Results 1 to 8 of 8

Thread: 1967 Mercury Marquis - 2 door

  1. #1
    Kickin it Old School somethingclever's Avatar
    Join Date
    Aug 2006
    Location
    Bentleyville
    Posts
    4,625

    1967 Mercury Marquis - 2 door

    1967 Mercury Marquis – 2 door

    Posting for a buddy. Car is located 30 min northwest of Columbus, OH. (3.5 hours from PGH)

    Body: Original Steel, some previous rust repair in front of rear wheels, has some rust bubbles under the vinyl roof, overall I would classify it as a 5-footer

    Frame, suspension, and brakes are very solid

    Interior is black and very nice…bench seat

    Engine, Exhuast, and Ignition:

    416ci FE
    Reworked stock crank and rods with forged pistons (10:1 comp)
    Factory Iron Cobra Jet heads, ported
    Aftermarket HD rocker shaft mounts with HD end supports
    228/236 deg comp cam with .556” lift and matching valve springs
    Edelbrock Performer RPM Intake Manifold
    Edelbrock 750 cfm carb and tuning kit
    Pertronix Pointless Ignition
    Holley Annihilator Digital Ignition w/ soft touch adjustable rev limiter
    Hooker Super Comp Long Tube Headers
    2.5” dual exhaust with the baddest sounding mufflers you’ve ever heard. 

    Tranny and Rearend:

    New TCI C6 with Ford Kickdown
    New 4.11 Richmond gears, fresh 31 spline trac-loc
    Rolling stock consists of OEM Bullitt wheels and 75% new rubber

    Stock cool equipment that still works:
    High beam dimmer
    6 way power split bench seat (driver and passenger side power)

    Stock cool non functioning equipment: but could be fixed easily
    Power Locks (vacuum)
    Remote Trunk Release (vacuum)

    Car has run 14.3 @ 98mph on street tires which isn’t too bad for a 4000lb car and a stock stall convertor.

    As you can imagine this car gets tons of looks and compliments every time he takes it out. Only reason he is selling is because he needs the garage space to redo his 66 F250. The starter just went out in the car (remanned unit, needs new bendix) and that was the last straw. He has a good working original starter to go with the car. It will start, run, and drive anywhere you want it…

    Price is $4,800 OBO (there is more than that in the engine and tranny)

    PM me for his phone number if you are serious. If you like looking at pictures of other people’s cars for sale and you’re not looking to buy, don’t pm me.




    -JOHN

    Carburetors and SAE wrenches.................


    Buy Made in the USA - It Matters.

  2. #2
    Kickin it Old School somethingclever's Avatar
    Join Date
    Aug 2006
    Location
    Bentleyville
    Posts
    4,625
    Also:


    The car has power disc brakes up front with one new caliper.

    The car has power steering.

    The paint is flat black.

    We refer to her as the " 'shine runner ". :D
    -JOHN

    Carburetors and SAE wrenches.................


    Buy Made in the USA - It Matters.

  3. #3
    Kickin it Old School somethingclever's Avatar
    Join Date
    Aug 2006
    Location
    Bentleyville
    Posts
    4,625
    Still available...

    He said the starter is working correctly.

    Get in and go...

    Pretty sure Goodguys is at Columbus this weekend......kill two birds with one stone. :)
    -JOHN

    Carburetors and SAE wrenches.................


    Buy Made in the USA - It Matters.

  4. #4
    Kickin it Old School somethingclever's Avatar
    Join Date
    Aug 2006
    Location
    Bentleyville
    Posts
    4,625
    Ttt...
    -JOHN

    Carburetors and SAE wrenches.................


    Buy Made in the USA - It Matters.

  5. #5
    Kickin it Old School somethingclever's Avatar
    Join Date
    Aug 2006
    Location
    Bentleyville
    Posts
    4,625
    still available...he's thinking of taking it to Woodward if it doesn't sell before then.
    -JOHN

    Carburetors and SAE wrenches.................


    Buy Made in the USA - It Matters.

  6. #6
    Kickin it Old School somethingclever's Avatar
    Join Date
    Aug 2006
    Location
    Bentleyville
    Posts
    4,625
    still for sale....soon to be parted
    -JOHN

    Carburetors and SAE wrenches.................


    Buy Made in the USA - It Matters.

  7. #7
    Kickin it Old School somethingclever's Avatar
    Join Date
    Aug 2006
    Location
    Bentleyville
    Posts
    4,625
    Price lowered on car...$3500.

    This is a great deal for someone looking for an affordable cruiser.

    TONS of good parts.

    Only thing it needs is a starter and you can drive it home.
    -JOHN

    Carburetors and SAE wrenches.................


    Buy Made in the USA - It Matters.

  8. #8
    SCS Addict Stangman701's Avatar
    Join Date
    Aug 2006
    Location
    Robinson Twp.
    Posts
    2,143
    Was just looking at this car again. Wish I had the extra garage space for it. Bump for a hell of a deal.
    2015 Charger Hellcat
    2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET

    85 GT
    Heads and Cam plus other bolt ons

    73 F250
    Lifted, 35's, 460 4spd

    Real name = Ray


Similar Threads

  1. WTB: Crown Vic / Grand Marquis
    By Stroked03Cobra in forum Ford Parts
    Replies: 13
    Last Post: 12-07-2011, 02:12 AM
  2. 1995 merc grand marquis--mint!
    By af_one in forum Ford Vehicles
    Replies: 3
    Last Post: 05-15-2011, 03:00 PM
  3. 1967 mustang radio
    By map351 in forum Ford Parts
    Replies: 0
    Last Post: 03-23-2010, 05:17 PM
  4. Replies: 1
    Last Post: 06-08-2009, 11:28 PM
  5. 96 grand marquis 4.6 Block????
    By Chargin2004GT in forum General Tech
    Replies: 0
    Last Post: 07-10-2008, 10:43 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •