? on flywheels for Bob or Mike

**lib88stang** · 12-10-2006, 09:41 PM

Can you use a flywheel off of a 2.3T Merkur on an 87 TC motor with TC starter? My Dad just wants to make sure it will work before he buys it.

Also I was wondering if the flywheel and starter off of my 1991 NA2.3 will work on my 86 TC motor??

**yeahloh95** · 12-10-2006, 09:45 PM

i haven't heard that the n/a 2.3 stuff is any different than the turbo parts so my guess is that it would work.

**lib88stang** · 12-10-2006, 09:54 PM

Originally Posted by yeahloh95

i haven't heard that the n/a 2.3 stuff is any different than the turbo parts so my guess is that it would work.

I didn't think so, but I wasn't sure.

**Martin0660** · 12-10-2006, 09:59 PM

As best I know, they are the same. The only reason I hesitate on the Merkur stuff is that they use the T-9 transmission. I looked it up for cheapo replacements, and get this....

http://www.partsamerica.com/ProductG...partnumber=703

He should be good to go acording to that and what I remember. I know the NA and turbo ones interchange (scares me

)

You starter will be fine, same deal across the board. An upgrade would be the Ranger mini starters, I havent tried one, but have been meaning to grab one to play with.

Bob Myers

**lib88stang** · 12-10-2006, 10:18 PM

Originally Posted by Martin0660

As best I know, they are the same. The only reason I hesitate on the Merkur stuff is that they use the T-9 transmission. I looked it up for cheapo replacements, and get this....

http://www.partsamerica.com/ProductG...partnumber=703

He should be good to go acording to that and what I remember. I know the NA and turbo ones interchange (scares me

)

You starter will be fine, same deal across the board. An upgrade would be the Ranger mini starters, I havent tried one, but have been meaning to grab one to play with.

Bob Myers

Thanks Bob, what year rangers had the mini starters?? if I go to Upullit I'll grab you one.

**Martin0660** · 12-10-2006, 11:23 PM

Not sure yet on the years Shaun, its also not as straightforward as just the starter, you need the solenoid and some other bits (wiring). I need to look at one and figure it out myself, I geuss its work about 10 pounds, and its a reduction starter. Its a good excuse to get me back to a junkyard too ;)

Bob Myers