94-95 VC question

[94svtcobra]

Can you suggest somewhere that sells the 94-95 style covers??

[Killercanary]

The only company that makes 94-95 specific valve covers is moroso and they are >$400 a set which is crazy. The TF short covers seem to work as does fox VC's with some work. I heard that some of the anderson VC's can be made to work as well. The alternator clearance is the big issue with VC's and 94-95's.

[yeahloh95]

i run trick flow low profile they seem to work ok

[Killercanary]

I should add that I too will be running the trick flow VC's when I install my new heads. i will have the trick flow name sanded off before they go on the car though. :)

[Rio94gt]

Yeah not many options with valve covers for 94/95s as already stated. I saw somewhere that a company made 94/95 specific valve covers that were straight polished. I saw it on corral and cant remember the name. They were pretty cheap too.

[94svtcobra]

I saw a set like you're describing the other day, but didnt remember to write the site name down

[Killercanary]

Billy I think you are talking about the Joe Heck Racing VC's and although they make an attempt at being 94-95 specific, I have heard that they too need soem mods to work properly.

[94svtcobra]

killer ur inbox is full

[Killercanary]

I just cleared a few messages out!

[scott5]

the oil inlet gets in the way with the 94/95 throttle body set up if i remember right, atleast it did on the ford racing ones i was going to put on my black one. I have the driver side on but couldnt get the pass side on cause the throttle body was in the way of the oil fill tube..

I would just get the stock ones powdered coated if i had to do it again.

[Rio94gt]

Billy I think you are talking about the Joe Heck Racing VC's and although they make an attempt at being 94-95 specific, I have heard that they too need soem mods to work properly.

Yep, thats them. I swear everyhting needs a mod for a 94/95 car.