AODE for sale

[TJH64]

For sale is an AODE out of my 95 GT. 58,xxx miles. Shifts great.
5.0 bolt pattern.

Included is the stock torque converter, brand new shifter cable, stock shifter. Had a new transmission range (TR) sensor installed at 57,000 miles. The cable and sensor were over $150 themselves.

Sell for $200 obo

I also have the compatible computer for this tranny also. $25

[89lx 5.0HO]

will it work on my 89 mustang??

[TJH64]

This tranny is a direct bolt-in or the 94/95, which is electronically controlled. For your application you need an AOD.

[83dropboy]

It has been done, but not a direct bolt-in:


What parts do I need to install an AODE or 4R70W into a fox body (1979-1993) mustang?

You will need the following items:

• AODE or 4R70W transmission with the proper bolt pattern for your engine.
• Baumanator TCS
• Dipstick tube and dipstick from a '94-'95 AODE equipped Mustang (may not clear all headers)
• Backset transmission crossmember
• flexplate from AOD equipped fox body Mustang (imbalance weight must match engine 1968-1980 302 = 28 oz. 1981-2001 = 50 oz.)
• shifter cable from 1994-95 Mustang
• transmission inspection plate and transmission to engine block separator plate from an AOD equipped fox body Mustang
• If the AODE or 4R70W transmission you sourced is from a Mustang it will have the correct shift lever if not, you will need a shift lever from a '94-'04 Mustang application.

Obviously, if you are converting from an AOD you will have most of these components. The other components are listed here in case you are wisely changing from a manual trans to an automatic.