clutch safety switch??

[97LaserRed]

I know that this is the clutch safety switch but why is there 2 connectors? I have a conncetor under my dash for only one. its the one closes to the left. I have other connectors that plugs into the other side (by the gas pedal) and one more that loops back into itself. I thought it might be for the other plug but it doesn't fit. any ideas? I have all the brake connectors right. just dont know about this one?

[97LaserRed]

also does anybody know about the wiring harness. the directions say this..

The stock AODE wiring harness was also kept, we connected the VSS and reverse sensors and Removed from the AODE the shifter position sensor, connected it, fastened it to the T5 and placed it in PARK so the car would start.

I am keeping the aode harness and already know how to connect the vss and reverse but how do you wire it so its placed in "PARK" to start it?

[97LaserRed]

anybody?

[Rodeheaver's]

i take it that you are going 5-speed, you need to get a manual tranny harness for under the car, i have made them before the main thing is to get the reverse lights working and make a jumper for the neutral safety switch..

[97LaserRed]

i take it that you are going 5-speed, you need to get a manual tranny harness for under the car, i have made them before the main thing is to get the reverse lights working and make a jumper for the neutral safety switch..

I got the reverese lights to work. I just dont know whre the neutral saftey switch is to jump. I dont know which wires to jump either. could you help me out!!