Looks better even without the fillers. Hard to tell from the pic, but it looks like it fits the contour of the center filler panel better than the stock ones. Where did you get the black emblem? I wouldn't mind doing one of those also. Post up some more pics once the tail light fillers come in!
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
You're right. The 13/14 tails are less bulky looking. It doesn't look too bad without the fillers, but they should really finish it off. If the car wasn't black I'm not sure how it would look. I could have did the whole 13/14 rear bumper swap, but I like how this bumper has textured plastic behind the wheels.Originally Posted by Stangman701
The black emblem is plasti-dip, if it didn't turn out nice I was going to remove the faux cap all together.
I've seen them on a few different colors that didn't look great. Seems like black, grey, and white all look decent though IMO. Other colors the fillers kind of stick out. I like the look of the 13/14 bumper better, but not enough to buy one. I'll just go with the spacers too.
That plasti-dip turned out great. I might have to go that route as well. I wonder how much of a pain it would be to do the Shelby letters too?
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
morning boys.
2018 Jeep Grand Cherokee
1931 Ford Model A - Project
1991 BMW 325iX
1978 Ford F150
1952 Ford F2 - Project
2001 Mustang GT - gone but never forgotten. RIP.
Deadpool was halarious.
-Barry
2003 Ford Mustang Dark Shadow Grey 4.6L GT
2004 Ford F-150 Super Crew Dark Shadow Grey 5.4L
Kung-Fu Panda 3 was pretty good. I couldn't take my 10 year old to see Dirty Grandpa. :-)
2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.
1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle
1966 Oldsmobile Toronado - currently NOT on jackstands
Nor could you take her to see Deadpool!
Sent from my SAMSUNG-SM-G900A using Tapatalk
I need to see Daddy's Home, Dirty Grandpa, and Deadpool.
2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.
1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle
1966 Oldsmobile Toronado - currently NOT on jackstands
Dirty grandpa was ok. Don't expect much other than Deniro being as raunchy as possible for 2 hours. lol
Sent from my iPhone using Tapatalk
2019 Tesla Model 3 Performance
Not sure if DeNiro is struggling to cash (doubt it) or the money was too good to pass up, because this movie looks terrible from the previews. And that's before you factor in Zac Efron.
Dan -- 2003 Cobra DSG Coupe #6009
If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump
Gap fillers and tinted inserts are in. Turned out good imo.
made my first batch of mead ever. pleasantly surprised and nice change of pace from beer, wine, or rum.
I've had mead before. It's kind of like a honey champagne taste. High alcohol content for sure. Takes a long time to make too right?
I made some fender aprons for my 11 f150 today. Tired of salt getting thrown up on the engine. uploadfromtaptalk1455661190510.jpg
That turned out sweet.Gap fillers and tinted inserts are in. Turned out good imo.
17 Ram 1500 Big Horn Hemi
16 Comp O GT Performance Pack
03 Oxford white Cobra (Gone but not forgotten)
That's about right. I added some other fruits to help balance things out during the ferment. Yeah, Id say based on the sip to head buzz time that its around 16%. Mine was fermented for over 3 weeks before I started sampling, and even now it pops the cork when the house is warm. If you're impatient after 3 weeks I'd sorbate it to end the yeast once and for all.
The yeast strain I used was Lalvin K1-V1116 to help bring out the fruitiness of the mead.
That fits perfect. Will likely be my first mod if I get that carGap fillers and tinted inserts are in. Turned out good imo.
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
Watched Deadpool the other night, let me tell you I now have a new favorite super hero movie!
Absolutely great movie!
Corvette Z06
Growing up.............Not everyone does it!
looks greatGap fillers and tinted inserts are in. Turned out good imo.
Current Stable
2013 School Bus Yellow Boss 302
1993 Red Cobra
Previous Stable
2012 White Mustang-Traded
2004 Competition Orange Terminator - Sold
2003 Black Cobra-Traded
1998 Black Cobra-Traded
1991 White 5.0 Conv-Sold
1986 Purple 5.0 Trunk-Sold to Psycho 5.0
https://www.facebook.com/steelcitymusclecars
https://www.facebook.com/cruisin.cranberry
Thanks for the compliments gentlemen
Posting Permissions
Reply With Quote
Bookmarks