Results 1 to 17 of 17

Thread: F-150 guys come on in

  1. #1
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168

    F-150 guys come on in

    Where you guys go to get your aftermarket parts? I just looked up some forums.. Im basically just looking to add some bolt-ons wheels and tire combo (after i move) and decided to start doing some searching now. I still got my 02 F-150 with a 5.4 in it and looking to get some uniqueness out of it.

  2. #2
    Member
    Join Date
    Sep 2006
    Location
    robinson
    Posts
    1,091
    i may have a set of wheels for it. customer of mine had 5 16x10 mickey thompson wheels for his f150 right now there is 37inch boggers on the wheels sure he would let them go cheap though

  3. #3
    Senior Member
    Join Date
    Oct 2007
    Location
    Baldwin
    Posts
    259
    I bought tirs and wheels for my F250 from select tire in Florida, I couldn have been happier with their service. I would also look into 4 wheel parts wholsalers and see what they can get for you. www.4wheelparts.com
    2012 Husqvarna TE 449
    2009 Dodge Challenger RT Inferno Red
    2007 BMW E92 328xi
    2003 F250 Superduty
    1987 Mustang GT
    2004 SV650
    2000 Yamaha Blaster, heavily modded

  4. #4
    I like bacon! FineLineMtrSprt's Avatar
    Join Date
    Feb 2007
    Location
    Bunker Hill, Wv.
    Posts
    672
    You going for the offroad look or the baller look....or both? lol
    2012 Jeep Wrangler Unlimited Sahara hard top..frickin loaded!
    2010 Gt 5spd....WIFE's car.

  5. #5
    far from a newb!!! INSANELY CRAZY's Avatar
    Join Date
    Aug 2006
    Location
    out in the woods
    Posts
    4,948
    wow scott, this is the perfect thread from you. what better way to to be a tirekicker then to buy some tires for your truck. lmao..

    hahahahaha j/k nice wheels,decent size tire(not too big)
    ridin fast,hittin da hills,throwin some dirt

    2003 polaris predator 500

    (wanna ride,just pm me!!!)

  6. #6
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    not to highjack your thread scotty, but, does anyone know if Explorer lift kits and stuff like that will work on my Merc? I dont see why not but if anyone has any insight i would appreciate it, there isnt much aftermarket for my SUV.
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  7. #7
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by 2001GTTT View Post
    not to highjack your thread scotty, but, does anyone know if Explorer lift kits and stuff like that will work on my Merc? I dont see why not but if anyone has any insight i would appreciate it, there isnt much aftermarket for my SUV.
    Your Merc is an Explorer. Just like my Mark LT is a F-150.

  8. #8
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    Quote Originally Posted by Viper_ed View Post
    Your Merc is an Explorer. Just like my Mark LT is a F-150.
    thats what i figured. thanks ed!
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

  9. #9
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    yea clark.. Search for the fourms that were offered to ray in one of his threads and sign up they also have places for the explorer.....


    Really just looking to keep the stock lift but try to fit a lil bigger tire, with a 16in wheel.. Something like this

    http://www.4wheelparts.com/Wheels/MO...0100&t_pl=8900

    Was thinking of just getting a 17in so i can keep my stock tires and upgrade later.

  10. #10
    Member
    Join Date
    Sep 2006
    Location
    robinson
    Posts
    1,091
    hmmm i think the kid has stock 17s with brand new michelins if i recall too. i completely forgot about that. if looking for cheapest way to get new tires

  11. #11
    On the down low cam303's Avatar
    Join Date
    Aug 2006
    Posts
    978
    I ran 16x10 wheels on my 2002 f150 with 305-70-16 tires. I did not have a lift on the truck and had to trim the front valance a little to clear the tires when turned. It looked great IMO. After trimming the valance they never rubbed once in the 3 years I had them on there, even when off road. The wheels I had were ultras but summit sells them now as there brand.

  12. #12
    Senior Member RUTHLESS's Avatar
    Join Date
    May 2007
    Posts
    2,145
    I have a 98 4.6 F150 reg cab, short stepside bed. It just turned over 130K
    I am running NITTO Terra Grapplers and I love them so far. I have not been off road but they kick butt in the snow and don’t skate around on dry roads or make any noise. They are also wearing VERY well.
    As for performance mods.... Well the only thing that will make these trucks faster is driving them off a cliff. I hear that also increases gas mileage. I have a SCT X3 programmer, Volant CAI, Boral side exit exhaust and dead cats. I am looking at picking up electric cooling fans next.

    Before you mod I would recommend cleaning your throttle body and get the carbon out. Mine was so bad that I had to use an ice pick to clear the ports. It smoothed out the idle and got rid of the very short start up pause. I always like my vehicles to fire when I touch the key. That little 2 second crank kills me. Also go over all the vacuum hoses and put in a new set of plugs and wires.
    Stock 03 Cobra Vroom Vroom!!

    Proudly supports Street Lethal Performance and Rodeheaver's Hotrod Shop

  13. #13
    Senior Member
    Join Date
    Nov 2006
    Location
    Blairsville, PA
    Posts
    378
    I will say this, GOOD LUCK ON WHEELS... Almost every company out there has discontinued the 5x135mm bolt pattern for the 97-03/4 F150's. I went thru a 2-3 month ordeal trying to get wheels for my moms 03 SCrew. All they make anymore are some 16's, some 17's (some) and alot of 20's and 22's

    As for tires, Nitto Terra Grapplers, 2nd set we put on the truck, and they are a GREAT tire.

    as for performance, i get all my stuff from www.dpppower.com.
    2003 Sonic Blue Cobra - AccuFab Throttle Body, JLT "sonic blue" CAI, Diablosport Predator, 2.81 Pulley, 100mm Idler Pulley, Pro 5.0 Short Shifter, Bassani Catted X-Pipe, Bassani Cat-Back Exhuast, Eibach Sport Line Springs, FR500's, Corbeau A4 Microsuede seats, Sequential Tail Lights.
    1993 Ford Lightning - Gaylords Tonneau, LFP Traction bars, Eaton Posi, Cervini's Cowl hood + Roll Pan, Art Carr Valve Body.
    1995 F-250 PSD - Daily Driver

  14. #14
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    Yea i am going to be doing its 100k tune up.. I was going to get rid of the truck in spring but its starting to grow more and more on me for a dd.

    Just looking to get a cai, going to get tim to put an exhaust on it, and right now i am buying parts to do a lightning s/c swap

  15. #15
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    Whats the difference between the 5.4 in my 2002 and the 5.4 in the 04 and newer trucks? Everywhere i see they have parts but its for the newer 5.4s?

  16. #16
    Senior Member 383taman's Avatar
    Join Date
    Jan 2007
    Location
    shaler,pa
    Posts
    1,010
    I Think it was 04 that had 3 valves in them but not til late 04 trucks.



    Quote Originally Posted by scott5 View Post
    Whats the difference between the 5.4 in my 2002 and the 5.4 in the 04 and newer trucks? Everywhere i see they have parts but its for the newer 5.4s?
    89 Mustang (stock) DD
    82 Trans Am (not stock)
    98 Audi A4 (not so hurting)

  17. #17
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    Quote Originally Posted by 383taman View Post
    I Think it was 04 that had 3 valves in them but not til late 04 trucks.
    i did not even think about that.. i think your right.

Similar Threads

  1. Ford F-150 guys need advice
    By 89stang in forum Other Ford
    Replies: 6
    Last Post: 04-18-2013, 04:08 AM
  2. 5.4 5.4l Triton Motor 60k Miles F-150 F-250 F-350 E-150 E-250
    By onenastytbird in forum Ford Vehicles
    Replies: 25
    Last Post: 08-24-2008, 10:21 AM
  3. 5.4 5.4l Triton Motor 60k Miles F-150 F-250 F-350 E-150 E-250
    By onenastytbird in forum Ford Vehicles
    Replies: 6
    Last Post: 05-03-2008, 05:40 PM
  4. f-150 clutch help
    By White5.0 in forum General Tech
    Replies: 7
    Last Post: 01-08-2008, 11:21 PM
  5. F-150
    By SonofaBish in forum Ford Parts
    Replies: 16
    Last Post: 10-29-2007, 01:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •