Are the splines straight on the axle? They can twist with wheel-hop, especially stock axles.
Are the splines straight on the axle? They can twist with wheel-hop, especially stock axles.
Mark Lowry
Wolfpack Speed, Inc.4290 Campbells Run RdPittsburgh, PA 15205(412) 279-4902
Originally Posted by mlowry1260
that could be a good possibility the rear end did experience a good hand full of trips to PRP and the FLD's when i disassembled the rear end the axles came out very easy and the carrier was not removed from the rear end. i will check to see if the splines are twisted thanks for the info
01' Gt=
Mac 2.5 in. prochamber with high flow cats, mac exhaust, steeda strut tower brace and bbk alum. underdrive pullies and more to come
87' Notchback 5.0 =
3.55's, rebuilt t-5, upper and lower control arms, steeda subframes, torque box reinforcements, mac girdle, s.s brake lines, b.s flywheel, ram hd powergrip clutch, steeda adj. clutch cable kit, steeda tri-ax and way to much other stuff to list
Posting Permissions
Reply With Quote
Bookmarks