The vacuum line that comes off the distributor where does it attach at? I have a project car and its missing the line all together!
The vacuum line that comes off the distributor where does it attach at? I have a project car and its missing the line all together!
Most of the time it goes to ported vacuum. On some cars it ran through thermo-vacuum switches. Ported vacuum should be fine anyway though.
\
Originally Posted by jclose11
i think that's just vacuum advance, im not positive..... but i think any line will do
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
it has to go to a vacuum port that is ABOVE the throttle blades, so it only get a vacuum signal when the throttle is open, this is usually on the front metering plate of a holley, the easy way to check for it is to find a port that has no vacuum at idle and has a vacuum when you hold it at part throttle...
2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
www.Rodeheavershotrod.com
Thanks a ton guys for the help.
Posting Permissions
Reply With Quote
Bookmarks