Results 1 to 20 of 25

Thread: Quaker City Opening Day

Hybrid View

  1. #1

    Quaker City Opening Day

    Its April 4th regular test and tune, 12-5pm! Who's all planning on going to Quaker?
    11.77@121.5 1.89 60' tuned by Aaron@RealTunePerformace
    Low Boost/Timing on pump gas
    Borg Warner S256, supporting mods. Next up E85 Tuned!


  2. #2
    GOT RUMBLE??? Balaska347's Avatar
    Join Date
    Jan 2007
    Location
    Belle Vernon
    Posts
    1,294
    I'll be at PRP, but it is nice to see QCR hanging in there.


    '89 Mustang GT
    '04.5 Duramax

    Jones Race Car Trailers
    www.jonesrv.com

  3. #3
    Senior Member casper gt's Avatar
    Join Date
    Oct 2007
    Location
    creighton pa
    Posts
    260
    +1^
    2014 301a GT a6
    5c circle d conv, 3.31's, kooks l/t's & orh, stock intake, bmr susp

  4. #4
    Walking on the wild side! Shadowstealth's Avatar
    Join Date
    Jul 2008
    Location
    south park
    Posts
    624
    quaker city? whats that
    2003 Cobra w/ very mild mods, Magnaflow catback and cold air intake

    1992 Mustang lx hatch back, cold air intake, underdrive pulleys, offroad h pipe, mac muffs with dumps.

    1988 Toyota pickup w/ 4inch suspension lift on BFG 33's Stainless steel header and full exhaust

    2005 Honda Trx 450R w/ protaper bars and grips, nerf bars and under body armor. ~for sale~


  5. #5
    GOT RUMBLE??? Balaska347's Avatar
    Join Date
    Jan 2007
    Location
    Belle Vernon
    Posts
    1,294
    A dragstrip in salem ohio


    '89 Mustang GT
    '04.5 Duramax

    Jones Race Car Trailers
    www.jonesrv.com

  6. #6
    Kickin it Old School somethingclever's Avatar
    Join Date
    Aug 2006
    Location
    Bentleyville
    Posts
    4,625
    Quote Originally Posted by Balaska347 View Post
    I'll be at PRP, but it is nice to see QCR hanging in there.

    x2 on both accounts..


    I will be going to Quaker atleast once this yr though...never been there before.
    -JOHN

    Carburetors and SAE wrenches.................


    Buy Made in the USA - It Matters.

  7. #7
    Senior Member
    Join Date
    Apr 2008
    Location
    Polar Vortex
    Posts
    6,031
    Quote Originally Posted by somethingclever View Post
    x2 on both accounts..


    I will be going to Quaker atleast once this yr though...never been there before.
    You have to let me know when you're going out we could drive out together.

  8. #8
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193
    For those that do not know what Quaker City Raceway is, its a 1/4 mile drag strip. It's a much nicer track than PRP and the staff there actually know how to run an effecient program.
    There's no gravel, no super high refreshment prices, and it's just a much nicer place to race and spend the day.
    Corvette Z06

    Growing up.............Not everyone does it!


  9. #9
    Formerly 2011 GB/CS & CST 03 03 OW SVT's Avatar
    Join Date
    Sep 2006
    Location
    Fuwkawee
    Posts
    5,151
    ^^^Yeah Quaker is a great place and the people are great. I don't know if i'll be there opening day or not but i do plan on going a couple of times this year. Its only a 45 min. drive from my house.

    quakercityraceway.com
    Last edited by 03 OW SVT; 02-16-2009 at 12:35 PM.
    17 Ram 1500 Big Horn Hemi
    16 Comp O GT Performance Pack
    03 Oxford white Cobra (Gone but not forgotten)

  10. #10
    Senior Member
    Join Date
    Apr 2008
    Location
    Polar Vortex
    Posts
    6,031
    Quote Originally Posted by gmkillr View Post
    For those that do not know what Quaker City Raceway is, its a 1/4 mile drag strip. It's a much nicer track than PRP and the staff there actually know how to run an effecient program.
    There's no gravel, no super high refreshment prices, and it's just a much nicer place to race and spend the day.

    I've heard QC is about two tenths slower than prp, is this true?? I've watched races out there but never ran myself...

  11. #11
    Kickin it Old School somethingclever's Avatar
    Join Date
    Aug 2006
    Location
    Bentleyville
    Posts
    4,625
    Quote Originally Posted by John4cam View Post
    You have to let me know when you're going out we could drive out together.
    Will do John....guy from work lives up that way and is hoping to get his 72 challenger back to the track...for a mild 340 car it runs good...(12.2's I think)
    -JOHN

    Carburetors and SAE wrenches.................


    Buy Made in the USA - It Matters.

  12. #12
    I'm glad QCR is hanging in there too. Once tracks close, they're usually done for. I've had some fun times out there, good memories.

    In my experience, I'm about a tenth, a little over, slower there compared to PRP.
    ChuckT
    Sponsored by
    Wholesale Transmission - New Kensington
    Millerstown Pic A Part

  13. #13
    Senior Member
    Join Date
    Apr 2008
    Location
    Polar Vortex
    Posts
    6,031
    Quote Originally Posted by somethingclever View Post
    Will do John....guy from work lives up that way and is hoping to get his 72 challenger back to the track...for a mild 340 car it runs good...(12.2's I think)

    Sounds like a sweet ride..

  14. #14
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    I am planning to run both of the UMTR races at Quaker City this year. The first is mid May, so that's likely the first chance I will have to get over there.
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  15. #15
    never stock biminiLX's Avatar
    Join Date
    Jul 2007
    Location
    Beaver
    Posts
    2,406
    Would also like to go and check it out this year, pretty close to me.
    -J
    '91 LX Bimini Blue
    427"/88mm on 16psi

    '99 Contour SVT
    Clean DD

  16. #16
    l3@l)&#l_#$$ AdamantiumSilvr's Avatar
    Join Date
    Dec 2008
    Location
    Natrona Heights PA
    Posts
    3,056
    Might of been there once when I was real, real almost un-rememberablely young. Heard about it alot, n alwayz wanted to head out. I think it is a pretty good drive thou for me. Even PRP is a little drive, I'll venture out n about here and there, but I'm mostly down for keepin our Great city of Pittsburgh's one open!
    Bu-2000-bash
    ALLSQUAD
    Steel City Muscle Cars
    CarCruises
    Flashlight Drags
    NMRA
    UMTR
    Modded Mustangs
    NHSCC

  17. #17
    From Natrona Heights, QCR is roughly about an hour and 15 minutes, maybe a tick more. Turnpike west to Ohio, second exit in Ohio, south on Route 7, right on Route 164, go about a half mile or so, right on 165, stay on 165 for 10 minutes or so, and the track will be on the left.
    ChuckT
    Sponsored by
    Wholesale Transmission - New Kensington
    Millerstown Pic A Part

  18. #18
    Member
    Join Date
    Nov 2007
    Location
    enon valley, pa
    Posts
    49
    I am going to be there weather permitting. I will be in a black 86 gt convertible with a cowl hood. Its my home track and i have been either racing or working there for about 10 years now. Have never taken this car out yet. Let me know if anyone wants to meet up to go out.
    I have done so much, with so little, for so long, that now i can do anything with almost nothing at all.

  19. #19
    Formerly 2011 GB/CS & CST 03 03 OW SVT's Avatar
    Join Date
    Sep 2006
    Location
    Fuwkawee
    Posts
    5,151
    Quote Originally Posted by fasttang757 View Post
    I am going to be there weather permitting. I will be in a black 86 gt convertible with a cowl hood. Its my home track and i have been either racing or working there for about 10 years now. Have never taken this car out yet. Let me know if anyone wants to meet up to go out.
    A few of us have talked about going for opening day. Will let you know.
    17 Ram 1500 Big Horn Hemi
    16 Comp O GT Performance Pack
    03 Oxford white Cobra (Gone but not forgotten)

  20. #20
    Everything I have is slow 2001GTTT's Avatar
    Join Date
    May 2007
    Location
    Ligonier, PA
    Posts
    6,365
    kev if theres some of you heading out let me know
    2018 Jeep Grand Cherokee
    1931 Ford Model A - Project
    1991 BMW 325iX
    1978 Ford F150
    1952 Ford F2 - Project
    2001 Mustang GT - gone but never forgotten. RIP.

Similar Threads

  1. Quaker City
    By mustang50lx in forum Drag Racing
    Replies: 62
    Last Post: 12-02-2010, 02:26 PM
  2. Quaker City
    By schiavon8241 in forum Drag Racing
    Replies: 10
    Last Post: 05-06-2008, 11:24 PM
  3. Getting ready for opening day
    By speedracer in forum General Tech
    Replies: 29
    Last Post: 04-24-2008, 07:09 PM
  4. Opening Day at PRP
    By molnartr in forum Drag Racing
    Replies: 64
    Last Post: 03-29-2008, 08:08 PM
  5. prp opening day!
    By yellowstang03 in forum The Bar
    Replies: 15
    Last Post: 03-24-2008, 09:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •