Page 2 of 2 FirstFirst 12
Results 21 to 38 of 38

Thread: Clutch Issues

  1. #21
    Senior Member DMmustangLX's Avatar
    Join Date
    May 2008
    Location
    Pittsburgh
    Posts
    229
    955.0 i raced u at the flash light drags two summers ago i had a black 5.0 hatch at the time u do nething to ur stang since?
    01' Gt=
    Mac 2.5 in. prochamber with high flow cats, mac exhaust, steeda strut tower brace and bbk alum. underdrive pullies and more to come

    87' Notchback 5.0 =
    3.55's, rebuilt t-5, upper and lower control arms, steeda subframes, torque box reinforcements, mac girdle, s.s brake lines, b.s flywheel, ram hd powergrip clutch, steeda adj. clutch cable kit, steeda tri-ax and way to much other stuff to list

  2. #22
    Senior Member wick's Avatar
    Join Date
    Sep 2006
    Location
    Carnegie
    Posts
    8,400
    Quote Originally Posted by DMmustangLX View Post
    nething
    Is this a new word?
    Rob
    1 Monte SS. White.

    Banned dates
    11/27/08
    4/25/11
    3/28/12
    12/1/12
    There are more but that's all that was logged!!!

  3. #23
    Rollin in my 5.0 Shorty429's Avatar
    Join Date
    Apr 2008
    Location
    Greensburg, PA
    Posts
    2,247
    Quote Originally Posted by wick View Post
    Is this a new word?

    Black
    1998 GT- PI swap, 3.73's, off road h pipe, flows & some suspension goodies

    White 1986 GT T-Tops- BBK shorties, RAM clutch/flywheel, Bassani catted x pipe, MSD ignition, MAC cai, LMM lowering springs, adjustable skocks & struts, MGW short throw, DD

    Black 2009 Yamaha YZF-R6- custom levers, -1 front sprocket, Jardine GP-1 exhaust, HIDs, custom undertail, custom black windscreen.

  4. #24
    Lovin my 302
    Join Date
    Sep 2006
    Location
    Chicora, Pa
    Posts
    116
    Quote Originally Posted by DMmustangLX View Post
    955.0 i raced u at the flash light drags two summers ago i had a black 5.0 hatch at the time u do nething to ur stang since?
    I put on a set of full length headers and switched from an H pipe to an X pipe, some tranny work and a little ignition work. I see you have a new car? Thats cool U like it?

  5. #25
    Lovin my 302
    Join Date
    Sep 2006
    Location
    Chicora, Pa
    Posts
    116
    Quote Originally Posted by ddmi-twin90gt View Post
    955.0 Your not from Pittsburgh! Be proud! say your from CHICORA!
    Silly ddmi you don't have a turbo car

  6. #26
    Senior Member
    Join Date
    Sep 2006
    Location
    pa
    Posts
    860
    I know. thats why it says in the sig now. 03 DSG Cobra vert.

  7. #27
    Lovin my 302
    Join Date
    Sep 2006
    Location
    Chicora, Pa
    Posts
    116
    Quote Originally Posted by ddmi-twin90gt View Post
    I know. thats why it says in the sig now. 03 DSG Cobra vert.
    Your the man

  8. #28
    Senior Member
    Join Date
    Sep 2006
    Location
    pa
    Posts
    860
    Quote Originally Posted by 955.0 View Post
    Your the man
    Now change yours to chicora damnit!

  9. #29
    Senior Member DMmustangLX's Avatar
    Join Date
    May 2008
    Location
    Pittsburgh
    Posts
    229
    Quote Originally Posted by wick View Post
    Is this a new word?

    haha yes i have started a new language i was just to lazy to write the word anything
    01' Gt=
    Mac 2.5 in. prochamber with high flow cats, mac exhaust, steeda strut tower brace and bbk alum. underdrive pullies and more to come

    87' Notchback 5.0 =
    3.55's, rebuilt t-5, upper and lower control arms, steeda subframes, torque box reinforcements, mac girdle, s.s brake lines, b.s flywheel, ram hd powergrip clutch, steeda adj. clutch cable kit, steeda tri-ax and way to much other stuff to list

  10. #30
    Lovin my 302
    Join Date
    Sep 2006
    Location
    Chicora, Pa
    Posts
    116
    Quote Originally Posted by ddmi-twin90gt View Post
    Now change yours to chicora damnit!
    I'll try

  11. #31
    Senior Member DMmustangLX's Avatar
    Join Date
    May 2008
    Location
    Pittsburgh
    Posts
    229
    Quote Originally Posted by 955.0 View Post
    I put on a set of full length headers and switched from an H pipe to an X pipe, some tranny work and a little ignition work. I see you have a new car? Thats cool U like it?

    thats cool yeah the car in the pic was my first car i still have it, but i wrecked the hatchback its gone. i am in the process of building a 87 notchback all kinds of goodies going in this one it will be ready by the spring. u ever get that clutch cable figured out?
    01' Gt=
    Mac 2.5 in. prochamber with high flow cats, mac exhaust, steeda strut tower brace and bbk alum. underdrive pullies and more to come

    87' Notchback 5.0 =
    3.55's, rebuilt t-5, upper and lower control arms, steeda subframes, torque box reinforcements, mac girdle, s.s brake lines, b.s flywheel, ram hd powergrip clutch, steeda adj. clutch cable kit, steeda tri-ax and way to much other stuff to list

  12. #32
    Lovin my 302
    Join Date
    Sep 2006
    Location
    Chicora, Pa
    Posts
    116
    Quote Originally Posted by DMmustangLX View Post
    thats cool yeah the car in the pic was my first car i still have it, but i wrecked the hatchback its gone. i am in the process of building a 87 notchback all kinds of goodies going in this one it will be ready by the spring. u ever get that clutch cable figured out?
    Thats cool I love a Fox!!

    I've got it figured out to be a clutch fork thats to short and that caused my bushings in my pedal to go.

  13. #33
    Senior Member
    Join Date
    Sep 2006
    Location
    pa
    Posts
    860
    Alright! you did it..

  14. #34
    Lovin my 302
    Join Date
    Sep 2006
    Location
    Chicora, Pa
    Posts
    116
    Quote Originally Posted by ddmi-twin90gt View Post
    Alright! you did it..
    . U like that?

  15. #35
    Senior Member DMmustangLX's Avatar
    Join Date
    May 2008
    Location
    Pittsburgh
    Posts
    229
    Quote Originally Posted by 955.0 View Post
    Thats cool I love a Fox!!

    I've got it figured out to be a clutch fork thats to short and that caused my bushings in my pedal to go.
    Yeah i love foxes too, this is now my 3rd one. i like this one the most cause its a notch. thats cool u got the clutch issue figured out. u do any gears in urs yet?
    01' Gt=
    Mac 2.5 in. prochamber with high flow cats, mac exhaust, steeda strut tower brace and bbk alum. underdrive pullies and more to come

    87' Notchback 5.0 =
    3.55's, rebuilt t-5, upper and lower control arms, steeda subframes, torque box reinforcements, mac girdle, s.s brake lines, b.s flywheel, ram hd powergrip clutch, steeda adj. clutch cable kit, steeda tri-ax and way to much other stuff to list

  16. #36
    Lovin my 302
    Join Date
    Sep 2006
    Location
    Chicora, Pa
    Posts
    116
    Quote Originally Posted by DMmustangLX View Post
    Yeah i love foxes too, this is now my 3rd one. i like this one the most cause its a notch. thats cool u got the clutch issue figured out. u do any gears in urs yet?
    Have not had much time to work on car. Yea I put in a set of 373's and Moser 31 splines and a 8 cutch diff, worked out nice

  17. #37
    Senior Member DMmustangLX's Avatar
    Join Date
    May 2008
    Location
    Pittsburgh
    Posts
    229
    [quote=955.0;150627]Have not had much time to work on car. Yea I put in a set of 373's and Moser 31 splines and a 8 cutch diff, worked out nice[/quot


    That sucks, i hear ya i've been working on my car on saturdays and sundays thats about it. whats ur car rev at on the highway with the 3.73's
    01' Gt=
    Mac 2.5 in. prochamber with high flow cats, mac exhaust, steeda strut tower brace and bbk alum. underdrive pullies and more to come

    87' Notchback 5.0 =
    3.55's, rebuilt t-5, upper and lower control arms, steeda subframes, torque box reinforcements, mac girdle, s.s brake lines, b.s flywheel, ram hd powergrip clutch, steeda adj. clutch cable kit, steeda tri-ax and way to much other stuff to list

  18. #38
    Lovin my 302
    Join Date
    Sep 2006
    Location
    Chicora, Pa
    Posts
    116
    [quote=DMmustangLX;150777]
    Quote Originally Posted by 955.0 View Post
    Have not had much time to work on car. Yea I put in a set of 373's and Moser 31 splines and a 8 cutch diff, worked out nice[/quot


    That sucks, i hear ya i've been working on my car on saturdays and sundays thats about it. whats ur car rev at on the highway with the 3.73's
    At about sixty I'm probally close to 3000 Rpms, not to bad dropped my mileage about 2 MPG but WELL worth it!!

Similar Threads

  1. c-4 issues
    By black 94 in forum Fox-SN95
    Replies: 0
    Last Post: 08-27-2012, 02:31 PM
  2. I have issues.......
    By Dan B. in forum Other Ford
    Replies: 10
    Last Post: 04-25-2012, 07:27 PM
  3. A few issues/questions
    By RUSH2112 in forum General Tech
    Replies: 5
    Last Post: 06-29-2007, 10:24 AM
  4. 95 5.0 issues
    By 955.0 in forum Fox-SN95
    Replies: 14
    Last Post: 12-01-2006, 11:36 AM
  5. spec 2 clutch issues
    By venom in forum Fox-SN95
    Replies: 17
    Last Post: 10-25-2006, 11:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •