New Dyno Numbers on my NA 347

[94Cobra]

Thanks. It is a blast to drive on the street with all that torque available even down low. I had a machine shop in Erie rehone and rering the engine. 955 Automotive - the builder's name is Jason Ore. He used to assemble engines for the Miller Lite team in the Busch Series. Extremely reasonably priced and worth the drive IMO.

[Killercanary]

Nice numbers! That thing is pretty strong down low!

[94Cobra]

Killercanary - Are you running a pcv setup on your stroker motor or just breathers? I think I'm going to try running 3 breathers.

[Killercanary]

I'm running the PCV and a breather which everyone will say is wrong, but I've done it for years and never noticed any adverse effects from it. My PCV is plumbed into the pipe in front of the TB. It doesn't get vacuum here at idle, but when cruising it does. i also pounded the baffle plate under the lower intake down to make close up the huge gaps that existed between it and the lower intake itself to help cut down on the amount of oil makings its way into the intake. Holley's are notorious for this, but they are one of if not the best long runner intakes available for our cars.

[PaxtonShelby]

Congrats on those #'s Bob - can't wait to go for a ride!!

[94Cobra]

I'm running the PCV and a breather which everyone will say is wrong, but I've done it for years and never noticed any adverse effects from it. My PCV is plumbed into the pipe in front of the TB. It doesn't get vacuum here at idle, but when cruising it does. i also pounded the baffle plate under the lower intake down to make close up the huge gaps that existed between it and the lower intake itself to help cut down on the amount of oil makings its way into the intake. Holley's are notorious for this, but they are one of if not the best long runner intakes available for our cars.

Hello Killercanary. Would you mind posting a few photos of the pcv plumbing and breather setup? I want to finalize my pcv setup and then get a tune in the Spring.