those are 10th anni. cobra wheels I believe...and they are 17's.Originally Posted by blizzard
x2what wheel/tire combo/size is that? fits nice
those are 10th anni. cobra wheels I believe...and they are 17's.x2
2018 Jeep Grand Cherokee
1931 Ford Model A - Project
1991 BMW 325iX
1978 Ford F150
1952 Ford F2 - Project
2001 Mustang GT - gone but never forgotten. RIP.
Yup... They are 10th anniversary 2003 Cobra wheels. I have 17" MT Drag Radials in the back. 275/40. The rear fits ok... But in reality could fit a way taller tire.. I like the way it turned out... I'm still waiting to get my entire car repainted though. then i'll be happy.
Roll With The Mill Creek Mafia
709RWHP/750RWTQ
thats sick!!! i love the 10th ae wheels on fox bodys
Thanks guys :)
Roll With The Mill Creek Mafia
709RWHP/750RWTQ
Nice upgrade there, you will love the brakes and should look great when painted.
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
Some of you might remember the ttop coupe we picked up last spring. Rusty was a good name...
over summer we threw on these 93 cobra rims and messed with a new look for hood and grill
20build/rustybuild002.jpg[/IMG]
Pretty ain't it. Luckily the ttop is in good shape, got a new quarter for the passenger side and two new doors, gonna start the mini tub next, aiming for a beautiful stance like Biminilx.
1993 notch---DSS level 20 race prep block---HP t60 Street turbo kit
512RWHP/622 ft.lbs.tq.@10psi
COVER AND FEATURED IN NOVEMBER 2007 MM&FFMAGAZINE
Featured in Mustang Enthusiast Mag. Sept. 2008
FEATURED IN APRIL 2005 OF 5.0 MUSTANG MAGAZINE
Lookin' good Terry, I'm sure it will turn out as well as the turbo coupe.
What are the plans after the minitub?
I still don't have the interior in so if you need any pics let me know (Dave also used my car for some of his instruction).
Hope to see you at some of the races this year.
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
Happy New Year to you and yours. Saw your car on their site. I feel like I'm making good progress. I got subframes welded in the floor, try to get more pics this weekend. If my stance turns out as good as yours I'll be in there.
1993 notch---DSS level 20 race prep block---HP t60 Street turbo kit
512RWHP/622 ft.lbs.tq.@10psi
COVER AND FEATURED IN NOVEMBER 2007 MM&FFMAGAZINE
Featured in Mustang Enthusiast Mag. Sept. 2008
FEATURED IN APRIL 2005 OF 5.0 MUSTANG MAGAZINE
Have my duels sitting in the basement. Waiting for warmer weather! Stang tucked away under it's blanket until at least March!
Sam
07 V6 Vista Blue, CAI, Fang Chin Spoiler, GT Rockers, Painted Mirror Covers, Billit Grill, FR500's & Nitto 555's, Shaker Intake
Well here's a picture from what i've gotten accomplished this winter. 5 Lug coversion... I played with the picture a bit.
When you gonna paint that hood?
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
I'm still on the waiting list to get the entire car repainted. There's only one guy i trust enough around here to actually keep my car and not take it out joy riding and beating the guts out of it.
Roll With The Mill Creek Mafia
709RWHP/750RWTQ
The vert went into the paint booth on Thursday, should have it back by Monday. I'll post pics when its done
MSD ignition/King Cobra clutch/Polished Cobra upper and lower/Ported GT40p w RR/ 70mm tb/ 24 lb injectors/ pullies/ Mac cold air/ Mac long tubes/ H pipe/ 3:73 gears/ 3g alt/ welded sub frames/ Alum driveshaft/ CC plates/125 shot of juice/custom trunk/suspension goodies.
FIRST PLACE 87-93 FOX BODY BUCKEYE STANGS SHOW 2010 AT SUMMIT RACING
283 hp / 320 tq on mustang dyno (all motor)
Got the dash out and the evaporator out. I have to order a new heater core Monday.
Yikes!!
2001 Dodge 2500 The Big Bad "D"
4" exhaust,38"MTZ's,5.5 Fabtech Lift,Cold air intake,Silencer ring MIA,Smarty tuner,Edge Drag comp, 64/71/.80 s300 turbo 175hp injectors.
321Hp/783Tq New power numbers this spring.
1987 Dodge 1/2 ton gasser 4x4 "jr"
Ricers: For those who don't have the balls or skills to drive American Muscle.
Not cool cause I don't drive a mustang anymore.
Got Smoke?
http://www.youtube.com/watch?v=BGIvJflAxZU
thats scarey...
what spindles and axles did you use??Well here's a picture from what i've gotten accomplished this winter. 5 Lug coversion... I played with the picture a bit.
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
you can use 2 left side ranger axles and 5lug ranger rotors....cheap swap.
I used Moser 31 spline 5 lug fox length axles, and North RaceCars brackets.
Roll With The Mill Creek Mafia
709RWHP/750RWTQ
I think ranger rotors will only work on v6 and 4 cyl stangs due to the spindles being different on the v8 stangs. Lincoln LSC rotors work but they have a bigger center so you have to be careful on wheel selection. Not absolutely sure, someone correct me if I am wrong.
90 GT stock needing some minor work, traded my 87 Vert to my bro for it.
2004 RAM 1500 Quad Cab Hemi DD Gonna be up for sale soon
86 Notch New Project
so....progress is slow but sure...
Front wheels are here, rears are on the way.
New Eagle F1's all the way around.
Drilled and Slotted Rotors
BBK strut tower brace
B&M Ratchet shifter
manual valvebody
Black Bullitt style fuel door
driveshaft safety loop
smoked headlights
new mufflers
more pics later on....and many, many more parts coming.
the wheels look chrome, and from other angles they look black, I love them.
Oh, and theres a new project on the way too : )
2018 Jeep Grand Cherokee
1931 Ford Model A - Project
1991 BMW 325iX
1978 Ford F150
1952 Ford F2 - Project
2001 Mustang GT - gone but never forgotten. RIP.
Posting Permissions
Reply With Quote
Bookmarks