4.30's preferably. 4.10's minimum.
Lots of gear fear around here.
4.30's preferably. 4.10's minimum.
Lots of gear fear around here.
Originally Posted by cam303
With an S trim Chris? I wouldn't do more than a 3.73 personally if it was my car since its a H/C/I combo with a vortec. With the trap speeds he's likely to see it'd be over 6200rpms easily going through the traps. If he doesn't have numbers I assume that it hasn't been tuned and thus may have the stock rev limiter.
How many lbs of boost are you seeing now with the pulley setup you have? Knowing that will make a HP guess easier.
-Paul
1995 GT 'vert
Best times on old 302 combo:
12.03 at 112.5mph NA
Best time with 9:1 compression NA dart block 331 setup:
11.50 at 121mph
Dyno'd: 415rwhp/410rwtq
2004 Z16 commemorative edition Z06
100% stock: 11.9 at 118mph
I missed the s-trim part. Thought it was N/A. In that case 3.73's sound right.
About 7 1/2 lbs. I am thinking it's running rich, the thing sucks up gas pretty bad.
Welcome.
3.73s FTW
With some gears it should see 11s
2013 Race Red F-150 Screw FX4 Ecoboost
1994 Rio Red GT
10.60 @122.88
Sold
Welcome.
3.73s FTW
With some gears it should see 11s
And traction, Lol.
Welcome.
3.73s FTW
With some gears it should see 11s
I have been looking around some other forums and I see most supercharged 306's are in the 12's. I want to be in the 11's, though. A small cube motor like this 306 would be hard pressed to get into the 11's N/A. I am not talking about some high compression, pop up piston, solid roller, carbed 306.
You should definitely be able to get into the 11s w/ gears, traction and practice. You'll trap close to 120mph which is easily 11 sec. potential but ET depends on alot of factors.
I'd suggest 3.55-3.73 gears depending on how you use the car and what tire.
Any pics?
Love to have more Foxbody guys here
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
HAHAHAHAH We have a member with a 302 hittin low 10's N/A. Stock bottom end.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
http://www.steelcitystangs.com/forum...ad.php?t=12351
Somewhere in tis site there are vids of this car.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
true, but by FAR the exception and a race car set-up.
If this guy has never been to the track, he should be happy w/ 12s IMO.
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
I went 10.60 on a stock 302 w/ GT40 iron heads.
2013 Race Red F-150 Screw FX4 Ecoboost
1994 Rio Red GT
10.60 @122.88
Sold
Yes J, you are corect there.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
3.55 or 3.73's and traction u should be in 11's
01' Gt=
Mac 2.5 in. prochamber with high flow cats, mac exhaust, steeda strut tower brace and bbk alum. underdrive pullies and more to come
87' Notchback 5.0 =
3.55's, rebuilt t-5, upper and lower control arms, steeda subframes, torque box reinforcements, mac girdle, s.s brake lines, b.s flywheel, ram hd powergrip clutch, steeda adj. clutch cable kit, steeda tri-ax and way to much other stuff to list
That's really hard to believe there. Probably a 347 and claiming it's a 302. Or hitting it with a shot of laughing gas.
I Kno Sum1 That Went 10.40's Stock Bottom,heads,intake,turbo So Anything Is Poss.
No, it's true. Good combo with weight reduction, steep gears, traction and great driving.
Yep and mineshaft DA I believe also, car and driver really get it doneNo, it's true. Good combo with weight reduction, steep gears, traction and great driving.
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
You dont need cubes to run pal. He proves it. I know him very well. No juice, straight na. Very well thought out combo and good driving. The bottom end bearing caps have never been cracked loose.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
Posting Permissions
Bookmarks