Results 1 to 6 of 6

Thread: 11k 94 Cobra

  1. #1
    347cobra schiavon8241's Avatar
    Join Date
    Mar 2008
    Location
    pittsburgh, pa
    Posts
    178

    11k 94 Cobra

    SORRY FOR THIS REPOST. ALOT OF STUFF I WANTED TO ADD AND DROPPED THE PRICE. CAR NEEDS TO GO!

    Car has just over 60thousand miles on the body
    Tranny was rebuilt at 30thousand
    Motor was rebuilt 4200 miles ago
    First 1000 miles were half highway, half stop and go and never taken past 3500rpms.

    Stock 302 block honed and reconditioned stock heads
    Eagle shot block 347 stroker kit
    All new gasket, and repainted block
    AC and Smog delete
    Clutch has 4200 miles on it
    BBK Headers/custom made xpipe/straight 3inch exhaust all the way back (no cats, no mufflers) by tim up at rodeheavers
    4:10s
    CAI
    Ford racing wires, and plugs have 4200 miles on them
    Custom rear seat delete with mounted ZEX bottle.
    ZEx dry nitrous kit, purge kit, bottle heater, and blow down tube
    Nitrous was ran 2 times at the track on street tires with advanced timing and 110 octane.
    All nitrous activation runs to 3 switched mounted in ash tray

    I would give the overall condition of the outside of the car a 7.5/10
    Right rear quarter panel needs repaired. It has 3 dents and 2 scratches from someone keying the car
    Front bumper has alot of scratches, and chips from daily driving so it could be repainted.
    Top right panel behind passangers window has two small pressure cracks
    Rear facia has a bump in it, but i just bought a new one and have it in my garage. MUSTANG letters are done with bondo and smoothed over for a more shaved look
    Deck lid just had spoiler holes and ford oval holes welded in and all repainted.
    As for inside of the car. ITS IMMACULATE
    The inside of this car is gorgeous, not a rip in the leather. Its in perfect condition. Carpets and mats are in awesome conditon, and with sale i still have the leather rear seat that was removed for the seat delete. Brand new Cd player with remote, and MACH460 sounds awesome.

    Oil pressure, temp, and volts gauges are mounted where cassette player was and cd player is up top.

    Car has 17x9 deep dish gunmetal painted cobra rs
    Front tires have about 75% rears 50%

    Before taking up any of your time and meeting you to have you look at the car i will try and list off EVERY flaw that it has.

    Rear sway bar broke a few weeks back
    Drivers side window motor freezes up in heat over about 80*
    Car could use new pads and rear rotors
    Speedometer needs a new gear where it runs to the tranny
    Shocks/struts could be replaced with something a little more quality. they are monroe and it gives the car a sort of rough ride on bumpy roads.
    Steering has a little play it in from left to right.
    more than likely tierods
    few flaws on exterior that were already listed
    other than that, i cant think of anything at this time.

    Untuned, and N/A the car ran a 12.6 with a 1.6 60ft
    Easy 11 sec car.



    Thanks,

    Jonathan.

    412-780-9922

  2. #2
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193
    Who rebuilt the engine?
    Corvette Z06

    Growing up.............Not everyone does it!


  3. #3
    347cobra schiavon8241's Avatar
    Join Date
    Mar 2008
    Location
    pittsburgh, pa
    Posts
    178
    Quote Originally Posted by gmkillr View Post
    Who rebuilt the engine?
    smo machine shop in houston pa

    i always heard very good things, and a local cop near me has a fast ass foxbody "low 10 second car i think" recommended me.

    they did awesome work, and a very good price.

  4. #4
    347cobra schiavon8241's Avatar
    Join Date
    Mar 2008
    Location
    pittsburgh, pa
    Posts
    178
    http://www.youtube.com/watch?v=RdXedoSTR_s

    little idle video from a while back.

  5. #5
    347cobra schiavon8241's Avatar
    Join Date
    Mar 2008
    Location
    pittsburgh, pa
    Posts
    178
    bump

  6. #6
    Senior Member
    Join Date
    Apr 2008
    Location
    Polar Vortex
    Posts
    6,031
    Quote Originally Posted by schiavon8241 View Post
    smo machine shop in houston pa

    i always heard very good things, and a local cop near me has a fast ass foxbody "low 10 second car i think" recommended me.

    they did awesome work, and a very good price.
    Car looks good man, good luck on the sale, people dont seem to be buying anything right now.

    SMO is 1 minute down the road from my house, and they are pretty good.

Similar Threads

  1. FS: 2004 Cobra 11k Miles
    By 6SPD04COBRA in forum Ford Vehicles
    Replies: 8
    Last Post: 12-30-2010, 06:58 PM
  2. My Kenne Bell 04 Cobra vs Gate's KB 03 Cobra.
    By NateSVT in forum Pictures & Videos
    Replies: 11
    Last Post: 07-13-2010, 08:15 PM
  3. WTB: 8 17x10.5 Cobra R or 03 Cobra wheels
    By Mark Aubele in forum Ford Parts
    Replies: 4
    Last Post: 04-26-2009, 02:12 PM
  4. WTT or sale 2003 cobra long block for 2001 cobra longblock
    By StreetLethal in forum Ford Vehicles
    Replies: 7
    Last Post: 01-17-2008, 07:51 PM
  5. Replies: 1
    Last Post: 10-06-2007, 11:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •