PDA

View Full Version : new rotated intake pic



yeahloh95
10-13-2007, 04:14 PM
i just finshed up my new rotated intake here is a bad pic:thumbsup:

Pure Stock
10-13-2007, 07:11 PM
What is the most difficult part of that mod there?

86-TC/SVO
10-13-2007, 09:46 PM
Making sure that you can still go around the alternator without moving it. You don't want to re-cut the upper apart to re-weld it back together at a different angle. Sometimes people don't get it right the first time.

Looks good !

yeahloh95
10-13-2007, 09:49 PM
The hardest part would be cutting the upper, and then determining how far to rotate it. Then, gutting the upper and port matching it to the new rotated base. Finally, lengthening the TPS and idle air control wires and connecting up the new inner cooler pipe. I hope to gain throttle response and better top end charge from the new intake mods. It is also set up to replace the tiny 50 mm tb. with the 60 mm off my yellow car.

Pure Stock
10-14-2007, 01:01 AM
The hardest part would be cutting the upper, and then determining how far to rotate it. Then, gutting the upper and port matching it to the new rotated base. Finally, lengthening the TPS and idle air control wires and connecting up the new inner cooler pipe. I hope to gain throttle response and better top end charge from the new intake mods. It is also set up to replace the tiny 50 mm tb. with the 60 mm off my yellow car.

Sounds like a lot of work and a tremendous amount of attention to details. Hope it works out for ya Troy.

-Joe

Martin0660
10-14-2007, 10:30 AM
Look's great Troy! Another step done :laughing1:

Joe- You should know, its all about small details. The problem is us 2.3 guys cant "buy" these little details, so we need to make them :D

Bob Myers

yeahloh95
10-14-2007, 01:23 PM
thanks guys,
well after drivin the car a little bit yesterday, it spools up much quicker:yes: , and pulls good up top, i had a problem with the tb gasket and had to replace it, and the dip stcik wasn't fully seated and caused a mess underneath , its all fixed now and i hope to have vid of it later today,

troy

lib88stang
10-14-2007, 09:58 PM
Looks good Troy, I had mine out today alittle and the PCV came out and made a mess too.

Killercanary
10-15-2007, 01:25 AM
Looks good Troy. I should have taken a better pic tonight at the cruise-in but I never thought about it.

stanggrrl
10-19-2007, 08:16 AM
:thmbsup: Awrite Troy! Some zing to go with the bling. Keep this up and it'll outrun a Slobalt. :)

SV1000s
10-19-2007, 08:21 AM
where's the video Troy???? :dunno:

yeahloh95
10-19-2007, 09:39 AM
waiting on paul to post it we made one the other day .

Killercanary
10-19-2007, 11:11 AM
Troy, which video are you refering to? i didn't get any video of your car, only a few pics.

yeahloh95
10-19-2007, 12:21 PM
THE IN CAR ONE :thumbsup:

SV1000s
10-19-2007, 01:15 PM
waiting on paul to post it we made one the other day .


Where's the video Paul...lol :laughing:

coralcoupe1993
10-19-2007, 04:37 PM
Nice Troy. I still want to meet up and check out the rides. You have some cool ones! :awsome:

yeahloh95
10-19-2007, 06:15 PM
we were taping the whole time from the pic spot to the cruise in .:awsome: