Results 1 to 20 of 20

Thread: New BEST, My 11 Second car!!

  1. #1
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136

    Talking New BEST, My 11 Second car!!

    well guys, i took my car to the track for CJ Pony night at Beaver Springs Dragway... I didn't have a real good night :( I did however get a new best off of the one pass i did get to complete. I'm kind of bumed out that i didn't get a 10 second pass out of the car yet, but what can ya do.. It seems like i can beat the guts out of my car on the street for hours and hours and it takes it, but once i get to the track the darn thing just refuses to cooperate. I had 2 runs, on the second run i bogged again and my lower radiator hose layed on my crossover pipe and melted through and sprung a leak.. well i fixed that with another hose, and when i started it up the car was huffing a little coolant, so i can only assume i must have popped a headgasket also. I'll have to tear it down and find out.. here's the video of my first pass, and the time slip. The best part of the whole night was that me and my friends were the 3 fastest cars at the event unless someone beat us in the last 20 minutes. it was pretty neat hearing our names over the loud speaker. Not bad for 3 street cars that drove over 70 miles to get there.

    http://vids.myspace.com/index.cfm?fu...deoID=44887979

    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  2. #2
    On the down low cam303's Avatar
    Join Date
    Aug 2006
    Posts
    978
    The car is making the power. Invest a little into the driver mod and you will be low 10's all day!

  3. #3
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136
    yeah definately... i've just started running on slicks so that's a whole new ballgame for me trying to launch.. just need some more time, and i want to hook up a 2step to come off the line so that should make it a little more precise rather than just reving it up and letting it fly lol...
    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  4. #4
    never stock biminiLX's Avatar
    Join Date
    Jul 2007
    Location
    Beaver
    Posts
    2,406
    Very nice, you'll definitely get a 10 with more track time time!
    BTW, I made 598/580 at the tires and ran 132.5mph at 3150#, just for a comparison if you've not had it on a dyno.
    Any pics?
    -J
    '91 LX Bimini Blue
    427"/88mm on 16psi

    '99 Contour SVT
    Clean DD

  5. #5
    never stock biminiLX's Avatar
    Join Date
    Jul 2007
    Location
    Beaver
    Posts
    2,406
    Finally got the vid to load and it definitely spun the slicks on launch, you can pic up a lot of ET in the 60' for sure.
    -J
    '91 LX Bimini Blue
    427"/88mm on 16psi

    '99 Contour SVT
    Clean DD

  6. #6
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    congrats on the new time, that car is a beast.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  7. #7
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136
    Thanks for the comments guys... yeah normally i don't bog so bad on the launch, but that track was sticky, and i was actually nervous yesterday for some reason.... Probably because i did the same dang thing last year at CJ pony night lol. I haven't made it through a CJ night yet and drove home in one piece.
    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  8. #8
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193
    Sweet!
    Whats the combo?
    Corvette Z06

    Growing up.............Not everyone does it!


  9. #9
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    sweet

  10. #10
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    that is a sick mph!!!!
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  11. #11
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136
    Quote Originally Posted by gmkillr View Post
    Sweet!
    Whats the combo?
    78k mile origional 93 cobra hypereutectic bottom end
    edelbrock performer rpm heads 2.02
    RPM II intake
    75mm TB
    60# Injectors
    hp performance stage 1 60mm turbo kit at 14psi
    Alcohol Injection Systems Rear Trunk mount Methanol kit stainless dual nozzle
    full 3" exhuast through tail pipes
    bbk upper lowers
    hoosier full slicks
    stock 93 cobra T-5
    Tune it myself with an Anderson Ford Motorsport PMS
    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  12. #12
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193
    Quote Originally Posted by MillCreekMafia View Post
    78k mile origional 93 cobra hypereutectic bottom end
    edelbrock performer rpm heads 2.02
    RPM II intake
    75mm TB
    60# Injectors
    hp performance stage 1 60mm turbo kit at 14psi
    Alcohol Injection Systems Rear Trunk mount Methanol kit stainless dual nozzle
    full 3" exhuast through tail pipes
    bbk upper lowers
    hoosier full slicks
    stock 93 cobra T-5
    Tune it myself with an Anderson Ford Motorsport PMS

    Nice!
    I was comsider an AIS kit, how do you like it?
    What cam?
    Corvette Z06

    Growing up.............Not everyone does it!


  13. #13
    ILLBEATU fastfox91's Avatar
    Join Date
    May 2007
    Location
    huntingdon,pa
    Posts
    830
    its a fcam

  14. #14
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136
    yeah i forgot to mention the F-cam, and 3.55 gears. as far as the meth kit goes. that was the first time i got to use it and honestly i can't say that i did even use it. My timing was supposedly at 15* total that day according to my pms, but the air temps were so cold that even without the meth spraying the intercooler was keeping me in the low 110's. I never got a chance to crank the timing up to where i wanted it, but i will let you know. my buddy runs 22 or 23* with his on a very similiar setup.
    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  15. #15
    Senior Member no1fordgirl's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon, PA
    Posts
    2,496
    Congratulations on your new best! :)
    United We 'Stang
    2002 Mineral Grey V6 5-spd
    Count Your Blessings, not your Problems

  16. #16
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136
    Thanks... well i tore it down. Seems somehow i manage to bloew #2, and #3 cylinder head gaskets.. i'm gonna get my heads checked before i slap them back on to make sure they are true and ready to rip again. Heck maybe i'll hit the track one more time before winter if i'm crazy.
    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  17. #17
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    Quote Originally Posted by MillCreekMafia View Post
    Thanks... well i tore it down. Seems somehow i manage to bloew #2, and #3 cylinder head gaskets.. i'm gonna get my heads checked before i slap them back on to make sure they are true and ready to rip again. Heck maybe i'll hit the track one more time before winter if i'm crazy.

    You wont do it.






    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  18. #18
    Member
    Join Date
    Sep 2006
    Location
    robinson
    Posts
    1,091
    congrats

  19. #19
    Mustang Guru billyNOTnice's Avatar
    Join Date
    Apr 2007
    Location
    Huntingdon PA
    Posts
    1,136

    Talking

    Quote Originally Posted by 2001GTTT View Post
    You wont do it.

    yeah your right... lol i tore em all off and just let them sit. I didn't even take them to get checked yet and the track closes next weekend... which i work. Oh well.. i'm gonna worry about my 57 and getting it a new set of shoese and a better carb.
    Roll With The Mill Creek Mafia
    709RWHP/750RWTQ


  20. #20
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    Quote Originally Posted by MillCreekMafia View Post
    yeah your right... lol i tore em all off and just let them sit. I didn't even take them to get checked yet and the track closes next weekend... which i work. Oh well.. i'm gonna worry about my 57 and getting it a new set of shoese and a better carb.

    lol...fair enough.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

Similar Threads

  1. 84 mustang drag car/ street car
    By ocrowner in forum Ford Vehicles
    Replies: 1
    Last Post: 07-18-2012, 12:45 PM
  2. Replies: 0
    Last Post: 08-13-2009, 03:42 PM
  3. Street Car vs Race Car
    By travj31 in forum The Bar
    Replies: 35
    Last Post: 07-23-2008, 01:01 AM
  4. friday sept 29th last car star lite car show...
    By SUPRAGATES in forum Meets & Events
    Replies: 18
    Last Post: 09-29-2006, 04:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •