306 build and swap

[TheGreatWhite]

so im bulding an engine thats goin in the stang.. and i also used this as my senior project so i figured id put the pics on here..anyways its a 302 bored .030 over w/ speed pro forged pistons,forged eagle rods,total seal rings,clevite bearings, the rotating assembly is balanced and the crank was polished. here is what i did so far.. im just waitin on the cam to come and the heads back from the machine shop so i can do the rest.
http://www.pittspeed.com/uploaded/block.bmp
http://www.pittspeed.com/uploaded/bearing%20install.bmp
http://www.pittspeed.com/uploaded/crank%20install.bmp
http://www.pittspeed.com/uploaded/torque.bmp
http://www.pittspeed.com/uploaded/ring%20install1.bmp
http://www.pittspeed.com/uploaded/bearing%20install1.bmp
http://www.pittspeed.com/uploaded/piston%20install.bmp
http://www.pittspeed.com/uploaded/torque1.bmp
http://www.pittspeed.com/uploaded/bottom%20end.bmp
ok so now i got some stuff from summit. i got a Ford Racing E-303 cam which i put in..FRPP roller rockers and FRPP pushrods, and a comp cams double roller timing chain..
http://www.pittspeed.com/uploaded/cam%20install.bmp
http://www.pittspeed.com/uploaded/thingy.bmp
http://www.pittspeed.com/uploaded/timing%20chain.bmp
http://www.pittspeed.com/uploaded/rockers.bmp
so i got the heads back, installed them yesterday, and put the lifters back in
http://www.pittspeed.com/uploaded/head%20install.bmp
http://www.pittspeed.com/uploaded/torque%20heads.bmp
http://www.pittspeed.com/uploaded/spider%20tray.bmp
just installed the rockers/pushrods today.
http://www.pittspeed.com/uploaded/engine%20rockers.bmp
my motor is just about finished. i put on the timing cover, oil pan, and new water pump. i also got some spiffy valve covershttp://www.pittspeed.com/forums/images/smilies/yumyum.gif and an edelbrock performer rpm intake. i just put on an old carb i had laying around and an air cleaner. im probably gonna go with the stock air cleaner with the dual snorkels, and i still have to buy a carb. now its time to paint the engine
http://www.pittspeed.com/uploaded/oilpan.bmp
http://www.pittspeed.com/uploaded/valve%20covers.bmp
http://www.pittspeed.com/uploaded/complete%201.bmp
http://www.pittspeed.com/uploaded/complete%202.bmp
ok so i finally painted my motor..shot the intake with a few coats of clear. engine is painted Ford Blue. now i just gotta get some headers and find enough time to put the damn thing in!
sorry for the shi!$y pic its from my phone
http://www.pittspeed.com/uploaded/done.jpg

[mineralrob]

Very nice. I saw your writeup of this over on pittspeed.:goodidea:

[Stangman701]

Are you building it in your closet? :sticktonge: Looks good. Let us know how she turns out :awsome:

[TheGreatWhite]

Are you building it in your closet? :sticktonge:

haha no no.. these pics are from the winter and i did it in my basement where it was nice and warm but i did it in a back section incase things got messy:dumping::yes: