Results 1 to 10 of 10

Thread: Dohc

  1. #1
    Junkyard in junkyard out. ModularMike's Avatar
    Join Date
    Jun 2007
    Location
    Pittsburgh, PA
    Posts
    2,108

    Dohc

    I am told that my flywheel and flexplate and clutch and trans will work on a 03 Aviator motor, and the stock K-member is just fine, is this true? Thanks.


  2. #2
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    Quote Originally Posted by ModularMike View Post
    I am told that my flywheel and flexplate and clutch and trans will work on a 03 Aviator motor, and the stock K-member is just fine, is this true? Thanks.
    yep... as far as i know they are just taller, just like a 351w is taller than a 302..
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  3. #3
    Junkyard in junkyard out. ModularMike's Avatar
    Join Date
    Jun 2007
    Location
    Pittsburgh, PA
    Posts
    2,108
    Quote Originally Posted by Rodeheaver's View Post
    yep... as far as i know they are just taller, just like a 351w is taller than a 302..
    So its pretty much a drop in and tune? He has the Cobra intake and matched the ports. Would I need a newer ECU because my 98 GT isn't coil on plug? Or would I just run my coil packs? What would you charge to drop the engine in?


  4. #4
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    you could just run it with the coil packs, but you are gonna need 5.4 headers and a fe other little things i would guess..
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  5. #5
    Junkyard in junkyard out. ModularMike's Avatar
    Join Date
    Jun 2007
    Location
    Pittsburgh, PA
    Posts
    2,108
    Quote Originally Posted by Rodeheaver's View Post
    you could just run it with the coil packs, but you are gonna need 5.4 headers and a fe other little things i would guess..
    Sounds to me he has headers and catted mid-pipe and Cobra intake and everything except an ECM which he says I can use the one I have. Would you or Mike do the swap? I know some special things come up so a swap could be from any price but do you guys have a rough estimate if I have all the parts?


  6. #6
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    shoot, i could put that engine in a vw bus and make it fly!!! LOL, just give me a call at the shop if you wanna talk it over..
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  7. #7
    On the down low cam303's Avatar
    Join Date
    Aug 2006
    Posts
    978
    Quote Originally Posted by Rodeheaver's View Post
    you could just run it with the coil packs, but you are gonna need 5.4 headers and a fe other little things i would guess..
    He said aviator which is a 4.6. I think you are mistaking it for a navagator 5.4.

  8. #8
    Senior Member Rodeheaver's's Avatar
    Join Date
    Sep 2006
    Location
    McClellandtown
    Posts
    3,482
    Quote Originally Posted by cam303 View Post
    He said aviator which is a 4.6. I think you are mistaking it for a navagator 5.4.
    oh.. then he should have no problem at all throwing it in there...
    2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
    www.Rodeheavershotrod.com

  9. #9
    Junkyard in junkyard out. ModularMike's Avatar
    Join Date
    Jun 2007
    Location
    Pittsburgh, PA
    Posts
    2,108
    Yeah its a 4.6 just its for a good deal and its supposedly low mile so I would have a little 60hp-ish increase and have a fresh engine to start from unlike my old 115.2k SOHC.


  10. #10
    Nothing clever to say.... jaa55's Avatar
    Join Date
    Sep 2007
    Location
    Dayton PA
    Posts
    3,795
    well just bought an aviator and its a fast SUV
    03 Torch Red Anni. Ed. Cobra

    11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD

    01 cobra: traded

    93 LX Modular 4v swap
    Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD

Similar Threads

  1. 4V DOHC replacements
    By scott5 in forum The Bar
    Replies: 15
    Last Post: 11-29-2009, 12:53 PM
  2. 4.6 DOHC and a 6-71 Blower
    By Ares in forum Pictures & Videos
    Replies: 5
    Last Post: 08-25-2009, 09:16 PM
  3. 95 4.6 dohc motor $600obo
    By fiveohmatt in forum Ford Vehicles
    Replies: 2
    Last Post: 08-04-2009, 08:15 PM
  4. navigator 5.4 DOHC
    By adamg302 in forum Ford Parts
    Replies: 0
    Last Post: 08-16-2008, 05:22 PM
  5. Mark VIII DOHC
    By euphoria717 in forum Other Ford
    Replies: 2
    Last Post: 10-20-2006, 10:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •