Trick Flow upper plentum/throttle body

[Jper]

Well this weekend Im probably ordering this.. http://store.summitracing.com/partde...5&autoview=sku

Has anyone on here installed these parts from Trick Flow? Any tips on install?

[Jper]

bump..

[Troll]

pretty simple bolt on. done it twice. take some close up pics with your digital camera and make sure you put everything back exactly as it came off.

trick flow should send some detailed instructions, too. good luck.

[Jper]

Cool, thanks man!

[Rodeheaver's]

yah, that is really easy, and i think they give you directions if you get lost.. or just give me a call at the shop if you need any assistance.

[Jper]

yah, that is really easy, and i think they give you directions if you get lost.. or just give me a call at the shop if you need any assistance.

Thanks man, I was talking to Clark on here at the track last night and he said you install headers for 250? I will be payin ya a visit in the fall

[Rodeheaver's]

Thanks man, I was talking to Clark on here at the track last night and he said you install headers for 250? I will be payin ya a visit in the fall

Tell CLARK, if you both want to get them done at the same time i will give yinz a better deal.. i think when i did Troll's car, the headers and cams were worth 80 or 90hp.. please correct me if i a wrong Troll...

[Jper]

Tell CLARK, if you both want to get them done at the same time i will give yinz a better deal.. i think when i did Troll's car, the headers and cams were worth 80 or 90hp.. please correct me if i a wrong Troll...

Impressive..I will let him know! Also, do you do tranny work? I think I might be buying a used transmission in the fall due to the high milage on mine, and things starting to break..

[Rodeheaver's]

Impressive..I will let him know! Also, do you do tranny work? I think I might be buying a used transmission in the fall due to the high milage on mine, and things starting to break..

hecks yah!!! dude, we do it ALL.....

[Jper]

hecks yah!!! dude, we do it ALL.....

Would you be able to supply me the tranny? What am I looking at in terms of price?

[Rodeheaver's]

Would you be able to supply me the tranny? What am I looking at in terms of price?

pm sent..

[Troll]

Tell CLARK, if you both want to get them done at the same time i will give yinz a better deal.. i think when i did Troll's car, the headers and cams were worth 80 or 90hp.. please correct me if i a wrong Troll...

About 50hp at the wheels. It put down 239 before the underdrive pulleys, cams and headers. 294 after.

[Rodeheaver's]

About 50hp at the wheels. It put down 239 before the underdrive pulleys, cams and headers. 294 after.

ok, it was fifty, but that is still a nice increase.. I knew there was a 90 in ther somewere..

[FineLineMtrSprt]

Make sure you check all the wires and connections when you get the plenum back on...first time i did it i forgot to hook back up the cruise control. I was itching to get back on the road.

[Jper]

Ok well after christmas I gotta buy my car a gift, and an throttle body/plenum is what I want..I see BBK has out this one piece and on AM.com, they say "NOTE: A 78MM Throttle Body is suggested for a heavily modified GT as a stock and mildly modified GT does not flow enough air to benefit from the larger Throttle Body." Is this true? Is my car modded enough to handle this intake? For the price being 250 and the trick flow combo being 250 Id rather go BBK. Any info asap would be cool, I wanna order this tomorrow so I can install this over the weekend!

Link to the BBK
http://www.americanmuscle.com/bbk-78...le-intake.html

[2001GTTT]

Josh just get the 78mm. Then you'll have it. Marks and Joes cars run amazing with it

[wishIhada5.0]

I like my C&L/BBK 75mm combo with a JLT fenderwell, I have seen Mark and Joe's car and they liked it alot too...I dont see why 78mm would be to big, I'd say go for it. I know the part of the thread that mention headder install was back in August but have you guys gone to have them done yet? I have a set of BBk long tubes that need installed yet and Im debating on whether to swear at em for 8+ hours or take em to a shop. I would imagine the shop would jus drop the K-member huh?

[2001GTTT]

I like my C&L/BBK 75mm combo with a JLT fenderwell, I have seen Mark and Joe's car and they liked it alot too...I dont see why 78mm would be to big, I'd say go for it

I havent met you yet...you need to roll down to carlisle with us.

[wishIhada5.0]

I dont know if Im going to Carlisle yet this year...my bank account might be a little dry by then cuz its parked for the winter ;) lol The more I look at it the more I wanna do with it lol I think we have met and not known it, Clarks is the other yellow GT from Ligonieer right? and yours has the really dark tint right? I think I might have seen you down at Little Cruisers

[AdamantiumSilvr]

On my thread below when I asked about exhaust parts and on what to do next. I asked if thats my next cheapest best bet, but no one really responded. There is an article on page 108 on how to do it in the January 09' Muscle Mustang & Fast Fords Mag with John Urist on the front. Plus, u get the Hot! Bonus! 2009 Bikini Calendar with this issue!