car problem help!!!

[chuck94]

make a long story short i bought a stang with some mods that was missing a bit not firing on 2 3 and 5 cylinder so i tore it down it had a blown head gasket between 2 and 3 cylinder and number 5 had a burnt valve so i bought some h.0 heads off 393 rag they looked really good well i put it together all cylinders are good but number 5 is dead plug has no gas smell looks like new i put new plugs wires cap rotor button still number 5 is dead any suggestions? could it be a clogged injector it got 24# in it let me know what i should proceed with gettin ready to tear it back apart soon

[Rodeheaver's]

Check for spark, fuel, compression, if that cyl had a burnt valve before i would check for a wiped lope on the cam in that cyl... Or a vaccum leak on that cyl..

[wick]

Sounds like no fuel.

[chuck94]

gonna pull injectors out here in a little bit any suggestions on how to clean em or if i can?

[chuck94]

i did a compression check on number 5 cylinder it got 150 lbs in the cylinder still dead!!!! any suggestions thanks alot

[wick]

PM returned...

[mhuckabee]

Put a noid light on the number 5 injector plug to make sure the injector is getting its pulse. I had a dead cylinder once caused by a bad connection between the wiring harness and the ECU.

[chuck94]

bought a noid light set has no signal to injector any one have the whole injector harness i can jus change it out?

[mhuckabee]

You could try cleaning the Salt and Pepper connectors. I think I have an injector harness if that doesn't work.

[chuck94]

runs awesome got it fixed wire was melted:pepper:

[wick]

Told ya.

[92306gt]

i said it was either the injector or in the the wiring. damn im good :biglaugh:

[chuck94]

yea u jus had a lucky guess :rofl: