Results 1 to 8 of 8

Thread: Intercooler finally showed up and ordered new tires.

  1. #1
    Senior Member Jivepepper's Avatar
    Join Date
    Aug 2007
    Location
    Morgantown WV.
    Posts
    563

    Intercooler finally showed up and ordered new tires.

    The intercooler showed up today and looks good for the most part but there was a little cosmetic damage. I don't have time to send it back I'm just going to except it.









    I also ordered some new MT 315/35/17's DR's and some Sumitomo 255/45/17's for the front.

    I have had the MT's before in this size with the newer thread pattern and absolutely loved them. I had to settle for BFG's DR's in same size last time because the MT's were on back order. They had half the traction, wore out quicker, and preformed worse in the rain.

    The newer thread pattern is a step up from the old design as far every day driving and preforms just as well at the track as the older pattern.

    I love these tires but they are not cheap for a tire I have to replace almost every year.

    MT 315/35/17 DR's


    These tires are good in the 275 and down just don't get the 315's the gaps are huge. The reason I like them is that they're only 67 a peice lol.

    Sumitomo 255/45/17's
    665/540 New times coming
    Old times with 516/453 11.10 @129 Best trap 130.69 -750' DA lol
    DYNO VID ---> http://www.youtube.com/watch?v=K9uOS732mdA

  2. #2
    SCS Addict Stangman701's Avatar
    Join Date
    Aug 2006
    Location
    Robinson Twp.
    Posts
    2,143
    Wow, that IC looks huge. How do those mickey's hold on the street? Do you have traction in 1st gear with them? I've got the 275's right now and they're awesome. I can nail it from a 1st gear roll and they flat out hook. Just wondering if the 315's would hold if I ever stepped up to some more power.
    2015 Charger Hellcat
    2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET

    85 GT
    Heads and Cam plus other bolt ons

    73 F250
    Lifted, 35's, 460 4spd

    Real name = Ray


  3. #3
    Slow Vehicles Team SonofaBish's Avatar
    Join Date
    Aug 2006
    Location
    Spencerport, NY
    Posts
    3,762
    Awesome!!! gotta love the MT's!!! On a warm day, I could hook all 700rwhp on a 245/55/16 tire...

    As for the Sumitomo's, I had those on the front as well - they're a fine tire, but i'll warn you, they're ugly... they just don't have that good looking sidewall that a lot of tires have now-a-days!
    2015 Corvette Z06
    - Shark Grey / Kalahari
    - bolt-ons, tune, lots of carbon fiber (642/671 rwhp/tq)

  4. #4
    Senior Member Jivepepper's Avatar
    Join Date
    Aug 2007
    Location
    Morgantown WV.
    Posts
    563
    Quote Originally Posted by Stangman701 View Post
    Wow, that IC looks huge. How do those mickey's hold on the street? Do you have traction in 1st gear with them? I've got the 275's right now and they're awesome. I can nail it from a 1st gear roll and they flat out hook. Just wondering if the 315's would hold if I ever stepped up to some more power.
    Well if your running a 17" they should do a little better than the 275.

    Quote Originally Posted by SonofaBish View Post
    Awesome!!! gotta love the MT's!!! On a warm day, I could hook all 700rwhp on a 245/55/16 tire...

    As for the Sumitomo's, I had those on the front as well - they're a fine tire, but i'll warn you, they're ugly... they just don't have that good looking sidewall that a lot of tires have now-a-days!
    Yeah these are my second set of sumi's they're fine in a 275 and down but stay away from the 315's the only thing they do is increase the tire gaps. Right now I have 245 sumi's in the front. I bought some 315's when I first bought the wheels and the gaps were huge so I sold them a week later lol.

    The mt's I had before the bfg's wore a lot better and handled better in the wet and the dry than the BFG's. First time I used them I ran a 1.67 60'. But that was the newer thread pattern.

    look at the gap on these 315 sumitomos lol.
    665/540 New times coming
    Old times with 516/453 11.10 @129 Best trap 130.69 -750' DA lol
    DYNO VID ---> http://www.youtube.com/watch?v=K9uOS732mdA

  5. #5
    Formerly 2011 GB/CS & CST 03 03 OW SVT's Avatar
    Join Date
    Sep 2006
    Location
    Fuwkawee
    Posts
    5,151
    Those MTs have a similar tread pattern as the Nitto 555DR's
    17 Ram 1500 Big Horn Hemi
    16 Comp O GT Performance Pack
    03 Oxford white Cobra (Gone but not forgotten)

  6. #6
    Senior Member Jivepepper's Avatar
    Join Date
    Aug 2007
    Location
    Morgantown WV.
    Posts
    563
    Quote Originally Posted by CST 03 View Post
    Those MTs have a similar tread pattern as the Nitto 555DR's
    Yes but hook better. The best of both worlds.
    665/540 New times coming
    Old times with 516/453 11.10 @129 Best trap 130.69 -750' DA lol
    DYNO VID ---> http://www.youtube.com/watch?v=K9uOS732mdA

  7. #7
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193
    Your going to intercool your setup?

    Where did you get that intercooler?
    How much?
    Corvette Z06

    Growing up.............Not everyone does it!


  8. #8
    Senior Member Jivepepper's Avatar
    Join Date
    Aug 2007
    Location
    Morgantown WV.
    Posts
    563
    Quote Originally Posted by gmkillr View Post
    Your going to intercool your setup?

    Where did you get that intercooler?
    How much?
    It already was intercooled I just went to a slightly larger one. The orginal one was 31x12x3 and the new one is 31x12x4.

    I bought it off ebay from CXracing for 159 shipped.

    I'll sell the old one for 95 shipped if interested.
    665/540 New times coming
    Old times with 516/453 11.10 @129 Best trap 130.69 -750' DA lol
    DYNO VID ---> http://www.youtube.com/watch?v=K9uOS732mdA

Similar Threads

  1. New Wheels and Tires on Finally!!!
    By THE BIG KOALA in forum Pictures & Videos
    Replies: 16
    Last Post: 08-24-2012, 03:38 PM
  2. Parts Ordered
    By no1fordgirl in forum Fox-SN95
    Replies: 5
    Last Post: 02-27-2011, 02:09 PM
  3. Ordered my new pistol :)
    By Rio94gt in forum The Bar
    Replies: 13
    Last Post: 01-19-2009, 10:12 AM
  4. Look what showed up here at work yesterday
    By blkp42e in forum The Bar
    Replies: 27
    Last Post: 09-23-2008, 11:42 PM
  5. New IW crank dampner showed up today, wow!
    By Jivepepper in forum SN95-New Edge
    Replies: 0
    Last Post: 07-15-2008, 09:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •