool and a dial indicator (If I can find it) if you need it.

[SonofaBish]

I have a valve spring compressor as well... you're more than welcome to use it... i won't be needing it again anytime soon, i HOPE
Ray (stangman) and i found out that its a very nice tool, compared to some others out there...

[Pure Stock]

I have the valve spring tool and a dial indicator (If I can find it) if you need it.

Let me know about the dial indicator. I definitely need it to gauge the clearance of P-V. The valve spring tool you mention having, is this the tool that will remove the springs with the cylinder head on the block?

[Pure Stock]

I have a valve spring compressor as well... you're more than welcome to use it... i won't be needing it again anytime soon, i HOPE
Ray (stangman) and i found out that its a very nice tool, compared to some others out there...

Great. I want to see what Ed has to say about the one he owns. We are in very close proximity to each other. If there are complications, I'll be in contact with you for your offer. Thank you.

[Viper_ed]

Let me know about the dial indicator. I definitely need it to gauge the clearance of P-V. The valve spring tool you mention having, is this the tool that will remove the springs with the cylinder head on the block?

If you're not pulling the head, you can hook an air line to the sparkplug hole to keep the valve in place.

How soon you need these? I'll have to go to my Dad's to get them.

[Pure Stock]

If you're not pulling the head, you can hook an air line to the sparkplug hole to keep the valve in place.

How soon you need these? I'll have to go to my Dad's to get them.

For the weekend.

[Viper_ed]

For the weekend.

OK, I'll have them at my house by Saturday morning.

[SonofaBish]

If you're not pulling the head, you can hook an air line to the sparkplug hole to keep the valve in place.

How soon you need these? I'll have to go to my Dad's to get them.

or you can just put that piston to TDC and then the valve won't fall down in ... just a thought, b/c that's what i did

[Viper_ed]

or you can just put that piston to TDC and then the valve won't fall down in ... just a thought, b/c that's what i did

That works too! :goodidea:

[wick]

Another way we do a cam and spring swap is to put a length of 1/4" nylon rope into the cylinder, if air is not available. Roll the motor up by hand. The springs are gaurenteed not to fall out!! I have done this many times.:goodidea:

[Rodeheaver's]

Another way we do a cam and spring swap is to put a length of 1/4" nylon rope into the cylinder, if air is not available. Roll the motor up by hand. The springs are gaurenteed not to fall out!! I have done this many times.:goodidea:
this method is pretty fool proof, have used it myself

[wick]

this method is pretty fool proof, have used it myself


HAHA Your right!!:goodidea:

[351SVT]

Cam swap=Bowling green=Road trip! :Devious: