updated list of parts forsale

**fastfox91** · 03-03-2009, 11:28 AM

i cant edit my old post so im just gonna make a updated one and with pic of everything.
polished votech strim kit for 87-93 with extras, upr power pipe, 2.95 and 2.75 blower pulleys, extra belts for both pulleys in great shape 1800.00 shipped

tremec 3550 tranny with spec stage 3 clutch, pro 5.0 shifter and aluminum drive shaft just rebuilt with no run time 1400.00

trickflow twisted wedge heads with new track heat 600 lift springs 1100.00

holley systemax intake great shape 500.00

moser 4 lug 31 spline axles with moser long studs less than 6000 miles on them 200.00

trw forged 306 pistons cut for inline and canted valve heads like new motor only started 2 times then went to different motor 200.00

crane coil great shape 30.00

taylor battery relocation kit with cut off switch 150.00 shipped

like new mickey thompson 26x11.50 15 et streets great shape still have the tits on them in spots 275.00

walbro 255hp inline fuel pump only a very short run time

auto meter 10k silver tach 150.00

autometer ultra light voltage gauge 2 5/8 25.00

auto meter triple pillar for for fox and 2 5/8 gauges

autometer gauge cage for 3 2 5/8 gauges for center vents on a fox 25.00
sorry i forgot to take a pic

white face overlay gauges for a fox 15.00

**Martin0660** · 03-03-2009, 12:27 PM

Price on in line 255HP pump?

On Edit: Price shipped to 1561 seeing how far away you are ;)

**97LaserRed** · 03-03-2009, 02:41 PM

I'm guessing driveshaft is for t-56. Wouldn't fit a T-5?

**Silverhatch** · 03-03-2009, 02:55 PM

Would you ship the volt gauge? I'd pay shipping. Can't be more than a dollar or two. 15022 zip

**fastfox91** · 03-03-2009, 03:29 PM

martin i can do 85 shipped on the pump usps not sure how far u are from me

97laser the drive shaft will work on a t5

luxury i can ship the gauge 28.00 shipped

my paypal is fastfox91@yahoo.com

**Silverhatch** · 03-03-2009, 03:49 PM

Check your paypal!

**Troll** · 03-03-2009, 06:27 PM

will that 3550 tranny bolt up to a 4.6L ?

**97LaserRed** · 03-03-2009, 07:03 PM

how much for the driveshaft??

**fastfox91** · 03-03-2009, 10:19 PM

got the money thanks luxury if i can get off work early enough tomorrow ill get it out then if not it will go out thurs thanks

troll im not sure i believe so as long as u have the right bell housing, a buddy of mine has one in his 98 cobra

97lazer i want 150 for the drive shaft

**97LaserRed** · 03-03-2009, 11:57 PM

pm sent

**fastfox91** · 03-04-2009, 12:43 AM

pm returned

**thebreeze72** · 03-04-2009, 07:44 PM

just wondering how that supercharger you have would work on my bone stock 90 lx 5.0 with 65k mi. on it also what extra's do you think i would need i might have some of the stuff. also how much torque do you think that tremec would hold up to i'm building a 420 inch 600+hp 550 ft. lbs. stroker in a 93 coupe , also what width rim did you run with the et's?

**tjvantana** · 03-05-2009, 12:01 AM

whats the model number on the trick flows? are they the street or track heads?

**fastfox91** · 03-05-2009, 12:06 AM

Originally Posted by thebreeze72

just wondering how that supercharger you have would work on my bone stock 90 lx 5.0 with 65k mi. on it also what extra's do you think i would need i might have some of the stuff. also how much torque do you think that tremec would hold up to i'm building a 420 inch 600+hp 550 ft. lbs. stroker in a 93 coupe , also what width rim did you run with the et's?

the supercharger would work good on there a local guy had a stone stock 92 gt with a stock pullied s trim running 12.6s with that being the only mod, as for the tremec it held my 10.6 car with no problems so i would think u would be good to go, the rims i had were 9in wide with 5.5 back spacing

**fastfox91** · 03-05-2009, 12:06 AM

Originally Posted by tjvantana

whats the model number on the trick flows? are they the street or track heads?

they a trick street heats but have new 600 lift track heat springs.

**fastfox91** · 03-19-2009, 09:55 PM

still have alot of this stuff must go 1000.00 for the heads
175 for the axles
175 for the pistons
80 for the inline pump
make offer on the pillar pod
125 for the taylor battery box with cut off switch