Caster Camber ETC

[coralcoupe1993]

How low can I go on my 95 GT before I need to get Caster/Camber plates or anything else?

[yeahloh95]

1.5" Or So

[J-rod]

general rule i have always heard and used is 1.5"

[coralcoupe1993]

So I would be safe with some FMS C springs???

[wick]

Yep, or cut 1 coil off yours.

[coralcoupe1993]

Just baught some 2" lowering springs....... Guess I need the plates now.

[coralcoupe1993]

Does anyone think I can get away with just putting the springs in and having it aligned?

[fork5o]

its depends how much you drive it. i got sportlines but i dont drive it too much so im not worried about the tires wearin out. if you gonna drive it alot def get the caster plates cause it just doesnt align right without them

[Smallville]

I dropped my cobra about 1 1/4" and realized you get almost NO adjustment from the factory plates. I always thought you could drop it 1 1/2" up front and get enough out of the plates to be OK. Guess NOT!

[383taman]

You seen it.



I dropped my cobra about 1 1/4" and realized you get almost NO adjustment from the factory plates. I always thought you could drop it 1 1/2" up front and get enough out of the plates to be OK. Guess NOT!

[bspilner]

need cc plates and off set rack bushings to do it right

[383taman]

Need a bump steer kit for 2inches rack kit only corrrects a 1inch and a quarter


need cc plates and off set rack bushings to do it right

[Smallville]

which reminds me,,,,, When are we gonna FIX MINE MIKEY?????????:biglaugh:

[383taman]

Knew that was coming. lol call and make appoitment. lmao J/K



which reminds me,,,,, When are we gonna FIX MINE MIKEY?????????:biglaugh:

[Smallville]

Knew that was coming. lol call and make appoitment. lmao J/K


So that's how it is?? :rolleyes: Hows that Cavalier doing up there????????

[bspilner]

i would try a .400 offset rack bushing first then go to a bump steer kit, the offset rack bushings will work better with the bump steer kit.....less spacers=less deflection

[383taman]

Sis will be happy too.:biglaugh:


So that's how it is?? :rolleyes: Hows that Cavalier doing up there????????

[383taman]

Ok we can try that first. Cheap than a bump steer kit.


i would try a .400 offset rack bushing first then go to a bump steer kit, the offset rack bushings will work better with the bump steer kit.....less spacers=less deflection