What head gaskets are good?
What head gaskets are good?
ones that arent cracked...LOLLLLLLLOOOLL j/k
i've always had good luck with felpro kit from dick rughs
ridin fast,hittin da hills,throwin some dirt
2003 polaris predator 500
(wanna ride,just pm me!!!)
for what?? if for a 5.0, i like the felpro 1011-2, or if you gonna go big, i use the cometic, i have found that the bang for the buck is the good ol mrgasket graphite set..Originally Posted by lib88stang
2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
www.Rodeheavershotrod.com
I'd say its going to depend on what you're doing....personally i'd see no point in buying a set of $150 head gaskets if you're going to have a 350hp street car.... however if you're going to boost it and run the shit outta it, then get some good MLS gaskets...
2015 Corvette Z06
- Shark Grey / Kalahari
- bolt-ons, tune, lots of carbon fiber (642/671 rwhp/tq)
Felpro 1011-2 they are only 35.00 each.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
mild build with 100shot
1011-2 will work for that.
My Fel-Pro 9333's are holding up to 20psi on my ole 302.......
You can get them at Advance Auto Parts for like $17 a piece too!
Corvette Z06
Growing up.............Not everyone does it!
My Fel-Pro 9333's are holding up to 20psi on my ole 302.......
You can get them at Advance Auto Parts for like $17 a piece too!
these are the best.I wouldn't use 1011-1's or 2's if you gave them to me and cometics ae overkill.If you are blowing 9333's you have issues and a cometic gasket is only going to fix it till you burn up pistons cause you will burn holes in pistons before you blow a cometic
I have also used the 8548pt2's on my stock 302 shortblock and hci spraying a 175 rwhp NX wet kit and split the block and never blowed them
88 GT...and some boost
I really like the 9333's I have used them in a quite a few boosted 302's with no issues and in nitrous engines with no problems either. The 8548 is a good gasket also.
http://www.streetlethalperformance.net
Let us know your parts needs! We will work to get you the lowest possible price!
X2..
Thanks for the info guys.
i have had good luck with the felpro 1011-2s but i just installed a s trim so we'll see how well they hold up to some boost
What head bolts do you use?
arp bolts here
Same. Torqued to 85 on the short ones and 90 on the long ones as per ARP's updated specs.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
Does it matter if they are 6 or 12 pt?
Dunno, mine are 6 point.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
Posting Permissions
Reply With Quote
Bookmarks