Results 1 to 15 of 15

Thread: Patriot sucks!

  1. #1
    Senior Member Jivepepper's Avatar
    Join Date
    Aug 2007
    Location
    Morgantown WV.
    Posts
    563

    Patriot sucks!

    I made 7 hp more after adding stage 2 Patriots heads and the also added 2* of timing and ran 200 rpms higher. This was a 515 hp supercharged car. They got some of the low rpm cruising miss out at tuners but that is about it. Also I'm sorry I went with the bullets. Head is ringing after the 200 mile trip,


    Saying I'm disappointed is an understatement. I have spent thousands off dollars to ruin what was a nice car.

    F*ck!!!
    665/540 New times coming
    Old times with 516/453 11.10 @129 Best trap 130.69 -750' DA lol
    DYNO VID ---> http://www.youtube.com/watch?v=K9uOS732mdA

  2. #2
    Spoon Killer HidalgoGT's Avatar
    Join Date
    Sep 2006
    Location
    Uniontown
    Posts
    1,792
    Hate to say it but, maybe send them out to fox lake or something and get them ported. Maybe they can massage the flaws out.
    2001 Dodge 2500 The Big Bad "D"
    4" exhaust,38"MTZ's,5.5 Fabtech Lift,Cold air intake,Silencer ring MIA,Smarty tuner,Edge Drag comp, 64/71/.80 s300 turbo 175hp injectors.
    321Hp/783Tq New power numbers this spring.
    1987 Dodge 1/2 ton gasser 4x4 "jr"
    Ricers: For those who don't have the balls or skills to drive American Muscle.
    Not cool cause I don't drive a mustang anymore.
    Got Smoke?
    http://www.youtube.com/watch?v=BGIvJflAxZU

  3. #3
    Slow Vehicles Team SonofaBish's Avatar
    Join Date
    Aug 2006
    Location
    Spencerport, NY
    Posts
    3,762
    WOW, sorry to hear man! Us GM guys have done great with Patriot, but i've definitely heard some good and bad about them among the Ford crew...
    2015 Corvette Z06
    - Shark Grey / Kalahari
    - bolt-ons, tune, lots of carbon fiber (642/671 rwhp/tq)

  4. #4
    Right Wing Nut Dragger Troll's Avatar
    Join Date
    Aug 2006
    Posts
    5,822
    that sucks, dude. sorry to hear that. Did Dave Guy have any suggestions?
    2019 Colorado ZR2


  5. #5
    far from a newb!!! INSANELY CRAZY's Avatar
    Join Date
    Aug 2006
    Location
    out in the woods
    Posts
    4,948
    man that really sux.. 7hp eh? really wow..
    ridin fast,hittin da hills,throwin some dirt

    2003 polaris predator 500

    (wanna ride,just pm me!!!)

  6. #6
    Senior Member TJH64's Avatar
    Join Date
    Apr 2007
    Location
    Delmont PA
    Posts
    320
    There is nothing more frustrating than to invest time, effort and money only to realize minimal gains on a mod. I feel for ya, man.

    Was there a difference in peak boost pressure with the new heads?

    Fordstrokers 347 4.030 bore, 3.400 stroke, 5.315 rod, 10.6:1CR
    Canfield 195 heads, Ferrea 6000 valves, Comp springs, Ti retainers, roller rockers, hand bowl blended
    Camshaft Innovations custom billet core hydraulic roller camshaft
    TFS Track Heat, 75mm TB, 90mm MAF, 36lb/hr inj
    TREMEC 3550, billet flywheel, RAM clutch, 4.10 gears

  7. #7
    it's soo-tack sutyak's Avatar
    Join Date
    Aug 2006
    Location
    Fairmont, WV
    Posts
    2,467
    Power curve any different? (better)
    mark
    '04 Mach 1. Built. Turbo. 667whp/631wtq
    '06 Focus. Built. Turbo. WMI. 12.43 @ 115 (sold)
    '03 Mach 1 : 12.61 @ 106.59 (sold)
    he's into that, that spiritual stuff. <><

  8. #8
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193
    I don't know squat about modulars and I could have told you that Patriot sucks! I've heard nothing but bad things about these guys.
    Send them to TEA and see what they can do with them over this winter.
    Sorry to hear about your big money mishap.
    Always do tons and tons of research on products before purchasing big money items.
    Good luck to you!
    Corvette Z06

    Growing up.............Not everyone does it!


  9. #9
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    well, the heads are huge!!! the ports look awesome and the combustion chambers are dead on, but the car still is only making 13-14 lbs even with these heads on, so i am kinda thinking we need to think about an aftermarket intake and an inovators west lower pulley for some added boost...
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  10. #10
    Senior Member Killercanary's Avatar
    Join Date
    Aug 2006
    Location
    Altoona, PA
    Posts
    2,338
    Quote Originally Posted by Rodeheaver's View Post
    well, the heads are huge!!! the ports look awesome and the combustion chambers are dead on, but the car still is only making 13-14 lbs even with these heads on, so i am kinda thinking we need to think about an aftermarket intake and an inovators west lower pulley for some added boost...


    Good thinking Tim. If the boost hasn't changed yet the ports are much larger then there is defintitely a restriction somewhere else and the heads might not be as bad off as they appear at the moment.

    Good luck Jive!
    -Paul

    1995 GT 'vert
    Best times on old 302 combo:
    12.03 at 112.5mph NA
    Best time with 9:1 compression NA dart block 331 setup:
    11.50 at 121mph
    Dyno'd: 415rwhp/410rwtq


    2004 Z16 commemorative edition Z06
    100% stock: 11.9 at 118mph




  11. #11
    Spoon Killer HidalgoGT's Avatar
    Join Date
    Sep 2006
    Location
    Uniontown
    Posts
    1,792
    Quote Originally Posted by Rodeheaver's View Post
    well, the heads are huge!!! the ports look awesome and the combustion chambers are dead on, but the car still is only making 13-14 lbs even with these heads on, so i am kinda thinking we need to think about an aftermarket intake and an inovators west lower pulley for some added boost...
    I was reading somewhere that with a new head setup and extra's it is possible to make less boost but more power. Although his 7hp gain doesn't go along with what I read.
    2001 Dodge 2500 The Big Bad "D"
    4" exhaust,38"MTZ's,5.5 Fabtech Lift,Cold air intake,Silencer ring MIA,Smarty tuner,Edge Drag comp, 64/71/.80 s300 turbo 175hp injectors.
    321Hp/783Tq New power numbers this spring.
    1987 Dodge 1/2 ton gasser 4x4 "jr"
    Ricers: For those who don't have the balls or skills to drive American Muscle.
    Not cool cause I don't drive a mustang anymore.
    Got Smoke?
    http://www.youtube.com/watch?v=BGIvJflAxZU

  12. #12
    Member 2000GT's Avatar
    Join Date
    Aug 2006
    Location
    Plum, PA
    Posts
    1,611
    Saying I'm disappointed is an understatement. I have spent thousands off dollars to ruin what was a nice car.

    F*ck!!!
    that is one of the reasons that I retired from racing. I would get so frustrated by adding this or that only to run the same or slower. Anyway, I hope you get things sorted out Jive.

    Sean

  13. #13
    Senior Member Jivepepper's Avatar
    Join Date
    Aug 2007
    Location
    Morgantown WV.
    Posts
    563

    This should help

    Well I ordered some new goodies hoping to make more boost. A 7.5" ATI 10% overdrive Harmonic dampner (aka crank pulley) and Vortechs 8 rib pulley uprgrade with the manual tension provision and their 2.75" SC pulley. The 6 rib slips a little. I'm hoping to go from 13 psi to about 16-17, but 19 would be cool too lol.

    I called Gunner at Patriot and asked why I gained only 7hp. He said there was a 27* diff in temps that day and my tuner uses standard numbers.

    He says if I up the boost I'll see a nice difference. The ports were huge compared to the stockers.

    I have to admit despite the heat the car feels strong almost like it does in cooler weather.
    Last edited by Jivepepper; 07-03-2008 at 04:48 PM.
    665/540 New times coming
    Old times with 516/453 11.10 @129 Best trap 130.69 -750' DA lol
    DYNO VID ---> http://www.youtube.com/watch?v=K9uOS732mdA

  14. #14
    SCS Addict Stangman701's Avatar
    Join Date
    Aug 2006
    Location
    Robinson Twp.
    Posts
    2,143
    If you've got the short block and supercharger to handle it(which it seems like you do) there's no reason not to run more than 13 PSI Good luck, look forward to seeing what kind of #'s you get with more boost. Just curious, are you running the stock tranny? My brother might be getting a 99-04 GT soon and I'm just wondering what the stock tranny can handle.
    2015 Charger Hellcat
    2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET

    85 GT
    Heads and Cam plus other bolt ons

    73 F250
    Lifted, 35's, 460 4spd

    Real name = Ray


  15. #15
    Senior Member Jivepepper's Avatar
    Join Date
    Aug 2007
    Location
    Morgantown WV.
    Posts
    563
    Quote Originally Posted by Stangman701 View Post
    If you've got the short block and supercharger to handle it(which it seems like you do) there's no reason not to run more than 13 PSI Good luck, look forward to seeing what kind of #'s you get with more boost. Just curious, are you running the stock tranny? My brother might be getting a 99-04 GT soon and I'm just wondering what the stock tranny can handle.

    Yeah its forged. I'm using a stock tranny from 2002 gt.
    665/540 New times coming
    Old times with 516/453 11.10 @129 Best trap 130.69 -750' DA lol
    DYNO VID ---> http://www.youtube.com/watch?v=K9uOS732mdA

Similar Threads

  1. Patriot heads
    By AutomagicSN98 in forum SN95-New Edge
    Replies: 6
    Last Post: 03-06-2012, 11:20 AM
  2. Patriot St 2 Heads W/278 Cams
    By Black02GT in forum Ford Vehicles
    Replies: 1
    Last Post: 11-01-2010, 06:12 PM
  3. patriot heads
    By bittersweetfox in forum Ford Vehicles
    Replies: 0
    Last Post: 09-09-2010, 09:49 PM
  4. Jim Brossard patriot!
    By map351 in forum The Bar
    Replies: 3
    Last Post: 04-23-2009, 10:04 AM
  5. Patriot heads installed and running
    By Jivepepper in forum General Tech
    Replies: 12
    Last Post: 06-28-2008, 02:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •