Results 1 to 18 of 18

Thread: parts for sale

  1. #1

    parts for sale

    1. 99 cobra wheels some slight scuffs with no tires matte finish and no ctr caps 130.00 dollars
    2. 99 cobra wheels with more scuffs and optional tires nitto nt01 2 are in good shape and 2 are wore down 150.00 dollars
    3. pulley kit ( I belive underdrive pulleys) 15.00 dollars
    4. c&L MAF with sensor slighty used 60.00 dollars
    5. Tokico 5 way adjustable shocks and struts (need revalved) 25.00 dollars number on shock body if helps BE3608
    6. H&R springs set of 2 front and 2 back Numbers on springs are as follows 51650.88R, 51650.88F also number 10/2000 125.00 dollars
    7. H&R springs set of 2 front and 2 rear numbers on springs are as follows 51650.88F, 51650RTA1 alos numbers 3/2001 125.oo dollars
    8. torsion rear locker for an 8.8 rear used only 2 months 100.00 dollars
    9. ford rear diff 25.00 dollars limited slip (one wheel)
    10. water pump from ford used but in great shape and I belive it run in reverse 30.00 dollars

    I could not get photos on post so please email me directly for photos of what you would like to see

    e-mail aandm@ptd.net

    PS killarcanary you looked good this weekend and see you there again andy

  2. #2
    bump

  3. #3
    Senior Member Killercanary's Avatar
    Join Date
    Aug 2006
    Location
    Altoona, PA
    Posts
    2,338
    Thanks for joining Andy! You should post up some pics and introduce yourself in the new users section.

    How bad are the Nt01's? I may be interested. I will not be at the Aug 10th auto-x but I should be at everyone after that if you still have them at that time.
    -Paul

    1995 GT 'vert
    Best times on old 302 combo:
    12.03 at 112.5mph NA
    Best time with 9:1 compression NA dart block 331 setup:
    11.50 at 121mph
    Dyno'd: 415rwhp/410rwtq


    2004 Z16 commemorative edition Z06
    100% stock: 11.9 at 118mph




  4. #4
    Senior Member
    Join Date
    Sep 2006
    Location
    Bridgeville
    Posts
    1,278
    email pics of both sets of 99 cobra wheels to rlmst23@mail.rmu.edu thanks

  5. #5

    tires

    here is tires
    Attached Images Attached Images

  6. #6

    rims first set

    rims first set with out tires unless want them for free
    Attached Images Attached Images

  7. #7

    rims set number two

    rims set number two
    Attached Images Attached Images

  8. #8
    ktm250sxf
    Join Date
    Jul 2008
    Location
    Penn Hills
    Posts
    1
    - are them springs lowering springs ans if they are how much will they lower it
    - will they fit a 97 mustang gt, thankz, JOE

  9. #9
    Senior Member Killercanary's Avatar
    Join Date
    Aug 2006
    Location
    Altoona, PA
    Posts
    2,338
    Andy, I'll call you tomorrow but I want the cobra's with the neo-gen tires for my mustang as I will be autocrossing a few times in the fall season. I just have a few questions for you first. Thanks!
    -Paul

    1995 GT 'vert
    Best times on old 302 combo:
    12.03 at 112.5mph NA
    Best time with 9:1 compression NA dart block 331 setup:
    11.50 at 121mph
    Dyno'd: 415rwhp/410rwtq


    2004 Z16 commemorative edition Z06
    100% stock: 11.9 at 118mph




  10. #10

    springs

    Joe these should fit your year. I checked the web and they are the same series numbers for 91 and 97. They also do lower the car about 1 in all around. Thanks Andy

  11. #11

    pictures springs

    set 1 - picture 1
    set 2 - picture 2
    Attached Images Attached Images

  12. #12
    bump

  13. #13
    Senior Member wick's Avatar
    Join Date
    Sep 2006
    Location
    Carnegie
    Posts
    8,400
    Hey, where you located? I may take the shocks. Mine are just cylinders that once held oil and now just have air. HAHAHAH Originals from '89.
    Rob
    1 Monte SS. White.

    Banned dates
    11/27/08
    4/25/11
    3/28/12
    12/1/12
    There are more but that's all that was logged!!!

  14. #14
    Senior Member wick's Avatar
    Join Date
    Sep 2006
    Location
    Carnegie
    Posts
    8,400
    Thaks alot Andy. Nice to meet you yesterday.
    Rob
    1 Monte SS. White.

    Banned dates
    11/27/08
    4/25/11
    3/28/12
    12/1/12
    There are more but that's all that was logged!!!

  15. #15
    bump

  16. #16
    Senior Member
    Join Date
    Sep 2006
    Location
    Bridgeville
    Posts
    1,278
    Hey how big is that maf?

  17. #17
    Senior Member Killercanary's Avatar
    Join Date
    Aug 2006
    Location
    Altoona, PA
    Posts
    2,338
    Andy let me know if the deal for the cobra wheels with the nitto tires fell through or not.
    -Paul

    1995 GT 'vert
    Best times on old 302 combo:
    12.03 at 112.5mph NA
    Best time with 9:1 compression NA dart block 331 setup:
    11.50 at 121mph
    Dyno'd: 415rwhp/410rwtq


    2004 Z16 commemorative edition Z06
    100% stock: 11.9 at 118mph




  18. #18

    photos of locker, pulley and MAF

    locker cost is 100.00 it is a torson for an 8.8 rear 28 spline
    pulley cost is 15.00
    maf is c&l 76MM cost is 60.00
    Thanks for looking Andy

    wheels are all gone and strut too.
    Attached Images Attached Images

Similar Threads

  1. For Sale: 2011-2013 Mustang GT 5.0 Parts For Sale
    By BLKNYLW in forum Ford Vehicles
    Replies: 15
    Last Post: 09-11-2012, 09:30 AM
  2. V6 Parts *For Sale*
    By dGrabber in forum Ford Vehicles
    Replies: 1
    Last Post: 07-11-2012, 12:56 AM
  3. Few parts for sale....
    By ccoyle0103 in forum Ford Vehicles
    Replies: 5
    Last Post: 06-27-2011, 11:17 AM
  4. Mustang Cobra Parts Termy Parts for sale
    By KeystoneJohnny in forum Ford Vehicles
    Replies: 6
    Last Post: 05-31-2010, 01:29 AM
  5. Parts for sale and parts for free
    By Tony71502 in forum Ford Vehicles
    Replies: 10
    Last Post: 01-26-2009, 08:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •