Upgrading to 10” Drums on a 87-93 Fox

[DRRummel]

I have seen references to upgrading the Mustang’s 9” drum to a truck 10” drum. I now have a set of 10” Ranger brakes from an 8.8 rear and was wondering how the conversion is installed. I would hope it is a direct bolt on conversion. Brake cables and all. But I can’t find any write ups on how to do it. Does anyone have a How To document or link for this upgrade?

[eddmann55]

http://mjbobbitt.home.comcast.net/mustang/4lug.html

[eddmann55]

hope this helps

[DRRummel]

http://mjbobbitt.home.comcast.net/mustang/4lug.htmlMatt's page has been a big help, but it only mentions that the conversion can be done (and that it would be better to go to disc) but not how to do it. I would really like to find a how to article.

[One Sweet Day]

http://www.musclemustangfastfords.com/projectcars/mmfp_0704_project_1993_ford_svt_cobra_wheels_brake s/index.html
may help:rolleyes:

[DRRummel]

http://www.musclemustangfastfords.com/projectcars/mmfp_0704_project_1993_ford_svt_cobra_wheels_brake s/index.html
may help:rolleyes:
That looks like another 4 wheel disc conversion. I was hoping for an article for converting the stock 9 inch drum brakes to 10 inch drum brakes.

[Domination]

take wheels, off. Take old brakes off. Take axles out. remove backing plate. Install new backing plate, Install new brakes, put wheels on.

[DRRummel]

take wheels, off. Take old brakes off. Take axles out. remove backing plate. Install new backing plate, Install new brakes, put wheels on.I was thinking it was that simple, but I wanted to get confirmation. Thanks.

[Domination]

obviously left a couple things out, but its very straight forward.