Terminator Fox update

[SVTGT]

I figured i throw up and update on the project. well its still not running. the PATS went off,:censored: sadly and upsettingly it didnt do it the first time we tried to start it. then i graduated and had to take car home so its sittin in my dads garage waiting for me to figure out exactly how to take care of it. i want to go to a full stand alone engine managment but. its costly and im low on cash. so for now im trying to firure out how to get around this all. if anyone has any idea or thoughs let me know. other than than we made some real good progress. ill have photos up soon. i think youll all like the custom tranny cross member. custom made by my fabricator roommate Aaron Carswell, ill get more pics up soon.
but now im torn on a few other things. im building this for a street legal road race car. should i not use the cobra front seats, get some corbeau's and delete the rears. im stuck in the middle here.
ok let me know what you have to say.:thmbsup:

[5k#Eaton]

sell it and let me know how much you want for it lol

[SVTGT]

help..lol

[SVTGT]

no one would wanna pay what ive got in.

[5k#Eaton]

ok well then Ill buy something else then

[Smallville]

You shouldn't use those cobra seats,, I want them!:bouncy:

As for the PATS, without seeing how it was wired, beings it's "custom". I wouldn't know what to tell ya. Maybe a roadtrip with ya one day to look at it for myself. Do you have access to a MODIS at your dad's?

[SVTGT]

not right now but i know a few people who do. not sure if i can get my hands on one though. lol and i know you want the seats. but corbeaus aint cheap either.

[Smallville]

hm. You friends with any ford techs?

[SVTGT]

i know a few but none around my dads. if got a few more tricks im gonna try while home getting those door panels i knew i printed every wiring diagram for the cobra for a reason.

[SVTGT]

http://i237.photobucket.com/albums/ff62/svtgt/cobra1.jpg



same builders anyone
http://i237.photobucket.com/albums/ff62/svtgt/IMGP1046.jpg

http://i237.photobucket.com/albums/ff62/svtgt/DSCF2567.jpg


http://i237.photobucket.com/albums/ff62/svtgt/IMGP1031.jpg




http://i237.photobucket.com/albums/ff62/svtgt/cobra2.jpg
http://i237.photobucket.com/albums/ff62/svtgt/DSCF2544.jpg



http://i237.photobucket.com/albums/ff62/svtgt/DSCF2568.jpg

http://i237.photobucket.com/albums/ff62/svtgt/DSCF2558.jpghttp://i237.photobucket.com/albums/ff62/svtgt/DSCF2555.jpg

http://i237.photobucket.com/albums/ff62/svtgt/DSCF2554.jpg

[Viper_ed]

Did you do the Driver's Head Cooling Mod before you put it in the car? Also get yourself a good IRS Brace.

[mineralrob]

It's Mineral gray also. Please let me get that wing.lol:hyper:

[Smallville]

I have a few ideas as well. Give me a call when your heading back up there. Maybe I'll come give a hand getting that dash out too:goodidea:

[SVTGT]

ed didnt think about the cooling mod. while we had the time stupid me but im sure itll be out again. and will do on the brace as soon as cash allows. and smallville if all works out the dash should be waiting when i get home. my little cousins pretty good at pullin parts hes still learnin. so it should be waiting. if i know ill have time for other things ill give you a call.

[Smallville]

ed didnt think about the cooling mod. while we had the time stupid me but im sure itll be out again. and will do on the brace as soon as cash allows. and smallville if all works out the dash should be waiting when i get home. my little cousins pretty good at pullin parts hes still learnin. so it should be waiting. if i know ill have time for other things ill give you a call.

niiiiiiiice:goodidea:

[LXguy88]

What the cooling mod for us pushrod guys?

[LXguy88]

http://i241.photobucket.com/albums/ff181/evol302/DSCF2607.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2608.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2609.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2610.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2611.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2612.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2613.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2614.jpg

[Smallville]

WOW, thats alot of work for a trans crossmember. But it came out looking sweeeeeet!:goodidea:

[Smallville]

What the cooling mod for us pushrod guys?

IT links the driver side head to the passenger side head across the back so coolant can escape the drivers head.

[SVTGT]

we didnt have many options for the crossmember the T56 in a fox member doesnt work with a mod motor. so i had my room mate make me one. its damn near indistructable

[SVTGT]

thanks for puttin the pics up harley

[Jivepepper]

Very nice work. I would like to put a termi motor in an AC Cobra kit car.

[LXguy88]

Maybe we forgot to do the cooling mod from my blood loss on the pass. side head. haha

[SVTGT]

no harley we didnt do the cooling mod persay we just bypassed the heater core. and the bloods probably still there.

[LXguy88]

http://i241.photobucket.com/albums/ff181/evol302/DSCF2558.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2562.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2561.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2560.jpg
http://i241.photobucket.com/albums/ff181/evol302/DSCF2572.jpg

[SVTGT]

harley i decided something else to try. to get it to wanna start

[George C]

i want that car when its finished

[SVTGT]

i think theres a line for. that.lol

[LXguy88]

Whats you plan matt. you got alot of pepole that want this thing.

[SVTGT]

ya lotta people do want it. but so do I. and Quik thats a big turbo you got. nice

[weareweird69]

Glad to see some progress is being made here :)

[Chris00GT]

If you call a tuner you can have something like an SCT chip burnt for your car and have PATS disabled. We used to have to bypass PATS everyonce and awhile. The only down did is the theft light will blick all the time.

[SVTGT]

lol not a whole lot of progress just little bits at a time its better than nothing though.